2013年8月30日星期五

最高のIBMの000-109試験対策材料を無料でダウンロード

JapanCertは正確な選択を与えて、君の悩みを減らして、もし早くてIBM 000-109認証をとりたければ、早くてJapanCertをショッピングカートに入れましょう。あなたにとても良い指導を確保できて、試験に合格するのを助けって、JapanCertからすぐにあなたの通行証をとります。

000-109試験はIBMの認定試験の一つですが、もっとも重要なひとつです。IBMの000-109の認定試験に合格するのは簡単ではなくて、JapanCertは000-109試験の受験生がストレスを軽減し、エネルギーと時間を節約するために専門研究手段として多様な訓練を開発して、JapanCertから君に合ったツールを選択してください。

IBMの000-109認定試験を一回合格するためには必ず良い準備しなければなりません。完全な知識がこの高度専門の試験に合格するのは必要でJapanCertは君にこれらの資源を完全な需要に備わっています。

短い時間に最も小さな努力で一番効果的にIBMの000-109試験の準備をしたいのなら、JapanCertのIBMの000-109試験トレーニング資料を利用することができます。JapanCertのトレーニング資料は実践の検証に合格すたもので、多くの受験生に証明された100パーセントの成功率を持っている資料です。JapanCertを利用したら、あなたは自分の目標を達成することができ、最良の結果を得ます。

生活で他の人が何かやったくれることをいつも要求しないで、私が他の人に何かやってあげられることをよく考えるべきです。職場でも同じです。ボスに偉大な価値を創造してあげたら、ボスは無論あなたをヘアします。これに反して、あなたがずっと普通な職員だったら、遅かれ早かれ解雇されます。ですから、IT認定試験に受かって、自分の能力を高めるべきです。 JapanCertのIBMの000-109試験問題集はあなたが成功へのショートカットを与えます。IT 職員はほとんど行動しましたから、あなたはまだ何を待っているのですか。ためらわずにJapanCertのIBMの000-109試験トレーニング資料を購入しましょう。

JapanCertはその近道を提供し、君の多くの時間と労力も節約します。JapanCertはIBMの000-109認定試験に向けてもっともよい問題集を研究しています。もしほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。ass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。

試験番号:000-109問題集
試験科目:IBM 「Virtualization Technical Support for AIX and Linux - v2 」
問題と解答:全180問

IBMの000-109認定試験はJapanCertの最優秀な専門家チームが自分の知識と業界の経験を利用してどんどん研究した、満足IBM認証受験生の需要に満たすの書籍がほかのサイトにも見えますが、JapanCertの商品が最も保障があって、君の最良の選択になります。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/000-109.html

NO.1 An administrator has a requirement to back up a VIO server (VIOS) so that it can be rebuilt in the event
of a disaster.
Which set of actions will achieve this requirement.?
A. Backup all non rootvg volume groups using savevg. Backup all Storage Pool Information. Run a
mksysb of the system.
B. Save "Upgrade Data" on the HMC. Backup all non rootvg volume groups using savevg. Run a mksysb
of the VIOS with the -U flag.
C. Backup non rootvg structures using savevgstruct. Capture virtual mappings to a file using viosbr. Run a
backupios
D. Capture the virtual network tuning to a file using the optimizenet command. Capture all virtual device
attributes to a file using the lsattr command. Run a backupios.
Answer: C

IBM   000-109   000-109   000-109認証試験

NO.2 An administrator is preparing to upgrade the environment's dual Virtual I/O servers (VIOS) from V1.2
to V2.1
What must considered in preparation for this upgrade?
A. All client LPARs must be shutdown as both VIO servers have to be upgraded to V2.1 at the same time.
B. The VIOS must be upgraded to the latest fixpack of V1.5 before upgrading to V2.1.
C. The only upgrade method that will be supported is using NIM because the current VIOS is lower than
V1.3.
D. VIOS V2.1 requires AIX clients to be running AIX V6.1 at a minimum.
Answer: B

IBM   000-109認証試験   000-109   000-109練習問題

NO.3 How can an existing AIX 5.2 LPAR, which is using SAN storage, be migrated into a versioned WPAR
(Workload Partition)?
A. Using LPM, but downtime will be required.
B. Dynamically using LAM.
C. Backup and restore a mksysb.
D. Rezone the SAN storage and use NPIV.
Answer: C

IBM認証試験   000-109   000-109

NO.4 Which of the following is required to support AME?
A. AIX LPARs
B. Virtual I/O Server
C. A maximum of 4GB of RAM per LPAR
D. On-demand memory feature enabled
Answer: A

IBM   000-109認定試験   000-109認定証   000-109

NO.5 What tool can an architect use to determine which is the smallest POWER7 server that will provide
equal or better overall performance than a POWER5 570?
A. Facts and Features Guide
B. LPAR Validation Tool
C. Configurator for eBusiness
D. Server Magic
Answer: A

IBM過去問   000-109   000-109認定資格

NO.6 A Linux LPAR is configured using 802.1Q.
The virtual Ethernet device is configured as an 802.1Q compatible adapter and has VLAN ID 5 configured
in the 802.1Q additional VLAN field.
The administrator runs the following commands on the Linux LPAR shell without errors:
vconfig add eth0 5ifconfig eth0 10.0.0.2 netmask 255.255.255.0
When the administrator tries to ping 10.0.0.1, the request times out.
What is the problem?
A. The VLAN ID should be in the VLAN-ID field in the virtual Network device configuration.
B. The administrator is using the incorrect Ethernet device.
C. The 8021q module is not loaded.
D. The 802.1Q interfaces are not supported on Linux on Power Systems servers.
Answer: A

IBM問題集   000-109   000-109   000-109

NO.7 An administrator must remove any installed efixes before attempting to install a new VIO Fix Pack.
Which VIO command will advise if any VIO efixes are actually present?
A. lslpp
B. emgr
C. lssw
D. oem_platform_level
Answer: C

IBM認証試験   000-109問題集   000-109認証試験   000-109

NO.8 Which interface must be used to provide virtualization of tape library devices to client LPARs?
A. USB
B. LTO
C. Virtual SCSI
D. Virtual Fibre Channel
Answer: D

IBM認定証   000-109   000-109過去問

NO.9 An administrator has the following configuration on a VIO Server:
Why is this error being displayed?
A. ent3 is configured as 'standard' instead of '802.3ad'
B. ent3 is a LHEA port and requires the -L flag
C. ent3 has no interface connected
D. ent3 is controlled by the SEA
Answer: D

IBM   000-109認定資格   000-109認定資格   000-109認定試験

NO.10 The wlmstat -@ 2 command has been run from a global environment with the following results:
What action can an administrator take to set limits, so that both server1 and server2 use the same amount
of CPU resources?
A. Use the cpu_deallocate -P command to reduce the CPU resources on server2
B. Use the chsysres command to assign the same CPU attributes to both servers.
C. Use the chwpar -R command to set the CPU attributes for each server.
D. Use the syncwpar -E command to copy the CPU resource allocation from server1 to server2.
Answer: C

IBM認証試験   000-109   000-109問題集   000-109問題集

NO.11 An administrator is creating several LPARs on a new Power Systems server. The administrator knows
that Live Partition Mobility (LPM) will be used to distribute the workload between this new machine and
several others in the environment.
In addition to ensuring all storage is allocated through Virtual IO servers, what else must the administrator
take into consideration when creating the new LPARs?
A. LPAR names in the environment must be unique.
B. Redundant error path reporting must be configured.
C. Only LPARs belonging to the same workload group can be moved between servers.
D. The Virtual IO server code level must be the same across all servers.
Answer: A

IBM   000-109問題集   000-109参考書

NO.12 An LPAR is configured using Virtual IO. It has two Virtual SCSI adapters, connecting it to two VIO
servers.
The disks presented over Virtual SCSI are available across both Virtual SCSI adapters (2 paths).
Assuming 20 disks are required, what is the maximum recommended queue depth to maximize
performance?
A. 20
B. 22
C. 510
D. 512
Answer: A

IBM   000-109   000-109   000-109参考書

NO.13 An administrator is performing a Live Partition Mobility (LPM) operation between two servers managed
by different HMCs.
While monitoring the performance of the partition, the virtual console window suddenly closes. What is the
most likely cause?
A. The virtual console is controlled by the HMC and closes when the second takes control of the partition.
B. The virtual console is a connection to the FSP of the physical server and closes when the LPAR
migrates.
C. The SSH keys have not been exchanged between HMCs.
D. The FSP has the MAC address for the first HMC cached in NVRAM.
Answer: B

IBM   000-109問題集   000-109   000-109参考書   000-109

NO.14 What will cause a broadcast storm when configuring redundant VIO servers with SEA failover?
A. The secondary SEA is brought online before the configured primary SEA.
B. A mismatch of defined VLANs between the primary and secondary SEA.
C. The secondary SEA is created before enabling failover on the primary SEA.
D. Incorrect EtherChannel configuration on one SEA
Answer: C

IBM   000-109   000-109練習問題   000-109問題集

NO.15 A Power 720 is being used to build 2 environments: Test and Production, with 2 LPARs in each
environment. Processor resources must be separated between the Test and Production environments to
reduce possible contention, while still being able to share processor resources inside each own
environment.
What are the two features required, as a minimum, to accomplish this? (Select 2)
A. IVM
B. HMC
C. PowerVM Express
D. PowerVM Standard
E. IVE
F. IBM Systems Director
Answer: B,D

IBM認定証   000-109練習問題   000-109過去問   000-109   000-109問題集   000-109認定証

NO.16 An administrator is designing a new system for their existing batch environment. The current system is
a POWER5 570 with 16 cores and 128GB of RAM with a single LPAR running AIX 5.3. It takes 12 hours
to run their large batch job which is heavily CPU bound on 4 the available CPUs.
The new system will be a Power 770 with 16 cores, 128GB of RAM and the LPAR will run AIX 6.1.What
should be done to maximize the batch performance?
A. Activate TurboCore mode during batch processing
B. Disable Simultaneous Multi-threading
C. Disable Multiple Shared Processor Pools
D. Set the processor compatibility mode to POWER7
Answer: B

IBM認証試験   000-109問題集   000-109参考書   000-109認証試験   000-109

NO.17 Requirements for a disaster recovery site are being collected. When considering restoring a VIO Server
mksysb to disaster recovery hardware,
what is required to ensure automatic virtual device recreation?
A. LPAR profiles must be accurately recreated on the foreign machine
B. Backups of both mksysb and user-defined structures are required from the VIO Server
C. The foreign machine must be of the same model and type
D. Configuration of the existing HMC needs to be preserved
Answer: A

IBM過去問   000-109認定証   000-109認証試験   000-109

NO.18 An administrator is attempting to configure a new deployment of 56 POWER7 Blades across 4 IBM
BladeCenter H chassis. Each blade will be installed with an IVM and 2 LPARs.IVM is installed and the
administrator checks that both LHEA ports are reporting a Link State of "Up." 2 LPARs are created and the
network traffic balanced by allocating one LHEA port to the first LPAR, the second port to the other. After
successfully installing the first LPAR via NIM, the administrator finds the second LPAR fails to netboot.
What should the administrator verify on the BladeCenter Chassis?
A. That 4 power supplies (PSU) have been installed.
B. That both the external LHEA ports have been cabled.
C. That a secondary I/O module has been installed and cabled.
D. That the Multi-Core Scaling (MCS) attribute is correctly set on both LHEA ports.
Answer: C

IBM   000-109参考書   000-109過去問   000-109認定試験   000-109

NO.19 An architect is looking at the implications of uncapped weights for a new POWER7 system. The
system will consist of four uncapped logical partitions with the following weightings:
Assuming all partitions have equal entitlement and virtual processor configurations in the partition profiles,
and request additional resources from the shared processor pool over a period of 1000 cycles, how many
cycles will be allocated to LPAR B?
A. 150
B. 250
C. 300
D. 1000
Answer: C

IBM認定証   000-109   000-109認証試験   000-109   000-109   000-109過去問

NO.20 When attempting to install a VIO client using NIM, an adminstrator finds that no disks are available for
installation. The disks are provided by NPIV through the virtual Fibre Channel adapter as described here:
Which of the following explains why is the administrator unable to see the disks?
A. The virtual fibre channel device has not been assigned to the client.
B. The HBA on the VIO server is not connected to the SAN.
C. The fibre device drivers are missing from the SPOT.
D. The LUNs have been incorrectly zoned.
Answer: D

IBM過去問   000-109参考書   000-109   000-109参考書   000-109

今の多士済々な社会の中で、IT専門人士はとても人気がありますが、競争も大きいです。だからいろいろな方は試験を借って、自分の社会の地位を固めたいです。000-109認定試験はIBMの中に重要な認証試験の一つですが、JapanCertにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってIBM 000-109認証試験に参加する方に対して問題集を研究続けています。

没有评论:

发表评论