Microsoft MB6-819認定試験を受験したいならこの問題集を推奨

IT認証資料を提供したほかのサイトより、JapanCertのプロかつ高品質の製品は最高のものです。JapanCertを選んだら成功を選んだということです。JapanCertのMicrosoftのMB6-819試験トレーニング資料はあなたが成功への保証です。JapanCertを利用したら、あなたはきっと高い点数を取ることができ、あなたの理想なところへと進むことができます。

JapanCertのMB6-819 問題集はあなたがMB6-819認定試験に準備するときに最も欠かせない資料です。この問題集の価値は試験に関連する他の参考書の総合の価値に相当します。このアサーションは過言ではありません。JapanCertの問題集を利用してからこのすべてが真であることがわかります。

試験番号：MB6-819問題集
試験科目：Microsoft 「AX 2009 Development Introduction」
最近更新時間：2014-01-03
問題と解答：180

MicrosoftのMB6-819認定試験と言ったら、人々は迷っています。異なる考えがありますが、要約は試験が大変難しいことです。MicrosoftのMB6-819認定試験は確かに難しい試験ですが、JapanCert を選んだら、これは大丈夫です。JapanCertのMicrosoftのMB6-819試験トレーニング資料は受験生としてのあなたが欠くことができない資料です。それは受験生のために特別に作成したものですから、１００パーセントの合格率を保証します。信じないになら、JapanCertのサイトをクリックしてください。購入する人々が大変多いですから、あなたもミスしないで速くショッピングカートに入れましょう。

Microsoft MB6-819認証試験に合格することが簡単ではなくて、Microsoft MB6-819証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。

MicrosoftのMB6-819の認証試験は現在IT業界でもっとも人気があって、その試験に合格すれば君の生活と仕事にいいです。 JapanCertはMicrosoftのMB6-819の認証試験の合格率を高めるのウエブサイトで、JapanCert中のIT業界の専門家が研究を通じてMicrosoftのMB6-819の認証試験について問題集を研究し続けています。100%合格率は彼らの研究成果でございます。JapanCertを選られば、成功しましょう。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/MB6-819.html

NO.1 You work in an International company which is called DONEX. And you're in charge of the
network of your company. How can you make sure that code in the Clicked method of a button on
a form is run on the server?
A.Set the Server property on the button to Yes
B.Set the RunOn property on the button to Server
C.Set the RunOn property on the menu item to Server
D.You cannot run code in the Clicked method on the server
Correct:D

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.2 You work in an International company which is called DONEX. And you're in charge of the
network of your company. In the following options, which statement is TRUE about report
templates?
A.A report with an auto design specification cannot use a template.
B.A report with a custom design specification cannot use a template.
C.Only reports based on an auto design specification inherit changes that are made to a report template.
D.Only reports based on a custom design specification inherit changes that are made to a report template.
Correct:C

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.3 You work in an International company which is called DONEX. And you're in charge of the
network of your company. In the following options, which of the following are not best practice
considerations?
A.The sort order of the data sent to the report.
B.Using AutoDesignSpecs instead of Generated Design.
C.What font and size the user has set up as report defaults.
D.The length of the fields and extended data types at the user's installation.
Correct:B

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.4 You work in an International company which is called DONEX. And you're in charge of the
network of your company. Now one of your colleagues asks for your help. He has no idea about
what the standard ArrayLength value of a new extended data type is. So what's your answer?
A.1
B.2
C.3
D.4
Correct:A

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.5 You work in an International company which is called DONEX. And you're in charge of the
network of your company. Given x = 2, what will the following method return?public int
exampleMethod(int x) { switch (x) { case (1): x = x + x; break; case (2): x = x + x;case (3): x = x + x;
case (4): x = x + x; break; case (5): x = x + x; break; default: x = x * 4; } return x; }
A.2
B.4
C.8
D.16
Correct:D

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.6 You work in an International company which is called DONEX. And you're in charge of the
network of your company. If you see on certain forms in the user interface is text such as
'@ABC160', what could not be the cause of this?
A.The label files did not get deployed.
B.The Microsoft Dynamics AX database needs re-indexing.
C.The label file does not exist for the current language
D.A new label file was added but the corresponding .ali file was not deleted
Correct:B

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.7 You work in an International company which is called DONEX. And you're in charge of the
network of your company. Now one of your colleagues asks for your help. He has no idea about
what types of templates are available in the Microsoft Dynamics AX report designer. So what's
your answer?
A.Only report templates.
B.Report and Section templates.
C.Report, Section and ProgrammableSection templates.
D.Report, Section, ProgrammableSection and Body templates.
Correct:B

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.8 You work in an International company which is called DONEX. And you're in charge of the
network of your company. And now you work as the systems developer. You have been assigned
a task to add a new filter on the delivery date to a query. The query is used to filter which orders
are to be updated during the periodic Packing Slipupdate process. Which node on the query do
you need to add the field to?
A.Ranges
B.Filter
C.Sorting
D.Data Sources
Correct:A

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.9 You work in an International company which is called DONEX. And you're in charge of the
network of your company. Now one of your colleagues asks for your help. He has no idea about
what the best practice for naming variables is. So what's your answer? (choose more than one)
A.One letter variable names can only be used for looping and co-ordinates
B.Variables should start with a lower case letter, for example custAccount
C.When using two variables of the same type, use a sequential number, for example date1, date2
D.Variables should start with a letter signifying the base type followed by an underscore (_), for example
str s_name;
Correct:A B

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.10 You work in an International company which is called DONEX. And you're in charge of the
network of your company. How can the StringSize property of a new extended data type, which is
inherited from custAccount, be changed?
A.By changing the StringSize on custAccount.
B.By changing the StringSize on the new extended data type.
C.The StringSize of extended data types CANNOT be changed.
D.By changing the StringSize on the top-level parent of the custAccount.
Correct:D

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.11 You work in an International company which is called DONEX. And you're in charge of the
network of your company. Now one of your colleagues asks for your help. He has no idea about
how memory is controlled by Microsoft Dynamics AX. So what's your answer?
A.The memory model is defined on the user options
B.The memory model is defined on the AOS configuration
C.Memory is controlled by explicit programmer defined pointers
D.Memory is controlled only by the kernel and developers and users cannot configure the memory model
Correct:D

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.12 You work in an International company which is called DONEX. And you're in charge of the
network of your company. And now you work as the systems developer. You have received an
xpo-file containing modified application objects. Before you click the button to import into
Microsoft Dynamics AX, what tool should you choose to use?
A.Compare
B.Code Explorer
C.Application objects
D.Application Hierarchy Tree
Correct:A

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.13 You work in an International company which is called DONEX. And you're in charge of the
network of your company. In the following options, which would be consideredreporting best
practices? (choose more than one)
A.Considering the size of amount fields in the user's data.
B.Considering the printer that will be used for the report.
C.Considering the length of labels that may be rendered in different languages.
D.Considering the number of financial dimensions used at the user's installation.
Correct:A C D

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.14 You work in an International company which is called DONEX. And you're in charge of the
network of your company. Now one of your colleagues asks for your help. He has no idea about
IntelliMorph. So what's your answer?
A.IntelliMorph is the tool you use to create a new label file.
B.IntelliMoprh is the automatic layout generation of Forms, Reports and Menus.
C.IntelliMorph is the Integrated Development Environment in Microsoft Dynamics AX.
D.IntelliMorph is used when data from more than one table needs to be shown on a form or a report.
Correct:B

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.15 You work in an International company which is called DONEX. And you're in charge of the
network of your company. And now you work as the systems developer. You have been assigned
a task to investigate a problem with a field on a form. The field is an Enum, with five possible
selections. Some of the records in the form show the value as blank, whereas some show the
correct text. All values of the Enum are seen on at least one record. What might cause this?
A.No label has been specified on one or more of the elements
B.The data source on the form control has not been specified
C.The values in the enum have been modified and records exist with old values
D.The Enum on the field is set correctly, but the extended data type on the field has not been set.
Correct:C

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.16 You work in an International company which is called DONEX. And you're in charge of the
network of your company. And now you work as the systems developer. You have been assigned
a task to document your code by adding XML comments. So what is the correct syntax for you to
use for you?
A./* */
D.//
E.// Comment
F.//
G.//
J.///
K./// Comment
L.///
Correct:D

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.17 You work in an International company which is called DONEX. And you're in charge of the
network of your company. And now you work as the systems developer. You have been assigned
a task to add online help to a new form you have created. So what should you do to achieve this?
A.You should create a .chm file using a third party product, override the Help method on the form design,
returning the help file name and topic id.
B.You should expand the Application Documention > Forms node in the AOT, find the node for the form ,
right-click and select Edit. Add the help text to the Help
C.editing form
D.You should create a .chm file using a third party product, add the file to the AOT Help Files node, set
the help file and help file topic properties on the form
E.design
F.You should create a .chm file using a third party product, add the file to the AOT Help Files node.
Expand the Application Documention > Forms node in the AOT,
G.Set the help file and help topics propeties.
Correct:C

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.18 You work in an International company which is called DONEX. And you're in charge of the
network of your company. In the following options, which object types is the datasource for a
report?
A.View
B.Class
C.Table
D.Query
Correct:D

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.19 You work in an International company which is called DONEX. And you're in charge of the
network of your company. And now you work as the systems developer. You have been assigned
a task to create a new table for a company to hold customer's favorite items. What should the
table name be?
A.FABCustFavorite
B.FavouriteItemCust
C.ItemCustFavourite
D.CustInventFavorite
Correct:D

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

NO.20 You work in an International company which is called DONEX. And you're in charge of the
network of your company. How can you get a graphical view of Data or Class models?
A.Drag the Tables or Classes into the Model Designer.
B.Right-click the Table and select "Print Data Model" or right-click the Class and select "Print Class
Model".
C.Create a project including the specific Tables or Classes, then right-click the project node and select
"Print Model".
D.Create a project including the specific Tables or Classes, then right-click the project node and select
Add-Ins > Reverse Engineer.
Correct:D

Microsoft   MB6-819認定証   MB6-819   MB6-819   MB6-819認定資格

JapanCertは最新の000-N34問題集と高品質のLOT-442問題と回答を提供します。JapanCertのMB6-871 VCEテストエンジンと70-464試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の74-325 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク：http://www.japancert.com/MB6-819.html

最高のMicrosoftのMB2-634 70-671 MB6-819 MB6-817 70-562試験対策材料を無料でダウンロード

JapanCertは専門的に IT認証試験に関する資料を提供するサイトで、１００パーセントの合格率を保証できます。それもほとんどの受験生はJapanCertを選んだ理由です。JapanCertはいつまでも受験生のニーズに注目していて、できるだけ皆様のニーズを満たします。 JapanCertのMicrosoftのMB2-634 70-671 MB6-819 MB6-817 70-562試験トレーニング資料は今までがないIT認証のトレーニング資料ですから、JapanCertを利用したら、あなたのキャリアは順調に進むことができるようになります。

JapanCertのMicrosoftのMB2-634 70-671 MB6-819 MB6-817 70-562試験トレーニング資料は現在で一番人気があるダウンロードのフォーマットを提供します。PDFとソフトのフォーマットで、ダウンロードするのは易いです。JapanCertが提供した製品がIT専門家は実際の経験を活かして作った最も良い製品で、あなたが自分の目標を達成するようにずっと一生懸命頑張っています。

JapanCertのMicrosoftのMB2-634 70-671 MB6-819 MB6-817 70-562試験問題集を購入したら、あなたは人生の最も重要な試験準備のことを実現できます。あなたは最高のトレーニング資料を手に入れました。JapanCertの製品を買ったら、あなた自身のために成功への扉を開きました。あなたは最も小さな努力で最大の成功を取ることができます。

試験番号：MB2-634問題集

試験科目：Microsoft 「CRM 4.0 Extending Microsft Dynamics」

問題と解答：全82問

試験番号：70-671問題集

試験科目：Microsoft 「Design and Providing MS Vol Licensing Solutions to Small and Med」

問題と解答：全130問

試験番号：MB6-819問題集

試験科目：Microsoft 「AX 2009 Development Introduction」

問題と解答：全180問

試験番号：MB6-817問題集

試験科目：Microsoft 「AX 2009 Trade and Logistics」

問題と解答：全170問

試験番号：70-562問題集

試験科目：Microsoft 「TS: Microsoft .NET Framework 3.5, ASP.NET Application Development」

問題と解答：全133問

JapanCertが提供した問題集を使用してIT業界の頂点の第一歩としてとても重要な地位になります。君の夢は1歩更に近くなります。資料を提供するだけでなく、MicrosoftのMB2-634 70-671 MB6-819 MB6-817 70-562試験も一年の無料アップデートになっています。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/70-562.html

NO.1 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. You
create a Web page that contains the following two XML fragments. (Line numbers are included for
reference only.)
01 <script runat="server">
02
03 </script>
04 <asp:ListView ID="ListView1" runat="server"
05 DataSourceID="SqlDataSource1"
06
07 >
08 <ItemTemplate>
09 <td>
10 <asp:Label ID="LineTotalLabel" runat="server" Text='<%# Eval("LineTotal") %>' />
11 </td>
12 </ItemTemplate>
The SqlDataSource1 object retrieves the data from a Microsoft SQL Server 2005 database table. The
database table has a column named LineTotal.
You need to ensure that when the size of the LineTotal column value is greater than seven characters, the
column is displayed in red color.
What should you do?
A. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotalLabel");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
B. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotal");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
C. Insert the following code segment at line 06.
OnDataBinding="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotal";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
D. Insert the following code segment at line 06.
OnDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotalLabel";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
Answer: A

Microsoft参考書   70-562   70-562

NO.2 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code segment to create a class named MultimediaDownloader that implements
the IHttpHandler interface.
namespace Contoso.Web.UI {
public class MultimediaDownloader : IHttpHandler {
...
}
}
The MultimediaDownloader class performs the following tasks:
It returns the content of the multimedia files from the Web server
It processes requests for the files that have the .media file extension
The .media file extension is mapped to the aspnet_isapi.dll file in Microsoft IIS 6.0.
You need to configure the MultimediaDownloader class in the Web.config file of the application.
Which code fragment should you use?
A. <httpHandlers>
<add verb="*.media" path="*" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
B. <httpHandlers>
<add verb="HEAD" path="*.media" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
C. <httpHandlers>
<add verb="*" path="*.media" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
D. <httpHandlers>
<add verb="GET,POST" path="*" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
Answer: C

Microsoft認定試験   70-562   70-562

NO.3 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application has a mobile Web form that contains the following ObjectList control.
<mobile:ObjectList ID="ObjectListCtrl" OnItemCommand="ObjectListCtrl_ItemCommand"
Runat="server">
<Command Name="CmdDisplayDetails" Text="Details" />
<Command Name="CmdRemove" Text="Remove" />
</mobile:ObjectList>
You create an event handler named ObjectListCtrl_ItemCommand.
You need to ensure that the ObjectListCtrl_ItemCommand handler detects the selection of the
CmdDisplayDetails item.
Which code segment should you write?
A. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandName == "CmdDisplayDetails") {
}
}
B. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandArgument.ToString() == "CmdDisplayDetails") {
}
}
C. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = sender as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
D. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = e.CommandSource as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
Answer: A

Microsoft参考書   70-562練習問題   70-562   70-562

NO.4 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named Default.aspx in the root of the application. You add an
ImageResources.resx resource file in the App_GlobalResources folder. The ImageResources.resx file
contains a localized resource named LogoImageUrl.
You need to retrieve the value of LogoImageUrl.
Which code segment should you use?
A. string logoImageUrl = (string)GetLocalResourceObject("LogoImageUrl");
B. string logoImageUrl = (string)GetGlobalResourceObject("Default", "LogoImageUrl");
C. string logoImageUrl = (string)GetGlobalResourceObject("ImageResources", "LogoImageUrl");
D. string logoImageUrl = (string)GetLocalResourceObject("ImageResources.LogoImageUrl");
Answer: C

Microsoft   70-562   70-562   70-562   70-562

NO.5 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
When you review the application performance counters, you discover that there is an unexpected
increase in the value of the Application Restarts counter.
You need to identify the reasons for this increase.
What are three possible reasons that could cause this increase? (Each correct answer presents a
complete solution. Choose three.)
A. Restart of the Microsoft IIS 6.0 host.
B. Restart of the Microsoft Windows Server 2003 that hosts the Web application.
C. Addition of a new assembly in the Bin directory of the application.
D. Addition of a code segment that requires recompilation to the ASP.NET Web application.
E. Enabling of HTTP compression in the Microsoft IIS 6.0 manager for the application.
F. Modification to the Web.config file in the system.web section for debugging the application.
Answer: CDF

Microsoft   70-562   70-562   70-562認定資格   70-562認定証   70-562

NO.6 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The application contains the following device filter element in the Web.config file.
<filter name="isHtml" compare="PreferredRenderingType"argument="html32" />
The application contains a Web page that has the following image control. (Line numbers are included for
reference only.)
01 <mobile:Image ID="imgCtrl" Runat="server">
03 </mobile:Image>
You need to ensure that the following conditions are met:
The imgCtrl Image control displays he highRes.jpg file if the Web browser supports html.
The imgCtrl Image control displays lowRes.gif if the Web browser does not support html
Which DeviceSpecific element should you insert at line 02?
A. <DeviceSpecific>
<Choice Filter="isHtml" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
B. <DeviceSpecific>
<Choice Filter="isHtml" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="isHtml" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
C. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
D. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="PreferredRenderingType" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
Answer: A

Microsoft   70-562認証試験   70-562過去問

NO.7 You create a Microsoft ASP.NET application by using the Microsoft .NET
Framework version 3.5.
You add a TextBox control named TextBox1.
You write the following code segment for validation.
protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args) {
DateTime dt = String.IsNullOrEmpty(args.Value) ? DateTime.Now :
Convert.ToDateTime(args.Value);
args.IsValid = (DateTime.Now - dt).Days < 10;
}
You need to validate the value of TextBox1.
Which code fragment should you add to the Web page?
A. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
EnableClientScript="false" InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
B. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" ValueToCompare="<%= DateTime.Now; %>">
</asp:CompareValidator>
C. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
D. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" Operator="DataTypeCheck" >
</asp:CompareValidator>
Answer: B

Microsoft   70-562過去問   70-562認定資格   70-562認定証   70-562過去問   70-562認定資格

NO.8 You modify an existing Microsoft ASP.NET application by using the Microsoft .NET Framework version
3.5.
You add a theme to the ASP.NET application.
You need to apply the theme to override any settings of individual controls.
What should you do?
A. In the Web.config file of the application, set the Theme attribute of the pages element to the name of
the theme.
B. In the Web.config file of the application, set the StyleSheetTheme attribute of the pages element to the
name of the theme.
C. Add a master page to the application. In the @Master directive, set the Theme attribute to the name of
the theme.
D. Add a master page to the application. In the @Master directive, set the StyleSheetTheme attribute to
the name of the theme.
Answer: A

Microsoft   70-562   70-562

NO.9 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create the following controls:
A composite custom control named MyControl.
A templated custom control named OrderFormData.
You write the following code segment to override the method named CreateChildControls() in the
MyControl class. (Line numbers are included for reference only.)
01 protected override void CreateChildControls() {
02 Controls.Clear();
03 OrderFormData oFData = new OrderFormData("OrderForm");
04
05 }
You need to add the OrderFormData control to the MyControl control.
Which code segment should you insert at line 04?
A. Controls.Add(oFData);
B. Template.InstantiateIn(this);
Template.InstantiateIn(oFData);
C. Controls.Add(oFData);
this.Controls.Add(oFData);
D. this.TemplateControl = (TemplateControl)Template;
oFData.TemplateControl = (TemplateControl)Template;
Controls.Add(oFData);
Answer: B

Microsoft参考書   70-562   70-562問題集

NO.10 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application has a Web form file named MovieReviews.aspx.
The MovieReviews.aspx file connects to a LinqDataSource DataSource named LinqDataSource1 that
has a primary key named MovieID.
The application has a DetailsView control named DetailsView1.
The MovieReviews.aspx file contains the following code fragment. (Line numbers are included for
reference only.)
01 <asp:DetailsView ID="DetailsView1" runat="server" DataSourceID="LinqDataSource1"
02
03 />
04 <Fields>
05 <asp:BoundField DataField="MovieID" HeaderText="MovieID" InsertVisible="False"
ReadOnly="True" SortExpression="MovieID" />
06 <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" />
07 <asp:BoundField DataField="Theater" HeaderText="Theater" SortExpression="Theater" />
08 <asp:CommandField ShowDeleteButton="false" ShowEditButton="True"
ShowInsertButton="True" />
09 </Fields>
10 </asp:DetailsView>
You need to ensure that the users can insert and update content in the DetailsView1 control.
You also need to prevent duplication of the link button controls for the Edit and New operations.
Which code segment should you insert at line 02?
A. AllowPaging="false"
AutoGenerateRows="false"
B. AllowPaging="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
C. AllowPaging="true"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
D. AllowPaging="false"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
Answer: B

Microsoft   70-562認定証   70-562認定資格   70-562   70-562   70-562認定試験

NO.11 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application runs on Microsoft IIS 6.0.
You create a page named oldPage.aspx.
You need to ensure that the following requirements are met when a user attempts to access the page:
The browser diplays the URL of the oldPage.aspx page.
The browser displays the page named newPage.aspx
Which code segment should you use?
A. Server.Transfer("newPage.aspx");
B. Response.Redirect("newPage.aspx");
C. if (Request.Url.UserEscaped) {
Server.TransferRequest("newPage.aspx");
}
else {
Response.Redirect("newPage.aspx", true);
}
D. if (Request.Url.UserEscaped) {
Response.RedirectLocation = "oldPage.aspx";
Response.Redirect("newPage.aspx", true);
}
else {
Response.Redirect("newPage.aspx");
}
Answer: A

Microsoft認定資格   70-562   70-562   70-562認定資格

NO.12 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create two user controls named UserCtrlA.ascx and UserCtrlB.ascx. The user controls postback to
the server.
You create a new Web page that has the following ASPX code.
<asp:CheckBox ID="Chk" runat="server" oncheckedchanged="Chk_CheckedChanged"
AutoPostBack="true" />
<asp:PlaceHolder ID="PlHolder" runat="server"></asp:PlaceHolder>
To dynamically create the user controls, you write the following code segment for the Web page.
public void LoadControls() {
if (ViewState["CtrlA"] != null) {
Control c;
if ((bool)ViewState["CtrlA"] == true) {
c = LoadControl("UserCtrlA.ascx"); }
else {
c = LoadControl("UserCtrlB.ascx");
}
ID = "Ctrl";
PlHolder.Controls.Add(c);
}
}
protected void Chk_CheckedChanged(object sender, EventArgs e) {
ViewState["CtrlA"] = Chk.Checked;
PlHolder.Controls.Clear();
LoadControls();
}
You need to ensure that the user control that is displayed meets the following requirements:
It is recreated during postback
It retains its state.
Which method should you add to the Web page?
A. protected override object SaveViewState()
{
LoadControls();
return base.SaveViewState();
}
B. protected override void Render(HtmlTextWriter writer) {
LoadControls();
base.Render(writer);
}
C. protected override void OnLoadComplete(EventArgs e) {
base.OnLoadComplete(e);
LoadControls();
}
D. protected override void LoadViewState(object savedState) {
base.LoadViewState(savedState);
LoadControls();
}
Answer: D

Microsoft問題集   70-562   70-562認定試験

NO.13 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment. (Line numbers are included for reference only.)
01 <asp:RequiredFieldValidator
02 ID="rfValidator1" runat="server"
03 Display="Dynamic" ControlToValidate="TextBox1"
04
05 >
06
07 </asp:RequiredFieldValidator>
08
09 <asp:ValidationSummary DisplayMode="List"
10 ID="ValidationSummary1" runat="server" />
You need to ensure that the error message displayed in the validation control is also displayed in the
validation summary list.
What should you do.?
A. Add the following code segment to line 06.
Required text in TextBox1
B. Add the following code segment to line 04.
Text="Required text in TextBox1"
C. Add the following code segment to line 04.
ErrorMessage="Required text in TextBox1"
D. Add the following code segment to line 04.
Text="Required text in TextBox1" ErrorMessage="ValidationSummary1"
Answer: C

Microsoft   70-562   70-562   70-562

NO.14 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named enterName.aspx. The Web page contains a TextBox control named
txtName. The Web page cross posts to a page named displayName.aspx that contains a Label control
named lblName.
You need to ensure that the lblName Label control displays the text that was entered in the txtName
TextBox control.
Which code segment should you use?
A. lblName.Text = Request.QueryString["txtName"];
B. TextBox txtName = FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
C. TextBox txtName = Parent.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
D. TextBox txtName = PreviousPage.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
Answer: D

Microsoft問題集   70-562認証試験   70-562   70-562

NO.15 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The Web site uses C# as the programming language. You plan to add a code file written in Microsoft
VB.NET to the application. This code segment will not be converted to C#.
You add the following code fragment to the Web.config file of the application.
<compilation debug="false">
<codeSubDirectories>
<add directoryName="VBCode"/>
</codeSubDirectories>
</compilation>
You need to ensure that the following requirements are met:
The existing VB.NET file can be used in the Web application
The file can be modified and compiled at run time
What should you do?
A. Create a new class library that uses VB.NET as the programming language.
Add the VB.NET code file to the class library. Add a reference to the class library in the application.
B. Create a new folder named VBCode at the root of the application. Place the VB.NET code file in this
new folder.
C. Create a new Microsoft Windows Communication Foundation (WCF) service project that uses VB.NET
as the programming language. Expose the VB.NET code functionality through the WCF service. Add a
service reference to the WCF service project in the application.
D. Create a new folder named VBCode inside the App_Code folder of the application. Place the VB.NET
code file in this new folder.
Answer: D

Microsoft過去問   70-562参考書   70-562認定資格   70-562   70-562

NO.16 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add the following code fragment to the Web.config file of the application (Line numbers are
includedfor reference only).
01 <healthMonitoring>
02 <providers>
03 <add name="EventLogProvider"
type="System.Web.Management.EventLogWebEventProvider />
04 <add name="WmiWebEventProvider"
type="System.Web.Management.WmiWebEventProvider />
05 </providers>
06 <eventMappings>
07
08 </eventMappings>
09 <rules>
10 <add name="Security Rule" eventName="Security Event" provider="WmiWebEventProvider"
/>
11 <add name="AppError Rule" eventName="AppError Event" provider="EventLogProvider" />
12 </rules>
13 </healthMonitoring>
You need to configure Web Events to meet the following requirements:
Security-related Web Events are mapped to Microsoft Windows Management Instrumentation (WMI)
events.
Web Events caused by problems with configuration or application code are logged into the Windows
Application Event Log.
Which code fragment should you insert at line 07?
A. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
B. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
C. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
D. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
Answer: B

Microsoft   70-562認定試験   70-562認定証   70-562認定試験   70-562認定証

NO.17 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a custom Web user control named SharedControl. The control will be compiled as a library.
You write the following code segment for the SharedControl control. (Line numbers are included for
reference only.)
01 protected override void OnInit(EventArgs e)
02 {
03 base.OnInit(e);
04
05 }
All the master pages in the ASP.NET application contain the following directive.
<%@ Master Language="C#" EnableViewState="false" %>
You need to ensure that the state of the SharedControl control can persist on the pages that reference a
master page.
Which code segment should you insert at line 04?
A. Page.RegisterRequiresPostBack(this);
B. Page.RegisterRequiresControlState(this);
C. Page.UnregisterRequiresControlState(this);
D. Page.RegisterStartupScript("SharedControl","server");
Answer: B

Microsoft過去問   70-562練習問題   70-562

NO.18 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application must redirect the original URL to a different ASPX page.
You need to ensure that the users cannot view the original URL after the page is executed.
You also need to ensure that each page execution requires only one request from the client browser.
What should you do?
A. Use the Server.Transfer method to transfer execution to the correct ASPX page.
B. Use the Response.Redirect method to transfer execution to the correct ASPX page.
C. Use the HttpContext.Current.RewritePath method to transfer execution to the correct ASPX page.
D. Add the Location: new URL value to the Response.Headers collection. Call the Response.End()
statement. Send the header to the client computer to transfer execution to the correct ASPX page.
Answer: C

Microsoft   70-562   70-562   70-562

NO.19 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add an XmlDataSource control named XmlDataSource1 to the Web page. XmlDataSource1 is bound
to an XML document with the following structure.
<?xml version="1.0" encoding="utf-8" ?>
<clients>
<client ID="1" Name="John Evans" />
<client ID="2" Name="Mike Miller"/>
...
</clients>
You also write the following code segment in the code-behind file of the Web page.
protected void BulletedList1_Click(object sender, BulletedListEventArgs e) {
//...
}
You need to add a BulletedList control named BulletedList1 to the Web page that is bound to
XmlDataSource1.
Which code fragment should you use?
A. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSource="XmlDataSource1"
DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
B. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="Name" DataMember="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
C. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSourceID="XmlDataSource1" DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
D. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="ID" DataValueField="Name"
onclick="BulletedList1_Click">
</asp:BulletedList>
Answer: C

Microsoft参考書   70-562認定試験   70-562

NO.20 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment.
<asp:DropDownList AutoPostBack="true" ID="DropDownList1" runat="server"
onselectedindexchanged="DropDownList1_SelectedIndexChanged">
<asp:ListItem>1</asp:ListItem>
<asp:ListItem>2</asp:ListItem>
<asp:ListItem>3</asp:ListItem>
</asp:DropDownList>
You also add a MultiView control named MultiView1 to the Web page. MultiView1 has three child View
controls.
You need to ensure that you can select the View controls by using the DropDownList1 DropDownList
control.
Which code segment should you use?
A. int idx = DropDownList1.SelectedIndex;
MultiView1.ActiveViewIndex = idx;
B. int idx = DropDownList1.SelectedIndex;
MultiView1.Views[idx].Visible = true;
C. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.ActiveViewIndex = idx;
D. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.Views[idx].Visible = true;
Answer: A

Microsoft   70-562   70-562過去問   70-562   70-562過去問