JapanCert を選択して１００％の合格率を確保することができて、もし試験に失敗したら、JapanCertが全額で返金いたします。
Riverstoneの199-01試験の準備をしていたら、JapanCertは貴方が夢を実現することにヘルプを与えます。 JapanCertのRiverstoneの199-01試験トレーニング資料は高品質のトレーニング資料で、１００パーセントの合格率を保証できます。もしあなたが適当な時間を持って勉強できるのなら、JapanCertのRiverstoneの199-01試験トレーニング資料を選びましょう。この資料を手に入れたら、楽に試験の準備をすることができます。
Riverstoneの199-01認定試験を受けて199-01認証資格を取得したいですか。JapanCertはあなたの成功を保証することができます。もちろん、試験の準備をするときに試験に関連する知識を学ぶのは必要です。なお大切なのは、自分に相応しい効率的なツールを選択することです。JapanCertの199-01問題集はあなたに合う最善の勉強法です。この高品質の問題集は信じられないほどの結果を見せることができます。自分が試験に合格できない心配があれば、はやくJapanCertのウェブサイトをクリックしてもっと多くの情報を読んでください。
試験番号：199-01問題集
試験科目：Riverstone 「Riverbed Certified Solutions Professional」
最近更新時間：2014-02-11
問題と解答：276
JapanCertに提供されている資料はIT認定試験に対して10年過ぎの経験を持っているプロフェッショナルによって研究と実践を通じて作成し出されたものです。JapanCertは最新かつ最も正確な試験199-01問題集を用意しておきます。JapanCertは皆さんの成功のために存在しているものですから、JapanCertを選択することは成功を選択するのと同じです。順調にIT認定試験に合格したいなら、JapanCertはあなたの唯一の選択です。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/199-01.html
NO.1 A QoS policy defines three classes of service including the class "default".The class "default" should
have a DSCP marking of default value and act as a "catchall" for traffic.Which of the following QoS DSCP
rules is correct?
A.qos dscp rule traffic-type optimized src 10.0.0.4 dest 10.0.0.1 dscp 12 rulenum 3
B.qos dscp rule traffic-type optimized src 10.0.0.4 dest 10.0.0.1 dscp 0 rulenum 1
C.qos dscp rule traffic-type optimized src all dest all dscp default rulenum 3
D.qos dscp rule traffic-type optimized src all dest all dscp 0 rulenum 1
E.qos dscp rule traffic-type optimized src all dest all dscp 0 rulenum 3
Answer:E
Riverstone過去問 199-01 199-01認定試験
NO.2 What value (in hexadecimal) is added to the TCP option field by the client-side Steelhead appliance
during auto-discovery?
A.0x76
B.0xFC
C.0x4C
D.0xEC
Answer:C
Riverstone問題集 199-01認定証 199-01認証試験
NO.3 Of the following, which class priority is defined for the "default" QoS class?
A.Real-time
B.Interactive
C.Business Critical
D.Normal
E.Low Priority
Answer:D
Riverstone認定証 199-01 199-01認証試験 199-01 199-01
NO.4 What does CIFS transparent prepopulation require in order to be configured? (Select 3)
A.Join Windows Domain
B.Remote Shared Path
C.Credentials
D.Schedule
E.Data Center Steelhead IP
Answer:BCD
Riverstone過去問 199-01過去問 199-01 199-01認定試験 199-01 199-01認証試験
NO.5 Which of the following are a complete list of in-path rule types available for configuration on a
Steelhead appliance?
A.auto discovery, pass through, fixed-target
B.auto discovery, pass through, fixed-target, discard
C.auto discovery, pass through, fixed-target, discard, deny
D.auto discovery, pass through, fixed-target, forced peer, discard, deny
Answer:C
Riverstone 199-01 199-01 199-01 199-01認定資格
NO.6 What are the key benefits of Scalable Data Referencing (SDR)? (Select 2)
A.Reduces data sent across the WAN
B.Reduces data sent across the LAN
C.Speed up data transfers across the WAN
D.Speed up data transfers across the LAN
E.Speed up all UDP connections across the WAN
Answer:AC
Riverstone 199-01練習問題 199-01認定資格 199-01
NO.7 What types of IPSec encryption ciphers are supported by default on the Steelhead appliance? (Select 2)
A.DES
B.3DES
C.AES
D.NULL
E.RC2
Answer:ADB
Riverstone過去問 199-01 199-01練習問題 199-01 199-01 199-01
NO.8 Data for inactive flows will get exported to a NetFlow collector after 15 seconds of flow inactivity. In order
to reduce the amount of traffic sent across the WAN, you would like to increase this value to 1 minute.
Which of the following CLI commands can be used to change the export timer for inactive flows to 1
minute? (Hint: Use the calculator)
A.ip netflow inactive_to 60
B.ip flow-setting inactive_to 60
C.ip netflow inactive_to 1
D.ip flow-setting inactive_to 1
E.The export time of 15 seconds cannot be changed
Answer:B
Riverstone 199-01認証試験 199-01問題集
NO.9 What are the available interfaces to use for NetFlow export on a Steelhead appliance with a 4-port
card? (Select 2)
A.WAN0_0
B.WAN1_0
C.Primary
D.LAN0_0
E.AUX
Answer:CE
Riverstone練習問題 199-01 199-01認証試験 199-01認定資格
NO.10 Under what circumstances will the NetFlow cache entries flush (transmitted to the collector)?
(Select 3)
A.When inactive flows have remained for 15 seconds
B.When inactive flows have remained for 30 minutes
C.When active flows have remained for 30 minutes
D.When the TCP URG bit is set
E.When the TCP FIN bit is set
Answer:ACE
Riverstone 199-01問題集 199-01認定証 199-01
NO.11 Which of the following would most likely represent the best class for classifying VoIP traffic?
A.Real-time
B.Interactive
C.Business Critical
D.Normal
E.Low Priority
Answer:A
Riverstone練習問題 199-01参考書 199-01 199-01 199-01練習問題
NO.12 Which of the following may cause Asymmetric Route Detection?
A.Receiving an RST packet from the client with an invalid sequence number while the connection is in the
SYN_SENT state
B.Receiving a SYN/ACK packet from the server with an invalid ACK number while the connection is in the
SYN_SENT state
C.Receiving an ACK packet from the client while the connection is in the SYN_SENT state
D.Receiving SYN retransmits from the client
E.All of the above
Answer:E
Riverstone 199-01参考書 199-01
NO.13 What version of NetFlow does Riverbed RiOS support?
A.NetFlow v1
B.NetFlow v5
C.NetFlow v7
D.NetFlow v8
E.NetFlow v9
Answer:B
Riverstone参考書 199-01 199-01
NO.14 Upon implementing a NetFlow based reporting solution, your auditing department asks you why it takes
30 minutes for active data flows to report back to the NetFlow collector, and if you can change it to 15
minutes. Which of the following CLI commands can be used to change the export timer for active flows to
15 minutes? (Hint: Use the calculator)
A.ip flow-setting active_to 900
B.ip flow-setting active_to 15
C.ip netflow active_to 30
D.ip netflow active_to 900
E.The export time of 30 minutes cannot be changed
Answer:A
Riverstone認定資格 199-01認定証 199-01認定証
NO.15 Under what circumstances will the NetFlow cache entries flush (transmitted to the collector)?
A.When the TCP FIN bit is set
B.When the TCP PSH bit is set
C.When the TCP RST bit is set
D.A and C
E.A and B
F.None of the above
Answer:D
Riverstone認定資格 199-01練習問題 199-01 199-01
NO.16 Which of the following QoS mechanisms are supported in the Steelhead appliance? (Select 4)
A.NBAR
B.Traffic Shaping
C.Prioritization
D.Classification
E.Marking
Answer:BCDE
Riverstone 199-01 199-01 199-01認証試験 199-01
NO.17 Assuming the default settings for Connection Forwarding, how long does it take for a Steelhead
appliance to declare a neighbor is down?
A.10 seconds
B.15 seconds
C.20 seconds
D.25 seconds
E.30 seconds
Answer:E
Riverstone 199-01 199-01 199-01練習問題 199-01 199-01
NO.18 A customer would like to convert the Steelhead appliance into an ingress DiffServ node.Prior to that,
the router was playing this role and it has the following QoS policy:
policy-map riverbed
class voip
priority percent 10
!
class mission-critical5
bandwidth percent 30
random-detect
!
class transactional
bandwidth percent 20
random-detect
!
class class-default
fair-queue
random-detect
!
Which of the following commands correctly define the mission-critical class as well as classify optimized
traffic from the 192.12.12.0/24 subnet destined to the 192.13.13.0/24 port 8080 into the class? (Select 2)
A.qos classification class add class-name mission-critical priority realtime min-pct 10
B.qos classification class add class-name mission-critical priority interactive min-pct 10
C.qos classification class add class-name mission-critical priority interactive min-pct 30
D.qos classification rule add rulenum 2 class-name mission-critical traffic-type passthrough source subnet
192.12.12.0/24 port all destination subnet 192.13.13.0/24 port 8080
E.qos classification rule add rulenum 2 class-name mission-critical traffic-type optimized source subnet
192.12.12.0/24 port all destination subnet 192.13.13.0/24 port 8080
Answer:CE
Riverstone過去問 199-01 199-01認定証 199-01 199-01
NO.19 Asymmetric Route Detection configured on the client-side Steelhead appliance examines which of the
following TCP flags to determine if route asymmetry has occurred?
A.RST
B.FIN
C.PSH
D.URG
Answer:A
Riverstone参考書 199-01認証試験 199-01参考書 199-01 199-01問題集
NO.20 A customer would like to convert the Steelhead appliance into an ingress DiffServ node. Prior to that,
the router was playing this role and it has the following QoS policy:
policy-map riverbed
class voip
priority percent 10
!
class mission-critical
bandwidth percent 30
random-detect
!
class transactional
bandwidth percent 20
random-detect
!
class class-default
fair-queue
random-detect
!
Which of the following commands best defines the transactional class as well as classify all traffic from
the 192.16.16.0/24 subnet destined to the 192.17.17.0/24 port 3300 into the class? (Select 2)
A.qos classification class add class-name transactional priority business min-pct 20
B.qos classification class add class-name transactional priority low min-pct 20
C.qos classification class add class-name transactional priority interactive min-pct 30
D.qos classification rule add class-name transactional traffic-type optimized source subnet
192.16.16.0/24 port all destination subnet 192.17.17.0/24 port all rulenum 1
E.qos classification rule add class-name transactional traffic-type all source subnet 192.16.16.0/24 port all
destination subnet 192.17.17.0/24 port 3300 rulenum 3
Answer:AE
Riverstone 199-01認定資格 199-01
JapanCertは最新の00M-624問題集と高品質のNS0-156問題と回答を提供します。JapanCertのPMI-100 VCEテストエンジンと70-561試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP2-K35 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论