2014年3月31日星期一

Nortel 920-260認定試験に合格できる不可欠なツール

JapanCertのNortelの920-260試験トレーニング資料の知名度が非常に高いことを皆はよく知っています。JapanCert は世界的によく知られているサイトです。どうしてこのような大きな連鎖反応になりましたか。それはJapanCertのNortelの920-260試験トレーニング資料は適用性が高いもので、本当にみなさんが良い成績を取ることを助けられるからです。

JapanCertの商品は100%の合格率を保証いたします。JapanCertはITに対応性研究続けて、高品質で低価格な問題集が開発いたしました。JapanCertの商品の最大の特徴は20時間だけ育成課程を通して楽々に合格できます。

みなさんにJapanCertを選ぶのはより安心させるためにJapanCertは部分のNortel 920-260試験材料がネットで提供して、君が無料でダウンロードすることができます。安心に弊社の商品を選ぶとともに貴重な時間とエネルギーを節約することができる。JapanCertは真実のNortel 920-260認証試験の問題集が100%で君の試験の合格を保証します。君の明るい将来を祈っています。

あなたはいまNortelの920-260認定試験にどうやって合格できるかということで首を傾けているのですか。Nortelの920-260認定試験は現在のいろいろなIT認定試験における最も価値のある資格の一つです。ここ数十年間では、インターネット・テクノロジーは世界中の人々の注目を集めているのです。それがもう現代生活の不可欠な一部となりました。その中で、Nortelの認証資格は広範な国際的な認可を得ました。ですから、IT業界で仕事している皆さんはNortelの認定試験を受験して資格を取得することを通して、彼らの知識やスキルを向上させます。920-260認定試験はNortelの最も重要な試験の一つです。この資格は皆さんに大きな利益をもたらすことができます。

試験番号:920-260問題集
試験科目:Nortel 「Nortel Secure Router Rls.10.1 Configuration and Management」
最近更新時間:2014-03-30
問題と解答:64

あなたに最大の利便性を与えるために、JapanCertは様々なバージョンの教材を用意しておきます。PDF版の920-260問題集は読みやすくて、忠実に試験の問題を再現することができます。テストエンジンとして、ソフトウェア版の920-260問題集はあなたの試験の準備についての進捗状況をテストするために利用することができます。もし試験の準備を十分にしたかどうかを確認したいなら、ソフトウェア版の920-260問題集を利用して自分のレベルをテストしてください。従って、すぐに自分の弱点や欠点を識別することができ、正しく次の920-260学習内容を手配することもできます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/920-260.html

NO.1 Which command delivered from SR/configure/interface/bundle wan/qos/class eng3> will remove VLAN
100 from a traffic class?
A.del_vlan 100
B.no vlan_id 100
C.rem_vlan_id 100
D.delete_vlan_id 100
Answer:D

Nortel   920-260   920-260認証試験   920-260認証試験

NO.2 Which two different rates of traffic can the Nortel Secure Router QoS classes provide? (Choose two.)
A.Burst Rate
B.Control Rate
C.Balloon Rate
D.Committed Rate
Answer:A D

Nortel練習問題   920-260   920-260   920-260認定試験   920-260認定試験

NO.3 Which factor affects the number of QoS classes you can create?
A.router licensing level
B.bandwidth on each T1
C.number of WAN bundles
D.total bandwidth available
Answer:D

Nortel認定証   920-260   920-260   920-260問題集

NO.4 The Nortel Secure Router 4134 supports performance monitoring and measurement. The feature,
known as SLA, provides performance measurements that include packet loss and round-trip delay. A
maximum number of active measurements can be associated with a single destination. What is the
maximum number of SLA active measurement(s) per destination?
A.1
B.5
C.8
D.16
E.unlimited
Answer:B

Nortel過去問   920-260   920-260   920-260   920-260認定資格

NO.5 On a Nortel Secure Router 4134, the QoS operations can be performed on chassis and module
components. The QoS processing functions performed by the Module QoS are listed. Which two
functions are performed in association with the Module QoS egress packet processing? (Choose two.)
A.Class of Service marking
B.traffic shaping
C.flow classification
D.traffic policing
E.scheduling
Answer:B E

Nortel   920-260認定資格   920-260問題集   920-260過去問   920-260

JapanCertは最新のC_HANAIMP131問題集と高品質の642-997問題と回答を提供します。JapanCertのLOT-410 VCEテストエンジンとMB5-854試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の1D0-610 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/920-260.html

Nortelの922-101の認定試験に合格すれば、就職機会が多くなります

JapanCertを通じて最新のNortelの922-101試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。

JapanCertは実際の環境で本格的なNortelの922-101の試験の準備過程を提供しています。もしあなたは初心者若しくは専門的な技能を高めたかったら、JapanCertのNortelの922-101の試験問題があなたが一歩一歩自分の念願に近くために助けを差し上げます。試験問題と解答に関する質問があるなら、当社は直後に解決方法を差し上げます。しかも、一年間の無料更新サービスを提供します。

JapanCertはその近道を提供し、君の多くの時間と労力も節約します。JapanCertはNortelの922-101認定試験に向けてもっともよい問題集を研究しています。もしほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。ass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。

現在、IT業界での激しい競争に直面しているあなたは、無力に感じるでしょう。これは避けられないことですから、あなたがしなければならないことは、自分のキャリアを護衛するのです。色々な選択がありますが、JapanCertのNortelの922-101問題集と解答をお勧めします。それはあなたが成功認定を助ける良いヘルパーですから、あなたはまだ何を待っているのですか。速く最新のJapanCertのNortelの922-101トレーニング資料を取りに行きましょう。

試験番号:922-101問題集
試験科目:Nortel 「Communication Server 1000 Linux Platform Architecture」
最近更新時間:2014-03-30
問題と解答:32

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/922-101.html

NO.1 You have installed the Linux Base onto a Commercial Off the Shelf (COTS) server that will be
configured as a Member Server. You are ready to perform the Security Configuration. All LAN connections
are in place and functioning normally.
After connecting through a browser, what is your next step to perform the Security Configuration of this
COTS Member server?
A. Enter the IP address of the Certificate Authority in the address bar of the browser.
B. Enter the IP address of the Primary Security server in the address bar of the browser.
C. Enter the FQDN of the COTS Member server in the address bar of the browser.
D. Enter the FQDN of the Primary Security server in the address bar of the browser.
Answer: C

Nortel   922-101練習問題   922-101   922-101認定資格

NO.2 A customer is deploying a Communication Server 1000 Rls. 6.0 High Availability system and would like
to know what options for Signaling Server functionality exist.
Which options can the customer deploy? (Choose two.)
A. CPPM VxWorks-based Signaling Server
B. CPPM Linux-based Signaling Server
C. COTS VxWorks-based Signaling Server
D. COTS Linux-based Signaling Server
Answer: BD

Nortel   922-101認定証   922-101   922-101

NO.3 A customer is deploying a Communication Server (CS) Rls. 6.0 system. They plan to have a Dell R300
COTS configured as the Primary Security Server and a CPPM configured as a Backup Security Server.
Which statements regarding the roles of the Primary and Backup Security Server are true? (Choose two.)
A. You must have a Backup Security Server for the CS 1000 network.
B. The Backup Security Server is automatically promoted to Primary Security Server.
C. The Primary Security Server cannot be demoted to a member server.
D. The Backup Security Server automatically handles authentication requests when the Primary is down.
Answer: CD

Nortel   922-101   922-101認証試験   922-101認定試験

JapanCertは最新の000-593問題集と高品質の74-338問題と回答を提供します。JapanCertのC2040-951 VCEテストエンジンと700-501試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_TBIT44_731 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/922-101.html

効率が良い問題集を利用してNetwork General 1T6-220認定試験に準備しょう

この情報の時代には、IT業界にとても注目され、この強い情報技術業界にIT人材が得難いです。こうしてNetwork General認定試験がとても重要になります。でも、この試験がとても難しくてIT者になりたい方が障害になっています。

現在の社会の中で優秀な人材が揃てIT人材も多く、競争もとても大きくて、だから多くのIT者はにIT関する試験に参加するIT業界での地位のために奮闘しています。1T6-220試験はNetwork Generalの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。

弊社のNetwork Generalの1T6-220勉強資料を利用したら、きっと試験を受けるための時間とお金を節約できます。JapanCertのNetwork Generalの1T6-220問題集を買う前に、一部の問題と解答を無料にダウンロードすることができます。PDFのバージョンとソフトウェアのバージョンがありますから、ソフトウェアのバージョンを必要としたら、弊社のカスタマーサービススタッフから取得してください。

JapanCertは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。

試験番号:1T6-220問題集
試験科目:Network General 「Switched Ethernet Network Analysis and Troubleshooting」
最近更新時間:2014-03-30
問題と解答:143

他の人の成功を見上げるよりも、自分の成功への努力をしたほうがよいです。JapanCertのNetwork Generalの1T6-220試験トレーニング資料はあなたの成功への第一歩です。この資料を持っていたら、難しいNetwork Generalの1T6-220認定試験に合格することができるようになります。あなたは新しい旅を始めることができ、人生の輝かしい実績を実現することができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/1T6-220.html

NO.1 The Sniffer History Samples reports are especially useful for long term reporting of __________.
A.Slow response time problems
B.Identifying high rates of collisions and CRC errors
C.Combining multiple criteria for baseline reporting
D.All of the above
Answer:D

Network General認定資格   1T6-220   1T6-220認定試験   1T6-220

NO.2 Consider the following description: Only part of a frame has arrived at the adapter when the first part
begins transmission on the media. The adapter quits sending the frame, leaving an incomplete frame
transmitted. This is likely a(n):
A.IRQ setting problem
B.Normal occurrence with any Ethernet adapter
C.TCP timer problem
D.Fast Transmit Adapter issue
Answer:D

Network General   1T6-220   1T6-220認定証   1T6-220   1T6-220

NO.3 When receiving an incoming frame, a station in either half-duplex or full-duplex mode will __________.
A.Check for the maximum frame size of 64 bytes
B.Perform collision detection
C.Truncate the frame after 1518 bytes
D.Validate the FCS
Answer:D

Network General   1T6-220参考書   1T6-220

NO.4 When a network is displaying excessive propagation delay problems, the corruption in the frame is
random, but typically seen before the _______.
A.64th bit
B.64th byte
C.32nd bit
D.32nd byte
Answer:B

Network General   1T6-220認定資格   1T6-220問題集   1T6-220過去問

NO.5 Choose all that apply. Which of the following functions are performed in a Full-duplex Ethernet
environment?
A.Carrier sense before transmitting
B.Maintain an inter-frame gap between frames
C.Perform CRC calculation on transmitted frame
D.Back off and retransmit when a collision occurs
Answer:B C

Network General認定試験   1T6-220   1T6-220   1T6-220認定証

NO.6 The maximum cable distances for Full Duplex Ethernet are ________ compared to Half Duplex
Ethernet:
A.Much higher
B.The same
C.Much lower
D.Slightly higher
Answer:A

Network General問題集   1T6-220   1T6-220認定試験   1T6-220   1T6-220認定試験

NO.7 When a network is displaying _______ problems, the frames are the right size, but have incorrect data
with CRC errors. The Sniffer will show Physical Errors as symptoms or diagnoses.
A.Excessive propagation delay
B.Legal collision
C.Signal reflection
D.Electrical noise
Answer:D

Network General   1T6-220   1T6-220

NO.8 The Gigabit Ethernet Sniffer user interface uses the standard Sniffer interface with enhancements for
Gigabit.
A.True
B.False
Answer:A

Network General   1T6-220認証試験   1T6-220参考書   1T6-220問題集   1T6-220

NO.9 Collisions are always eliminated in __________ environments.
A.Switched Ethernet
B.Full Duplex
C.Gigabit Ethernet
D.All of the above
Answer:B

Network General参考書   1T6-220   1T6-220過去問   1T6-220

NO.10 Legal collisions in Ethernet occur within the first _____ of data.
A.32 bits
B.64 bits
C.256 bits
D.512 bits
Answer:D

Network General認定資格   1T6-220   1T6-220   1T6-220

NO.11 _____ needs to be configured on the switch port you are monitoring or all Detail tab fields will return NA.
A.SNMP
B.RMON
C.MIB
D.802.11b
Answer:B

Network General過去問   1T6-220   1T6-220認証試験   1T6-220   1T6-220認定資格

NO.12 Port mirroring can be set from the Sniffer Portable only if the switch supports it and the switch is
configurable via ______.
A.IOS
B.SPAN
C.SNMP requests
D.802.1
Answer:C

Network General   1T6-220   1T6-220

NO.13 The IEEE 802.3x specification describes the operation of:
A.Fast Ethernet
B.Switched Ethernet
C.Gigabit Ethernet
D.Full Duplex Ethernet
Answer:D

Network General認証試験   1T6-220参考書   1T6-220   1T6-220問題集

NO.14 CSMA/CD stands for:
A.Collision Sense, Multiple Access, Carrier Detection
B.Carrier Sense, Multiple Access, Collision Detection
C.Carrier Sense, Multiplexed Access, Collision Detection
D.Collision Sense, Multiple Access, Collision Detection
Answer:B

Network General問題集   1T6-220認定試験   1T6-220   1T6-220認定証

NO.15 Choose all that apply. The Gigabit Ethernet Sniffer can be configured to store data in the __________
buffer during capture.
A.Adapter Buffer
B.Capture Buffer
C.Jitter Buffer
D.All of the above
Answer:A B

Network General過去問   1T6-220参考書   1T6-220   1T6-220

NO.16 The _______ always has an Ethertype of 8808.
A.PAUSE MAC frame
B.Buffer MAC frame
C.JAM-PAUSE frame
D.STOP MAC frame
Answer:A

Network General   1T6-220   1T6-220参考書   1T6-220過去問

NO.17 A duplex mismatch between a switch port and an end node will typically result in ____________.
A.Total loss of communications
B.Fall back to half-duplex mode
C.Increased broadcast traffic
D.Excessive collisions
Answer:D

Network General問題集   1T6-220練習問題   1T6-220認定資格   1T6-220練習問題

NO.18 Because Gigabit Ethernet can generate up to 125 Mbytes of data per second at full capacity it is
important to __________ when starting to analyze a network problem.
A.Capture data for one minute and then analyze the Expert symptoms
B.Apply a capture filter for a specific station or conversation
C.Capture data directly to disk
D.Increase the Expert thresholds before capturing data
Answer:B

Network General   1T6-220過去問   1T6-220認定資格   1T6-220

NO.19 Ethernet frames that do not end on an 8 bit boundary:
A.Are jabbers
B.Are runt frames
C.Have CRC errors
D.Have alignment errors
Answer:D

Network General認証試験   1T6-220練習問題   1T6-220   1T6-220認定証

NO.20 The Sniffer may identify frames affected by a rogue node or bad port as __________.
A.CRC errors
B.Oversize frames
C.Undersize frames
D.Late collisions
Answer:D

Network General認定試験   1T6-220参考書   1T6-220過去問   1T6-220   1T6-220

JapanCertは最新の70-484問題集と高品質のM70-301問題と回答を提供します。JapanCertの700-101 VCEテストエンジンとIIA-CCSA試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の00M-617 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/1T6-220.html

楽にNetwork Appliance NS0-163認定試験の準備を完了したい?

Network ApplianceのNS0-163の認定試験に合格すれば、就職機会が多くなります。JapanCertはNetwork ApplianceのNS0-163の認定試験の受験生にとっても適合するサイトで、受験生に試験に関する情報を提供するだけでなく、試験の問題と解答をはっきり解説いたします。

どのようにすればもっと楽にNetwork ApplianceのNS0-163認定試験に合格することができるかについて考えたことがありますか。試験に合格する秘密を見つけましたか。それを行う方法がわからない場合、私は教えてあげましょう。実際には、認定試験に合格できる方法が多くあります。試験に関連する知識を一生懸命習得することがただ一つの方法です。今はそのようにしていますか。しかし、これが一番時間を無駄にして、望ましい効果を得られない方法です。それに、毎日仕事で忙しいあなたは、恐らく試験に準備する充分な時間がないでしょう。では、JapanCertのNS0-163問題集を試しましょう。この試験参考書はきっとあなたに思えぬ良い結果を与えられます。

JapanCertが提供した商品の品質が高く、頼られているサイトでございます。購入前にネットで部分な問題集を無料にダウンロードしてあとで弊社の商品を判断してください。JapanCertは君の試験に100%の合格率を保証いたします。迷ってないください。

JapanCertはあなたが完全に信頼できるウェブサイトです。受験生の皆さんをもっと効率的な参考資料を勉強させるように、JapanCertのIT技術者はずっとさまざまなIT認定試験の研究に取り組んでいますから、もっと多くの素晴らしい資料を開発し出します。一度JapanCertのNS0-163問題集を使用すると、きっと二度目を使用したいです。JapanCertは最高のNS0-163資料を提供するだけでなく、高品質のサービスも提供します。私達の資料についてどんなアドバイスがあってもお気軽に言ってください。受験生の皆さんを試験に合格させることを旨とするだけでなく、皆さんに最高のサービスを提供することも目標としています。

JapanCert Network ApplianceのNS0-163試験資料は特別にデザインされたもので、IT領域のエリートが組み立てられた強い団体が受験生の皆様に向いて研究した資料です。認証試験に合格したら、あなたはIT領域で国際的な価値を表すことができます。JapanCertには多くのダンプおよびトレーニング資料のサプライヤーがありますから、あなたが試験に受かることを保証します。JapanCertは事実を通じて話しますから、奇跡が現れるときに我々が言ったすべての言葉を証明できます。

試験番号:NS0-163問題集
試験科目:Network Appliance 「Network Appliance Data Protection Solutions」
最近更新時間:2014-03-30
問題と解答:154

JapanCertが提供したNetwork ApplianceのNS0-163の試験トレーニング資料は受験生の皆さんの評判を得たのはもうずっと前のことになります。それはJapanCertのNetwork ApplianceのNS0-163の試験トレーニング資料は信頼できるもので、確実に受験生を助けて試験に合格するということを証明しました。JapanCertが提供したNetwork ApplianceのNS0-163の試験トレーニング資料はベストセラーになって、ずっとピアの皆をリードしています。JapanCertは消費者の皆さんの許可を得て、評判が良いです。Network ApplianceのNS0-163の認証試験を受けたら、速くJapanCertというサイトをクッリクしてください。あなたがほしいものを得ることができますから、ミスしないだけで後悔しないです。最も専門的な、最も注目を浴びるIT専門家になりたかったら、速くショッピングカートに入れましょう。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/NS0-163.html

NO.1 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD

Network Appliance   NS0-163   NS0-163練習問題

NO.2 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A

Network Appliance認証試験   NS0-163   NS0-163   NS0-163認定試験   NS0-163

NO.3 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D

Network Appliance   NS0-163認定試験   NS0-163認証試験

NO.4 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D

Network Appliance参考書   NS0-163認定証   NS0-163   NS0-163練習問題   NS0-163参考書

NO.5 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D

Network Appliance認証試験   NS0-163過去問   NS0-163

NO.6 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B

Network Appliance   NS0-163過去問   NS0-163

NO.7 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A

Network Appliance   NS0-163   NS0-163

NO.8 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C

Network Appliance   NS0-163   NS0-163   NS0-163   NS0-163問題集   NS0-163

NO.9 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B

Network Appliance   NS0-163   NS0-163

NO.10 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B

Network Appliance   NS0-163参考書   NS0-163   NS0-163

NO.11 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D

Network Appliance認定資格   NS0-163   NS0-163   NS0-163

NO.12 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A

Network Appliance認定証   NS0-163認定資格   NS0-163   NS0-163認証試験   NS0-163参考書

NO.13 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance問題集   NS0-163認定資格   NS0-163   NS0-163参考書   NS0-163認定試験

NO.14 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C

Network Appliance認定試験   NS0-163   NS0-163認証試験   NS0-163認定試験   NS0-163過去問

NO.15 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B

Network Appliance   NS0-163   NS0-163

NO.16 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D

Network Appliance   NS0-163   NS0-163

NO.17 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D

Network Appliance   NS0-163   NS0-163   NS0-163練習問題   NS0-163参考書

NO.18 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B

Network Appliance   NS0-163   NS0-163   NS0-163   NS0-163認定資格   NS0-163

NO.19 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C

Network Appliance参考書   NS0-163   NS0-163練習問題

NO.20 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B

Network Appliance   NS0-163認証試験   NS0-163   NS0-163参考書   NS0-163認定試験

JapanCertは最新の70-481問題集と高品質のC4040-224問題と回答を提供します。JapanCertの70-464 VCEテストエンジンと74-325試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC2020-622 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/NS0-163.html

Network Appliance NS0-155認定試験の受験に対する対策

JapanCertの商品は100%の合格率を保証いたします。JapanCertはITに対応性研究続けて、高品質で低価格な問題集が開発いたしました。JapanCertの商品の最大の特徴は20時間だけ育成課程を通して楽々に合格できます。

JapanCertを利用するのは君の合格率を100%保証いたします。JapanCertは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。

全てのIT専門人員はNetwork ApplianceのNS0-155の認定試験をよく知っていて、その難しい試験に受かることを望んでいます。Network ApplianceのNS0-155の認定試験の認可を取ったら、あなたは望むキャリアを得ることができるようになります。JapanCertのNetwork ApplianceのNS0-155試験トレーニング資料を利用したら、望むことを取得できます。

あなたはこのような人々の一人ですか。さまざまな資料とトレーニング授業を前にして、どれを選ぶか本当に困っているのです。もしそうだったら、これ以上困ることはないです。JapanCertはあなたにとって最も正確な選択ですから。我々はあなたに試験問題と解答に含まれている全面的な試験資料を提供することができます。JapanCertの解答は最も正確な解釈ですから、あなたがより良い知識を身につけることに助けになれます。JapanCertを利用したら、Network ApplianceのNS0-155認定試験に受かることを信じています。それも我々が全てのお客様に対する約束です。

現在の社会で人材があちこちいます。IT領域でも同じです。コンピュータの普及につれて、パソコンを使えない人がほとんどいなくなります。ですから、IT業界で勤めているあなたはプレッシャーを感じていませんか。学歴はどんなに高くてもあなたの実力を代表できません。学歴はただ踏み台だけで、あなたの地位を確保できる礎は実力です。IT職員としているあなたがどうやって自分自身の実力を養うのですか。IT認定試験を受験するのは一つの良い方法です。NS0-155試験を通して、あなたは新しいスキルをマスターすることができるだけでなく、NS0-155認証資格を取得して自分の高い能力を証明することもできます。最近、Network Appliance NS0-155試験の認証資格がとても人気があるようになりましたが、受験したいですか。

多くのIT業界の友達によるとNetwork Appliance認証試験を準備することが多くの時間とエネルギーをかからなければなりません。もし訓練班とオンライン研修などのルートを通じないと試験に合格するのが比較的に難しい、一回に合格率非常に低いです。JapanCertはもっとも頼られるトレーニングツールで、Network ApplianceのNS0-155認定試験の実践テストソフトウェアを提供したり、Network ApplianceのNS0-155認定試験の練習問題と解答もあって、最高で最新なNetwork ApplianceのNS0-155認定試験問題集も一年間に更新いたします。

試験番号:NS0-155問題集
試験科目:Network Appliance 「NetApp Certified 7-Mode Data Administrator」
最近更新時間:2014-03-30
問題と解答:189

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/NS0-155.html

NO.1 Is NetApp storage Encryption supported in Data ONTAP 8.1.1 Cluster-Mode?
A. No, but you can file a PVR to request support.
B. No. it is targeted for a future release of Data ONATP .
C. Yes, only with a special license installed.
D. Yes, it has been supported since 8.0.1.
Answer: D

Network Appliance認定試験   NS0-155問題集   NS0-155認証試験   NS0-155参考書

NO.2 To collect per client NFS statistics on a storage system, the option nfs.per_client_stats.enable
must be set on.
A. True
B. False
Answer: A

Network Appliance   NS0-155   NS0-155

NO.3 There are three phases of Non Disruptive Volume Movement (NDVM). What is the correct
sequence of these phases?
A. Setup Phase, Mirror Phase, Cutover Phase
B. Initialization phase, Copy Phase, Migrate Phase
C. Begin Phase, Move Phase, Complete Phase
D. Setup Phase, Data Copy Phase, Cutover Phase
Answer: D

Network Appliance   NS0-155過去問   NS0-155認定試験   NS0-155参考書

NO.4 You can avoid data corruption when you issue the cf forcetakeover -d command if the remote
node is ________.
A. in a giveback mode
B. fenced off manually
C. powered on and accessible
D. powered off and inaccessible
Answer: D

Network Appliance   NS0-155   NS0-155練習問題   NS0-155   NS0-155   NS0-155参考書

NO.5 When using a Protection Manager policy to manage Open Systems SnapVault backups on a
UNIX
server, which three are valid objects to include in the data set? (Choose three.)
A. A file
B. A qtree
C. A directory
D. Theentire client
Answer: A,C,D

Network Appliance過去問   NS0-155   NS0-155   NS0-155問題集   NS0-155

NO.6 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D

Network Appliance   NS0-155   NS0-155参考書

NO.7 What security mechanism can an administrator use on an OSSV client to set permissions
allowing
backups to a SnapVault secondary system?
A. Via /etc/hosts.equiv file
B. QSM access list modifiable via svconfigurator
C. Contents inside a file called access and located in OSSV /snapvault/etc
D. MD5 based authentication between SnapVault primary and secondary, with changeable
password
Answer: B

Network Appliance認定資格   NS0-155過去問   NS0-155   NS0-155認証試験   NS0-155

NO.8 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B

Network Appliance認定試験   NS0-155認証試験   NS0-155過去問   NS0-155参考書   NS0-155過去問

NO.9 Which three statements are true about SnapLock volumes? (Choose three.)
A. SnapMirror supports SnapLock volumes.
B. There are two types of SnapLock volumes.
C. SnapLock volumes support per-file retention periods.
D. In Data ONTAP 7.2.5.1 and later, SnapLock Compliance volumes are not supported on the VSeries
controller with NetApp Storage.
Answer: A,B,C

Network Appliance   NS0-155認定証   NS0-155   NS0-155練習問題   NS0-155

NO.10 How does the NetApp Remote Agent (RSA) connect to NetApp Support?
A. NetApp Support initiates a non-secure connection to the RSA.
B. NetApp Support initiates a secure connection to the RSA.
C. The RSA initiates a secure connection to NetApp Support.
D. The RSA initiates a non-secure connection to NetApp support.
Answer: C

Network Appliance過去問   NS0-155練習問題   NS0-155   NS0-155認定資格   NS0-155   NS0-155認定資格

JapanCertは最新の642-457問題集と高品質の1Y0-A26問題と回答を提供します。JapanCertのCD0-001 VCEテストエンジンとC-TFIN52-64試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の640-722 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/NS0-155.html

最新なMicrosoftの111-056認定試験の問題集

弊社が提供した問題集がほかのインターネットに比べて問題のカーバ範囲がもっと広くて対応性が強い長所があります。JapanCertが持つべきなIT問題集を提供するサイトでございます。

Microsoftの111-056認定試験に合格するためにたくさん方法があって、非常に少ないの時間とお金を使いのは最高で、JapanCertが対応性の訓練が提供いたします。

あなたはまだ何を待っているのですか。機会が一回だけありますよ。いまMicrosoftの111-056試験問題のフルバージョンを取ることができます。JapanCertというサイトをクッリクしたらあなたの願いを果たせます。あなたが最も良いMicrosoftの111-056試験トレーニング資料を見つけましたから、JapanCertの問題と解答を安心に利用してください。きっと試験に合格しますよ。

Microsoft 111-056認証試験を通ってからかなり人生の新しいマイレージカードがあるようで、仕事に大きく向上してIT業種のすべての方は持ちたいでしょう。多くの人はこんなに良いの認証試験を通ることが難しくて合格率はかなり低いと思っています。ちっとも努力しないと合格することが本当に難しいです。Microsoft 111-056試験を通るのはかなり優れた専門知識が必要です。JapanCertがMicrosoft 111-056認証試験を助けて通るのウエブサイトでございます。JapanCertはMicrosoft 111-056認証試験に向かって問題集を開発しておって、君のいい成績をとることを頑張ります。一目でわかる最新の出題傾向でわかりやすい解説、充実の補充問題などで買うことは一番お得ですよ。

試験番号:111-056問題集
試験科目:Microsoft 「TS:MS.NET Framework 2.0 - Distributed Application Developm」
最近更新時間:2014-03-30
問題と解答:240

JapanCertのMicrosoftの111-056試験問題集を購入したら、あなたは人生の最も重要な試験準備のことを実現できます。あなたは最高のトレーニング資料を手に入れました。JapanCertの製品を買ったら、あなた自身のために成功への扉を開きました。あなたは最も小さな努力で最大の成功を取ることができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/111-056.html

NO.1 You create a .NET Framework remoting application that provides stock information to
customers. The server component raises an event on the client computer when certain conditions
are met. You need to ensure the server raises exactly one event for each client application that is
registered for the event. What should you do?
A. Configure the server class as a Singleton Server Activated Object (SAO) and check for
duplicate client delegate methods before raising the event.
B. Configure the server class as a Client Activated Object (CAO) and override the CreateObjRef
method to check for duplicate client delegate methods before raising the event.
C. Configure the server class as a SingleCall Server Activated Object (SAO) and check for
duplicate client delegate methods before raising the event.
D. Configure the server class as a Client Activated Object (CAO) and check for duplicate client
delegate methods before raising the event.
Answer: A

Microsoft   111-056認定証   111-056   111-056

NO.2 A class library named MathLib contains the following code.public class MathClass :
MarshalByRefObject { public decimal DoHugeCalculation(int iterations) { decimal result;
//Some very lengthy calculations ... return result; }}The MathLib class is hosted in a .NET
Framework remoting server application. A Windows application project running on a client
computer contains the following class.public class MathClient { public void
ProcessHugeCalculation(int iterations)
{ MathClass cm = new MathClass(); decimal decRes = cm.DoHugeCalculation(iterations);
//process the result ... }}The MathClient class must call the MathClass class asynchronously
by using remoting. A callback must be implemented to meet this requirement. You need to
complete the implementation of the MathClient class. What should you do?
A. Modify the MathClient class as follows:public class MathClient {public delegate void
DoHugeCalculationDelegate(decimal result);public event DoHugeCalculationDelegate
DoHugeCalculationResult;public void DoHugeCalculationHandler(decimal result)
{DoHugeCalculationResult(result);} public void ProcessHugeCalculation(int iterations) {
//Hook up event handler here... ... }}
B. Apply the Serializable attribute to the MathClient class.
C. Modify the MathClient class as follows:public class MathClient { private delegate decimal
DoHugeCalculationDelegate(int iterations); private void
DoHugeCalculationCallBack(IAsyncResult res) { AsyncResult aRes = (AsyncResult)res;
decimal decRes = ((DoHugeCalculationDelegate)aRes. AsyncDelegate).EndInvoke(res);
//process the result ... } public void ProcessHugeCalculation(int iterations) { MathClass cm
= new MathClass(); DoHugeCalculationDelegate del = new
DoHugeCalculationDelegate( cm.DoHugeCalculation);
del.BeginInvoke(iterations, new
AsyncCallback( DoHugeCalculationCallBack), null); }}
D. Apply the OneWay attribute to all methods in the MathClass class.
Answer: C

Microsoft   111-056   111-056   111-056

NO.3 You are converting an application to use .NET Framework remoting. The server portion of the
application monitors stock prices and contains a class named StockPriceServer, which is a Server
Activated Object (SAO). The client computer interacts with the server using a common
assembly. When the server attempts to raise an event on the client computer, the server throws
the following exception.System.IO.FileNotFoundException.You discover that the event delegate
is not being called on the client computer. You need to ensure that the server application can
raise the event on the client computer. What should you do?
A. Add the Serializable attribute to the StockPriceServer class and change the event to use one of
the standard common language runtime (CLR) delegates.
B. In the common assembly, add an interface that contains the event and a method to raise the
event. Implement that interface in the StockPriceServer class and use the interface's event to
register the delegate message on the client computer.
C. Add the event delegate to the common assembly. Implement the Add delegate and the
Remove delegate methods of the event in the StockPriceServer class to reference the delegate
method in the client application.
D. Raise the event using the BeginInvoke method and pass a reference to the client computer.
Answer: B

Microsoft   111-056   111-056

JapanCertは最新の050-SEPROGRC-01問題集と高品質のVCP-510問題と回答を提供します。JapanCertのC_TFIN52_64 VCEテストエンジンと700-303試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の3103 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/111-056.html

無料にMicrosoftの70-294の試験問題集をダウンロード する

もし弊社のMicrosoftの70-294認証試験について問題集に興味があったら、購入するまえにインターネットで弊社が提供した無料な部分問題集をダウンロードして、君の試験に役に立つかどうかのを自分が判断してください。それにJapanCertは一年の無料な更新のサービスを提供いたします。

現在の社会の中で優秀なIT人材が揃て、競争も自ずからとても大きくなって、だから多くの方はITに関する試験に参加してIT業界での地位のために奮闘しています。70-294はMicrosoftの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。

JapanCertの70-294問題集はあなたが信じられないほどの的中率を持っています。この問題集は実際試験に出る可能性があるすべての問題を含んでいます。したがって、この問題集をまじめに勉強する限り、試験に合格することが朝飯前のことになることができます。Microsoft試験の重要なの一環として、70-294認定試験はあなたに大きな恩恵を与えることができます。ですから、あなたを楽に試験に合格させる機会を逃してはいけません。JapanCertは試験に失敗した場合は全額返金を約束しますから、70-294試験に合格することができるように、はやくJapanCertのウェブサイトに行ってもっと詳細な情報を読んでください。

JapanCertはIT技術を勉強している人がよく知っているウェブサイトです。このサイトはIT認定試験を受けた受験生から広く好評されました。これはあなたに本当のヘルプを与えるサイトです。では、なぜJapanCertは皆さんの信頼を得ることができますか。それはJapanCertにはIT業界のエリートのグループがあって、グループのIT専門家達がずっと皆さんに最高の70-294資料を提供することに力を尽くしていますから。したがって、JapanCertは優れた参考書を提供して、みなさんのニーズを満たすことができます。

JapanCertについてどのくらい知っているのですか。JapanCertの70-294試験問題集を利用したことがありますか。あるいは、知人からJapanCertを聞いたことがありますか。IT認定試験に関連する参考書のプロな提供者として、JapanCertは間違いなくあなたが今まで見た最高のサイトです。なぜこのように確かめるのですか。それはJapanCertのように最良の70-294試験参考書を提供してあなたに試験に合格させるだけでなく、最高品質のサービスを提供してあなたに100%満足させることもできるサイトがないからです。

JapanCertのMicrosoftの70-294試験トレーニング資料はあなたがリスクフリー購入することを保証します。購入する前に、あなたはJapanCertが提供した無料な一部の問題と解答をダウンロードして使ってみることができます。JapanCertの問題集の高品質とウェブのインタ—フェ—スが優しいことを見せます。それに、我々は一年間の無料更新サービスを提供します。失敗しましたら、当社は全額で返金して、あなたの利益を保障します。JapanCertが提供した資料は実用性が高くて、絶対あなたに向いています。

試験番号:70-294問題集
試験科目:Microsoft 「Planning, Implementing, and Maintaining a Microsoft Windows Server 2003 AD Infrastructure」
最近更新時間:2014-03-30
問題と解答:220

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/70-294.html

NO.1 Your company s Windows Server 2003 environment consists of a single Active Directory directory
service forest. The forest has multiple domains and three sites named Site1, Site2, and Site3. Site1 is the
main office and has four domain controllers. Two of the domain controllers are global catalog servers.
Site2 is a branch office with two domain controllers. Site3 is a branch office with a slow and unreliable
WAN link and two domain controllers.
You need to improve user logon performance for users in Site2 and Site3.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Enable change notification between Site1 and Site2.
B. Enable change notification between Site1 and Site3.
C. Implement universal group membership caching in Site2.
D. Implement universal group membership caching in Site3.
Answer: CD

Microsoft   70-294認定試験   70-294   70-294

NO.2 Your company has a main office and a single branch office. The two offices are connected through a
WAN link. You have Active Directory directory service site objects for each office. Domain controllers are
associated with the appropriate site objects.
Users in the main office are currently authenticated by domain controllers in the branch office.
You need to ensure that users in the main office are authenticated by the domain controllers in the main
office.
What should you do?
A. Clear the Bridge all site links option.
B. Configure a preferred bridgehead server for the site for the main office.
C. Associate the subnets for the main office with the site for the main office.
D. Associate the subnets for the branch office with the site for the branch office.
Answer: C

Microsoft認定資格   70-294   70-294

NO.3 You have a single Active Directory directory service domain. There is a branch office that connects to
the main office through a low-bandwidth WAN link.
The first domain controller is named DC1 and is located in the main office. The branch office has a single
server named Server1. Server1 runs Windows Server 2003.
You are preparing to install Active Directory on Server1. You back up the system state of DC1, and you
send the backup to the administrator at the branch office.
You need to make Server1 an additional domain controller in your domain, while minimizing the
bandwidth usage between the two offices.
What should you do?
A. Restore the system state data from DC1 to an alternate location on Server1. Run the dcpromo
command with the /adv parameter, and select the From these restored backup files option.
B. Restore the system state data from DC1 to the original location on Server1. Run the dcpromo
command with the /adv parameter, and select the From these restored backup files option.
C. Create a new Active Directory site. Create an unattended installation file with the
CriticalReplicationOnly parameter. Run the dcpromo command with the /answer parameter.
D. Create a new Active Directory site. Create an unattended installation file with the SiteName parameter
to place Server1 into the new site. Run the dcpromo command with the /answer parameter.
Answer: A

Microsoft   70-294認定証   70-294練習問題   70-294認定証   70-294

NO.4 Your company has a Windows Server 2003 environment with a single Active Directory directory service
forest. The forest has multiple domains and two sites named Site1 and Site2. Site1 has six domain
controllers. Two of the domain controllers are global catalog servers. Site2 has three domain controllers.
The WAN link between Site1 and Site2 is slow.
You are preparing the environment for an Active Directory application that requires universal group
membership to make authorization decisions. Application servers will be located in Site1 and Site2.
You need to prepare the Active Directory environment for the introduction of the Active Directory
application.
What should you do?
A. Increase the number of domain controllers in Site2 to four.
B. Enable universal group membership caching in Site1.
C. Add additional global catalog servers to Site1.
D. Configure at least one of the domain controllers in Site2 to be a global catalog server.
Answer: D

Microsoft認証試験   70-294   70-294認証試験   70-294

NO.5 Your company has a single Active Directory directory service domain with three domain controllers.
You need to move domain-wide FSMO roles to a different domain controller.
Which tool should you use?
A. Active Directory Domains and Trusts snap-in
B. Active Directory Sites and Services snap-in
C. Active Directory Users and Computers snap-in
D. Active Directory Schema snap-in
Answer: C

Microsoft   70-294   70-294   70-294認定試験

NO.6 Your company has a single Active Directory directory service forest with multiple domains. The
Schema FSMO role is held by one of the domain controllers in the forest root domain. The Domain
Naming Master FSMO role is held by one of the domain controllers in a child domain. All domain
controllers have Windows Server 2003 installed.
You need to upgrade all domain controllers to Windows Server 2003 R2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Run the adprep /forestprep command in the forest root domain.
B. Run the adprep /forestprep command in all the child domains.
C. Run the adprep /domainprep command in all the child domains only.
D. Run the adprep /domainprep command in all domains.
Answer: AD

Microsoft認証試験   70-294   70-294認証試験   70-294過去問

NO.7 Your company has a single Active Directory directory service domain. The company has five Active
Directory sites on the West coast and five Active Directory sites on the East coast. The West coast sites
and the East coast sites are in two separate hub-and-spoke configurations that are separated by a firewall.
All Active Directory replication between the West coast and East coast occurs between a single West
coast domain controller named WestDC1 and a single East coast domain controller named EastDC1.
You need to ensure that if WestDC1 fails, other West coast domain controllers continue to replicate with
each other, but not with East coast domain controllers.
What should you do?
A. Create site links between the West coast hub site and the West coast spoke sites.
B. Create a site link bridge between the West coast hub site and the East coast hub site.
C. Clear the Bridge all site links option and create a site link bridge for all the East coast sites.
D. Clear the Bridge all site links option and create a site link bridge for all the West coast sites.
Answer: D

Microsoft   70-294認定資格   70-294過去問   70-294問題集   70-294参考書   70-294

NO.8 Your company has a single Active Directory directory service forest with four domains. The domains
are named contoso.com, corp.contoso.com, fabrikam.com, and corp.fabrikam.com.
Users in the corp.contoso.com domain frequently access resources that are located in the
corp.fabrikam.com domain.
You need to improve user logon times from the corp.contoso.com domain to the corp.fabrikam.com
domain.
What should you do?
A. Enable universal group caching in sites where corp.contoso.com domain controllers are located.
B. Enable universal group caching in sites where corp.fabrikam.com domain controllers are located.
C. Create a shortcut trust from the corp.fabrikam.com domain to the corp.contoso.com domain.
D. Create a shortcut trust from the corp.contoso.com domain to the corp.fabrikam.com domain.
Answer: C

Microsoft   70-294   70-294   70-294練習問題   70-294   70-294

NO.9 Your company has a single Active Directory directory service forest with three domains.
You plan to modify the Active Directory schema.
You need to identify the schema master for the forest.
What should you do?
A. Run the regsvr32 schmmgmt.dll command. Use the Active Directory Domains and Trusts snap-in.
B. Run the regsvr32 schmmgmt.dll command. Use the Active Directory Users and Computers snap-in.
C. Use the Dsget command-line tool.
D. Use the Dsquery command-line tool.
Answer: D

Microsoft   70-294   70-294   70-294

NO.10 Your Windows Server 2003 environment consists of a single Active Directory directory service forest
with multiple domains. The forest functional level is set to Windows 2000 Server. Your company has a
main office and four branch offices. Each office has two domain controllers. The domain controllers in the
main office are global catalog servers.
In the branch offices, searches for some printers in Active Directory are slow.
You need to improve the performance of Active Directory printer searches in the four branch offices.
What should you do?
A. Enable universal group membership caching in each branch office.
B. Increase the number of domain controllers in each branch office.
C. Add global catalog services to each branch office.
D. Upgrade the forest functional level to Windows Server 2003.
Answer: C

Microsoft認証試験   70-294   70-294認定試験   70-294認定証

NO.11 Your company has a single Active Directory directory service forest with a forest root domain and a
child domain. The company has a main office and several branch offices. You are planning to remove the
child domain.
All of the domain controllers in the forest root domain are located in the main office, and all FSMO roles
are on separate domain controllers. The last domain controller in the child domain is named DC1 and is
located in a branch office.
You attempt to remove Active Directory from DC1, but you receive an error message stating that the
operation could not be completed.
You need to remove Active Directory from DC1.
What should you do?
A. Restore connectivity to the domain controller that holds the Domain Naming Master role.
B. Restore connectivity to the domain controller that holds the Schema Master role.
C. Restore connectivity to the domain controller that holds the Infrastructure Master role.
D. Restore connectivity to the domain controller that holds the PDC Emulator role.
Answer: A

Microsoft   70-294認定試験   70-294問題集   70-294

NO.12 Your company has a single Active Directory directory service forest with a forest root domain and a
child domain.
The company has a high rate of employee turnover, and administrators create several hundred user
accounts per week.
A domain controller in the child domain fails. Within several hours of the failure, administrators are unable
to create new user accounts within the child domain.
You need to ensure that administrators can create user accounts in the child domain.
What should you do?
A. Seize the PDC Emulator role in the child domain.
B. Seize the RID Master role in the child domain.
C. Seize the Infrastructure Master role in the child domain.
D. Create a new domain controller in the child domain, and configure it as a global catalog server.
Answer: B

Microsoft問題集   70-294参考書   70-294認定資格   70-294

NO.13 Your company has a single Active Directory directory service forest with a forest root domain and a
child domain. The child domain is set to the default domain functional level.
You install a second domain controller in the child domain by promoting a server named SVR1.
You need to rename SVR1 to DC2, and you must ensure that there will be no interruption in the ability of
client computers to authenticate to DC2, except during reboot.
What should you do?
A. Raise the domain functional level of the child domain to Windows 2000 native. Use System Properties
on SVR1 to rename SVR1 to DC2.
B. Raise the domain functional level of the child domain to Windows Server 2003. Run the netdom
command to rename SVR1 to DC2.
C. Raise the domain functional level of the child domain to Windows 2000 native. Run the dcpromo
command on SVR1 to remove Active Directory directory service. Use System Properties to rename SVR1
to DC2. Run the dcpromo command to re-install Active Directory.
D. Raise the domain functional level of the child domain to Windows Server 2003. Create a DNS CNAME
record for DC2.contoso.com that points to SVR1.contoso.com.
Answer: B

Microsoft過去問   70-294   70-294認定証   70-294認定証   70-294認証試験

NO.14 Your company has an Active Directory directory service forest with a forest root domain and a child
domain. You have two Active Directory sites named Site1 and Site2. The two sites represent physical
locations that are connected by a WAN link.
All domain controllers are located in Site2. All users log on to the child domain. Several users in Site1 use
computers that run Windows NT 4.0 operating systems.
You configure a new domain controller for each domain, and you place the new domain controllers in
Site1.
You need to ensure that all users in Site1 can change their passwords in the event of a WAN link failure.
What should you do?
A. Transfer the root domain PDC Emulator role to a domain controller in Site1.
B. Transfer the child domain PDC Emulator role to a domain controller in Site1.
C. Transfer the root domain Infrastructure Master role to a domain controller in Site1.
D. Transfer the child domain Infrastructure Master role to a domain controller in Site1.
Answer: B

Microsoft認定試験   70-294   70-294   70-294   70-294過去問

NO.15 You have a single Active Directory directory service domain. You are preparing to create a child
domain. Your user account is in a global security group named Server Administrators. The Server
Administrators group is in the local Administrators group on all servers.
You need to install Active Directory on a server named Server1 to create the new child domain.
What should you do?
A. Have your user account added to the Domain Admins group.
B. Have your user account added to the Schema Admins group.
C. Have your user account added to the Enterprise Admins group.
D. Have your user account added to the Incoming Forest Trust Builders group.
Answer: C

Microsoft問題集   70-294過去問   70-294認定試験   70-294

NO.16 Your company has a single Active Directory directory service forest with multiple domains. The
company has a main office with 1,000 users and a single branch office with 500 users. Each office is a
separate Active Directory site. The main office Active Directory site has two domain controllers with Global
Catalog services.
Company employees must be able to work in both offices.
You need to plan the placement and configuration of domain controllers.
What should you do?
A. Deploy two additional domain controllers in the main office Active Directory site.
B. Deploy global catalog servers in the branch office Active Directory site.
C. Enable change notification on the site link between the main office Active Directory site and the branch
office Active Directory site.
D. Disable change notification on the site link between the main office Active Directory site and the branch
office Active Directory site.
Answer: B

Microsoft   70-294   70-294参考書

NO.17 You have a single Active Directory directory service domain. Your domain controllers are configured as
shown in the following table.
Domain
controller
Site FSMO role or roles
Global catalog
server
DC1 Site1
Schema Master
Domain Naming Master
Yes
DC2 Site2 ? Yes
DC3 Site3 Infrastructure Master Yes
DC4 Site4 PDC Emulator No
File and print services are on servers in Site1. Microsoft Exchange Server is installed on servers in Site2.
The HR and user provisioning applications will be placed on servers in Site3.
You are planning placement of the RID Master FSMO role.
You need to ensure proper functionality of these applications within their sites during an extended WAN
outage.
On which domain controller should you place the RID Master role?
A. DC1
B. DC2
C. DC3
D. DC4
Answer: C

Microsoft参考書   70-294   70-294

NO.18 Your company has a single Active Directory directory service forest named contoso.com. A partner
organization has a forest named fabrikam.com. Both forests are set to the Windows 2000 forest functional
level. Domains named contoso.com and fabrikam.com are set to Windows 2000 Native Mode.
You plan to create a forest trust relationship between contoso.com and fabrikam.com.
You need to be able to configure selective authentication for the trust relationship.
What should you do?
A. Raise the forest functional level on contoso.com and fabrikam.com to Windows Server 2003.
B. Raise the domain functional level on contoso.com and fabrikam.com to Windows Server 2003.
C. Raise the domain functional level and the forest functional level on contoso.com to Windows Server
2003.
D. Raise the domain functional level and the forest functional level on fabrikam.com to Windows Server
2003.
Answer: A

Microsoft認定試験   70-294認定試験   70-294

NO.19 You have a single Active Directory directory service domain. Your company has a main office and
multiple branch offices. Each office has an Active Directory site. The company s network is not fully
routed.
You need to ensure complete replication between the Active Directory sites.
What should you do?
A. Configure site links, and disable site link bridging.
B. Configure site links to use the SMTP transport, and enable site link bridging.
C. Configure a preferred bridgehead server for each branch office site.
D. Configure a preferred bridgehead server for the main office site.
Answer: A

Microsoft   70-294練習問題   70-294   70-294認定資格

NO.20 Your company has a single Active Directory directory service forest named contoso.com. A partner
organization has a forest named fabrikam.com. You create a forest trust relationship between
contoso.com and fabrikam.com.
You need to enable selective authentication between contoso.com and fabrikam.com.
Which tool should you use?
A. Netdom
B. Nltest
C. Dsacls
D. Ntdsutil
Answer: A

Microsoft問題集   70-294参考書   70-294認定試験   70-294

JapanCertは最新のC_TSCM62_65問題集と高品質の70-332問題と回答を提供します。JapanCertの70-331 VCEテストエンジンと00M-622試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の642-385 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/70-294.html

高品質のMicrosoft 70-646「Windows Server 2008, Server Administrator」問題集

JapanCertの70-646 問題集はあなたが70-646認定試験に準備するときに最も欠かせない資料です。この問題集の価値は試験に関連する他の参考書の総合の価値に相当します。このアサーションは過言ではありません。JapanCertの問題集を利用してからこのすべてが真であることがわかります。

Microsoftの70-646認定試験を一回合格するためには必ず良い準備しなければなりません。完全な知識がこの高度専門の試験に合格するのは必要でJapanCertは君にこれらの資源を完全な需要に備わっています。

どのようにすればもっと楽にMicrosoftの70-646認定試験に合格することができるかについて考えたことがありますか。試験に合格する秘密を見つけましたか。それを行う方法がわからない場合、私は教えてあげましょう。実際には、認定試験に合格できる方法が多くあります。試験に関連する知識を一生懸命習得することがただ一つの方法です。今はそのようにしていますか。しかし、これが一番時間を無駄にして、望ましい効果を得られない方法です。それに、毎日仕事で忙しいあなたは、恐らく試験に準備する充分な時間がないでしょう。では、JapanCertの70-646問題集を試しましょう。この試験参考書はきっとあなたに思えぬ良い結果を与えられます。

70-646認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。そうだったら、下記のものを読んでください。いま70-646試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしい70-646試験に関連する参考書が登場しますよ。それはJapanCertの70-646問題集です。気楽に試験に合格したければ、はやく試しに来てください。

試験番号:70-646問題集
試験科目:Microsoft 「Windows Server 2008, Server Administrator」
最近更新時間:2014-03-30
問題と解答:266

JapanCertは Microsoftの70-646認定試験の認証に対して特別な教育ツールで、あなたに多くの時間とお金が使わないようにIT技術にも身につけさせるサイトでございます。JapanCertは専門家チームが自分の知識と経験をを利用してMicrosoftの70-646認証試験の問題集を研究したものでございます。

いつもあなたに最高の70-646認定試験に関連する試験参考書を与えられるために、JapanCertは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、JapanCertはあなたの最もよい選択です。長い間にわたって、JapanCertは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。JapanCertの試験問題集を利用したことがある人がきっといますから。JapanCertは最優秀な試験70-646参考書を提供してあなたを試験に合格させることを保証します。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/70-646.html

NO.1 Your network contains two servers that run the Server Core installation of Windows Server 2008 R2.
The two servers are part of a Network Load Balancing cluster.
The cluster hosts a Web site. Administrators use client computers that run Windows 7.
You need to recommend a strategy that allows the administrators to remotely manage the Network Load
Balancing cluster. Your strategy must support automation.
What should you recommend?
A. On the servers, enable Windows Remote Management (WinRM).
B. On the servers, add the administrators to the Remote Desktop Users group.
C. On the Windows 7 client computers, enable Windows Remote Management (WinRM).
D. On the Windows 7 client computers, add the administrators to the Remote Desktop Users group.
Answer: A

Microsoft   70-646練習問題   70-646問題集

NO.2 Your network consists of a single Active Directory domain. The network is located on the 172.16.0.0/23
subnet.
The company hires temporary employees. You provide user accounts and computers to the temporary
employees. The temporary employees receive computers that are outside the Active Directory domain.
The temporary employees use their computers to connect to the network by using wired connections and
wireless connections.
The company's security policy specifies that the computers connected to the network must have the latest
updates for the operating system.
You need to plan the network's security so that it complies with the company's security policy.
What should you include in your plan?
A. Implement a Network Access Protection (NAP) strategy for the 172.16.0.0/23 subnet.
B. Create an extranet domain within the same forest. Migrate the temporary employees' user accounts to
the extranet domain. Install the necessary domain resources on the 172.16.0.0/23 subnet.
C. Move the temporary employees' user accounts to a new organizational unit (OU). Create a new Group
Policy object (GPO) that uses an intranet Microsoft Update server. Link the new GPO to the new OU.
D. Create a new subnet in a perimeter network. Relocate the wireless access point to the perimeter
network. Require authentication through a VPN server before allowing access to the internal resources.
Answer: A

Microsoft過去問   70-646参考書   70-646   70-646過去問   70-646

NO.3 Testlet: Blue Yonder Airlines
You need to recommend an administrative solution for the local support technicians in the satellite offices.
The solution must meet the company's security requirements.
What should you include in the recommendation?
BYA1 (exhibit):
BYA2 (exhibit):
BYA3 (exhibit):
A. Active Directory delegation
B. Administrator Role Separation
C. managed service accounts
D. Restricted Groups
Answer: B

Microsoft   70-646   70-646

NO.4 Your company has 250 branch offices. Your network contains an Active Directory domain. The domain
controllers run Windows Server 2008 R2. You plan to deploy Readonly Domain Controllers (RODCs) in
the branch offices.
You need to plan the deployment of the RODCs to meet the following requirements:
- Build each RODC at the designated branch office.
- Ensure that the RODC installation source files do not contain cached secrets.
- Minimize the bandwidth used during the initial synchronization of Active Directory Domain Services
(AD?DS).
What should you include in your plan?
A. Use Windows Server Backup to perform a full backup of an existing domain controller. Use the backup
to build the new RODCs.
B. Use Windows Server Backup to perform a custom backup of the critical volumes of an existing domain
controller. Use the backup to build the new RODCs.
C. Create a DFS namespace that contains the Active Directory database from one of the existing domain
controllers. Build the RODCs by using an answer file.
D. Create an RODC installation media. Build the RODCs from the RODC installation media.
Answer: D

Microsoft   70-646参考書   70-646認定資格

NO.5 Your company purchases 15 new 64bit servers as follows:
- Five of the servers have a single processor.
- Five of the servers have a single dual core processor.
- Five of the servers have two quad core processors.
You plan to deploy Windows Server 2008 R2 on the new servers by using Windows Deployment Services
(WDS). You need to recommend a WDS install image strategy that meets the following requirements:
- Minimizes the number of install images
- Supports the deployment of Windows Server 2008 R2
What should you recommend?
A. one install image file that contains three install images
B. one install image file that contains a single install image
C. two install image files that each contain a single install image
D. three install image files that each contain a single install image
Answer: B

Microsoft認定資格   70-646   70-646認証試験   70-646問題集   70-646

NO.6 Your network contains a Webbased application that runs on Windows Server 2003. You plan to migrate
the Webbased application to Windows Server 2008 R2. You need to recommend a server configuration to
support the Webbased application.
The server configuration must meet the following requirements:
- Ensure that the application is available to all users if a single server fails
- Support the installation of .NET applications
- Minimize software costs
What should you recommend?
A. Install the Server Core installation of Windows Server 2008 R2 Standard on two servers.
Configure the servers in a Network Load Balancing cluster.
B. Install the full installation of Windows Server 2008 R2 Web on two servers. Configure the servers in a
Network Load Balancing cluster.
C. Install the full installation of Windows Server 2008 R2 Enterprise on two servers. Configure the servers
in a failover cluster.
D. Install the full installation of Windows Server 2008 R2 Datacenter on two servers. Configure the
servers in a failover cluster.
Answer: B

Microsoft認証試験   70-646   70-646

NO.7 Your network consists of a single Active Directory domain. Your main office has an Internet connection.
Your company plans to open a branch office. The branch office will connect to the main office by using a
WAN link. The WAN link will have limited bandwidth. The branch office will not have access to the Internet.
The branch office will contain 30 Windows Server 2008 R2 servers.
You need to plan the deployment of the servers in the branch office.
The deployment must meet the following requirements:
- Installations must be automated.
- Computers must be automatically activated.
- Network traffic between the offices must be minimized.
What should you include in your plan.?
A. In the branch office, implement Key Management Service (KMS), a DHCP server, and Windows
Deployment Services (WDS).
B. Use Multiple Activation Key (MAK) Independent Activation on the servers. In the main office, implement
a DHCP server and Windows Deployment Services (WDS).
C. In the main office, implement Windows Deployment Services (WDS). In the branch office, implement a
DHCP server and implement the Key Management Service (KMS).
D. Use Multiple Activation Key (MAK) Independent Activation on the servers. In the main office,
implement a DHCP server. In the branch office, implement Windows Deployment Services (WDS).
Answer: A

Microsoft参考書   70-646   70-646   70-646   70-646練習問題

NO.8 Your network consists of a single Active Directory domain. The network contains two Windows Server
2008 R2 computers named Server1 and Server2. The company has two identical print devices. You plan
to deploy print services.
You need to plan a print services infrastructure to meet the following requirements:
- Manage the print queue from a central location.
- Make the print services available, even if one of the print devices fails.
What should you include in your plan?
A. Install and share a printer on Server1. Enable printer pooling.
B. Install the Remote Desktop Services server role on both servers. Configure Remote Desktop
Connection Broker (RD Connection Broker).
C. Install and share a printer on Server1. Install and share a printer on Server2. Use Print Management to
install the printers on the client computers.
D. Add Server1 and Server2 to a Network Load Balancing cluster. Install a printer on each node of the
cluster.
Answer: A

Microsoft   70-646   70-646   70-646   70-646   70-646

NO.9 Your network consists of a single Active Directory domain. The network includes a branch office
named Branch1. Branch1 contains 50 member servers that run Windows Server 2008 R2. An
organizational unit (OU) named Branch1Servers contains the computer objects for the servers in Branch1.
A global group named Branch1admins contains the user accounts for the administrators. Administrators
maintain all member servers in Branch1. You need to recommend a solution that allows the members of
Branch1admins group to perform the following tasks on the Branch1 member servers.
- Stop and start services
- Change registry settings
What should you recommend?
A. Add the Branch1admins group to the Power Users local group on each server in Branch1.
B. Add the Branch1admins group to the Administrators local group on each server in Branch1.
C. Assign the Branch1admins group change permissions to the Branch1Servers OU and to all child
objects.
D. Assign the Branch1admins group Full Control permissions on the Branch1Servers OU and to all child
objects.
Answer: B

Microsoft参考書   70-646   70-646   70-646認定証

NO.10 Your network is configured as shown in the following diagram.
You deploy an enterprise certification authority (CA) on the internal network. You also deploy a Microsoft
Online Responder on the internal network. You need to recommend a secure method for Internet users to
verify the validity of individual certificates.
The solution must minimize network bandwidth.
What should you recommend?
A. Deploy a subordinate CA on the perimeter network.
B. Install a standalone CA and the Network Device Enrollment Service (NDES) on a server on the
perimeter network.
C. Install a Network Policy Server (NPS) on a server on the perimeter network. Redirect authentication
requests to a server on the internal network.
D. Install Microsoft Internet Information Services (IIS) on a server on the perimeter network.
Configure IIS to redirect requests to the Online Responder on the internal network.
Answer: D

Microsoft問題集   70-646   70-646参考書   70-646認証試験

NO.11 Your network contains a single Active Directory site.
You plan to deploy 1,000 new computers that will run Windows 7 Enterprise. The new computers have
Preboot Execution Environment (PXE) network adapters.
You need to plan the deployment of the new computers to meet the following requirements:
- Support 50 simultaneous installations of Windows 7
- Minimize the impact of network operations during the deployment of the new computers
- Minimize the amount of time required to install Windows 7 on the new computers
What should you include in your plan?
A. Deploy the Windows Deployment Services (WDS) server role. Configure the IP Helper tables on all
routers.
B. Deploy the Windows Deployment Services (WDS) server role. Configure each WDS server by using
native mode.
C. Deploy the Windows Deployment Services (WDS) server role and the Transport Server feature.
Configure the Transport Server to use a custom network profile.
D. Deploy the Windows Deployment Services (WDS) server role and the Transport Server feature.
Configure the Transport Server to use a static multicast address range.
Answer: D

Microsoft   70-646認定資格   70-646認定資格   70-646問題集   70-646認定資格

NO.12 Your network consists of a single Active Directory domain. All domain controllers run Windows Server
2008 R2.
You need to implement a Certificate Services solution that meets the following requirements:
- Automates the distribution of certificates for internal users
- Ensures that the network's certificate infrastructure is as secure as possible
- Gives external users access to resources that use certificate based authentication
What should you do?
A. Deploy an online standalone root certification authority (CA). Deploy an offline standalone root CA.
B. Deploy an offline enterprise root certification authority (CA). Deploy an offline enterprise subordinate
CA.
C. Deploy an offline standalone root certification authority (CA). Deploy an online enterprise subordinate
CA. Deploy an online standalone subordinate CA.
D. Deploy an online standalone root certification authority (CA). Deploy an online enterprise subordinate
CA. Deploy an online standalone subordinate CA.
Answer: C

Microsoft   70-646   70-646   70-646

NO.13 Your network contains two DHCP servers. The DHCP servers are named DHCP1 and DHCP2. The
internal network contains 1,000 DHCP client computers that are located on a single subnet. A router
separates the internal network from the Internet. The router has a single IP address on the internal
interface.
DHCP1 has the following scope information:
- Starting IP address: 172.16.0.1
- Ending IP address: 172.16.7.255
- Subnet mask: 255.255.240.0
You need to provide a faulttolerant DHCP infrastructure that supports the client computers on the internal
network. In the event that a DHCP server fails, all client computers must be able to obtain a valid IP
address.
How should you configure DHCP2?
A. Create a scope for the subnet 172.16.0.0/20. Configure the scope to use a starting IP address of
172.16.8.1 and an ending IP address of 172.16.15.254.
B. Create a scope for the subnet 172.16.0.0/21. Configure the scope to use a starting IP address of
172.16.0.1 and an ending IP address of 172.16.15.254.
C. Create a scope for the subnet 172.16.8.0/21. Configure the scope to use a starting IP address of
172.16.8.1 and an ending IP address of 172.16.10.254.
D. Create a scope for the subnet 172.17.0.0/16. Configure the scope to use a starting IP address of
172.17.0.1 and an ending IP address of 172.17.255.254.
Answer: A

Microsoft   70-646   70-646

NO.14 Your network consists of a single Active Directory domain. The network contains five Windows Server
2008 R2 servers that host Web applications. You need to plan a remote management strategy to manage
the Web servers.
Your plan must meet the following requirements:
- Allow Web developers to configure features on the Web sites
- Prevent Web developers from having full administrative rights on the Web servers
What should you include in your plan?
A. Configure request filtering on each Web server.
B. Configure authorization rules for Web developers on each Web server.
C. Configure the security settings in Internet Explorer for all Web developers by using a Group Policy.
D. Add the Web developers to the Account Operators group in the domain.
Answer: B

Microsoft   70-646   70-646

NO.15 Your network consists of a single Active Directory site that includes two network segments. The network
segments connect by using a router that is RFC 1542 compliant.
You plan to use Windows Deployment Services (WDS) to deploy Windows Server 2008 R2 servers. All
new servers support PreBoot Execution Environment (PXE).
You need to design a deployment strategy to meet the following requirements:
- Support Windows Server?2008 R2
- Deploy the servers by using WDS in both network segments
- Minimize the number of servers used to support WDS
What should you include in your design?
A. Deploy one server. Install WDS and DHCP on the server. Configure the IP Helper tables on the router
between the network segments.
B. Deploy two servers. Install WDS and DHCP on both servers. Place one server on each of the network
segments. Configure both servers to support DHCP option 60.
C. Deploy two servers. Install WDS and DHCP on both servers. Place one server on each of the network
segments. Configure both servers to support DHCP option 252.
D. Deploy two servers. Install WDS and DHCP on one server. Install DHCP on the other server.
Place one server on each of the network segments. Configure both servers to support DHCP option 60.
Answer: A

Microsoft   70-646参考書   70-646参考書   70-646   70-646

NO.16 Your company has a main office and two branch offices. The main office is located in London. The
branch offices are located in New York and Paris.
Your network consists of an Active Directory forest that contains three domains named contoso.com,
paris.contoso.com, and newyork.contoso.com. All domain controllers run Windows Server 2008 R2 and
have the DNS Server server role installed.
The domain controllers for contoso.com are located in the London office. The domain controllers for
paris.contoso.com are located in the Paris office. The domain controllers for newyork.contoso.com are
located in the New York office.
A domain controller in the contoso.com domain has a standard primary DNS zone for contoso.com. A
domain controller in the paris.contoso.com domain has a standard primary DNS zone for
paris.contoso.com. A domain controller in the newyork.contoso.com domain has a standard primary DNS
zone for newyork.contoso.com.
You need to plan a name resolution strategy for the Paris office that meets the following requirements:
- If a WAN link fails, clients must be able to resolve hostnames for contoso.com.
- If a WAN link fails, clients must be able to resolve hostnames for newyork.contoso.com.
- The DNS servers in Paris must be updated when new authoritative DNS servers are added to
newyork.contoso.com.
What should you include in your plan?
A. Configure conditional forwarding for contoso.com. Configure conditional forwarding for
newyork.contoso.com.
B. Create a standard secondary zone for contoso.com. Create a standard secondary zone for
newyork.contoso.com.
C. Convert the standard zone into an Active Directoryintegrated zone. Add all DNS servers in the forest to
the root hints list.
D. Create an Active Directoryintegrated stub zone for contoso.com. Create an Active Directoryintegrated
stub zone for newyork.contoso.com.
Answer: B

Microsoft参考書   70-646認定証   70-646認定試験

NO.17 Your company has a main office and a branch office. You plan to deploy a Readonly Domain Controller
(RODC) in the branch office.
You need to plan a strategy to manage the RODC. Your plan must meet the following requirements:
- Allow branch office support technicians to maintain drivers and disks on the RODC
- Prevent branch office support technicians from managing domain user accounts
What should you include in your plan?
A. Configure the RODC for Administrator Role Separation.
B. Configure the RODC to replicate the password for the branch office support technicians.
C. Set NTFS permissions on the Active Directory database to Read & Execute for the branch office
support technicians.
D. Set NTFS permissions on the Active Directory database to Deny Full Control for the branch office
support technicians.
Answer: A

Microsoft   70-646認定証   70-646   70-646

NO.18 Your network consists of a single Active Directory domain. The functional level of the domain is
Windows Server 2008 R2. The domain contains 200 Windows Server 2008 R2 servers.
You need to plan a monitoring solution that meets the following requirements:
- Sends a notification by email to the administrator if an application error occurs on any of the servers
- Uses the minimum amount of administrative effort
What should you include in your plan?
A. On one server, create event subscriptions for each server. On the server, attach tasks to the application
error events.
B. On one server, create an Event Trace Sessions Data Collector Set. On all servers, create a System
Performance Data Collector Set.
C. On all servers, create event subscriptions for one server. On all servers, attach a task for the
application error events.
D. On all servers, create a System Performance Data Collector Set. On one server, configure the report
settings for the new Data Collector set.
Answer: A

Microsoft認定証   70-646問題集   70-646過去問   70-646問題集

NO.19 You need to recommend a Windows Server 2008 R2 server configuration that meets the following
requirements:
- Supports the installation of Microsoft SQL Server 2008
- Provides redundancy for SQL services if a single server fails
What should you recommend?
A. Install a Server Core installation of Windows Server 2008 R2 Enterprise on two servers. Configure the
servers in a failover cluster.
B. Install a full installation of Windows Server 2008 R2 Standard on two servers. Configure Network Load
Balancing on the two servers.
C. Install a full installation of Windows Server 2008 R2 Enterprise on two servers. Configure Network
Load Balancing on the two servers.
D. Install a full installation of Windows Server 2008 R2 Enterprise on two servers. Configure the servers in
a failover cluster.
Answer: D

Microsoft過去問   70-646   70-646問題集   70-646   70-646認証試験   70-646

NO.20 Your network contains an Active Directory forest named contoso.com.
You plan to deploy a new child domain named branch.contoso.com. The child domain will contain two
domain controllers. Both domain controllers will have the DNS Server server role installed. All users and
computers in the branch office will be members of the branch.contoso.com domain.
You need to plan the DNS infrastructure for the child domain to meet the following requirements:
- Ensure resources in the root domain are accessible by fully qualified domain names.
- Ensure resources in the child domain are accessible by fully qualified domain names.
- Provide name resolution services in the event that a single server fails for a prolonged period of time.
- Automatically recognize when new DNS servers are added to or removed from the contoso.com
domain.
What should you include in your plan?
A. On both domain controllers, add a conditional forwarder for contoso.com and create a standard
primary zone for branch.contoso.com.
B. On both domain controllers, modify the root hints to include the domain controllers for contoso.com. On
one domain controller, create an Active Directoryintegrated zone for branch.contoso.com.
C. On one domain controller create an Active Directoryintegrated zone for branch.contoso.com and
create an Active Directoryintegrated stub zone for contoso.com.
D. On one domain controller, create a standard primary zone for contoso.com. On the other domain
controller, create a standard secondary zone for contoso.com.
Answer: C

Microsoft認定証   70-646   70-646   70-646

JapanCertは最新のMB6-871問題集と高品質の70-332問題と回答を提供します。JapanCertの646-206 VCEテストエンジンとLOT-405試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のVCAC510 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/70-646.html