JapanCertの60-DSFA680問題集というものをきっと聞いたことがあるでしょう。でも、利用したことがありますか。「JapanCertの60-DSFA680問題集は本当に良い教材です。おかげで試験に合格しました。」という声がよく聞こえています。JapanCertは問題集を利用したことがある多くの人々からいろいろな好評を得ました。それはJapanCertはたしかに受験生の皆さんを大量な時間を節約させ、順調に試験に合格させることができますから。
JapanCertがもっと早くAltirisの60-DSFA680認証試験に合格させるサイトで、Altirisの60-DSFA680認証試験についての問題集が市場にどんどん湧いてきます。JapanCertを選択したら、成功をとりましょう。
多くの人々は高い難度のIT認証試験に合格するのは専門の知識が必要だと思います。それは確かにそうですが、その知識を身につけることは難しくないとといわれています。IT業界ではさらに強くなるために強い専門知識が必要です。
現在の社会の中で優秀なIT人材が揃て、競争も自ずからとても大きくなって、だから多くの方はITに関する試験に参加してIT業界での地位のために奮闘しています。60-DSFA680はAltirisの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。
JapanCertが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
JapanCertの専門家チームは彼らの経験と知識を利用して長年の研究をわたって多くの人は待ちに待ったAltirisの60-DSFA680認証試験について教育資料が完成してから、大変にお客様に歓迎されます。JapanCertの模擬試験は真実の試験問題はとても似ている専門家チームの勤労の結果としてとても値打ちがあります。
試験番号：60-DSFA680問題集
試験科目：Altiris 「Altiris Deployment Solution Foundation 6.8」
最近更新時間：2014-02-25
問題と解答：99
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/60-DSFA680.html
NO.1 AClient has not been password protected.
Which three tasks can be performed after right-clicking on the AClient icon from a managed computer?
(Choose three.)
A. initiate Microsoft's Sysprep Utility in preparation for imaging
B. view the AClient log file when log files have been enabled
C. change the name of the managed computer as it appears in the Deployment Console
D. change the NetBIOS name of the managed computer
E. monitor AClient's communication with the Deployment Server
F. reinstall AClient
G. edit the AClient template file
Answer: BCE
Altiris認定証 60-DSFA680認定証 60-DSFA680参考書 60-DSFA680過去問
NO.2 Which required symbol identifies the opening and closing of a Deployment token?
A. %
B. #
C. $
D. *
Answer: A
Altiris 60-DSFA680 60-DSFA680参考書 60-DSFA680 60-DSFA680
NO.3 When using the DOS operating system, image files with an .EXE file extension _____?
A. cannot be deployed using a Deployment job
B. must be converted to .IMG before they can be deployed with a Deployment job
C. cannot be converted to .IMG files
D. can be deployed without using additional Altiris imaging software
Answer: D
Altiris 60-DSFA680 60-DSFA680認定試験
NO.4 You have deployed a hardware independent image to an ACPI Uniprocessor computer and now the
computer will not start.
What is the probable cause?
A. the wrong hardware abstraction layer (HAL) was deployed
B. Sysprep was not run on the source computer
C. the ACPI Uniprocessor computer does not support hardware independent images
D. a clean Windows installation was not performed on the source computer before creating the hardware
independent image.
Answer: A
Altiris 60-DSFA680過去問 60-DSFA680 60-DSFA680 60-DSFA680認定試験
NO.5 Deployment Agents (such as AClient) can be installed on remote computers using the Remote Agent
Installer, but only when the remote computers are running which four operating systems? (Choose four.)
A. Windows 2000
B. Windows 95
C. Windows NT
D. Windows XP
E. Windows 2003
F. Linux
G. Windows 98
Answer: ACDE
Altiris 60-DSFA680 60-DSFA680 60-DSFA680認定試験 60-DSFA680練習問題
NO.6 Which program lets you edit image files after they have been created?
A. ImgViewer
B. ImageExplorer
C. ImageEditor
D. ImageManager
E. ImgManager
Answer: B
Altiris問題集 60-DSFA680 60-DSFA680問題集
NO.7 Which Deployment Console method lets you work with software virtualization layers?
A. using a Deployment job
B. selecting Tools > Software Virtualization
C. right-clicking on a computer and selecting Software Virtualization > Manage Layers
Answer: A
Altiris認定資格 60-DSFA680認定証 60-DSFA680 60-DSFA680認証試験
NO.8 AClient has been installed on your Windows XP managed computers.
Which three methods can be used to change the settings AClient is currently using? (Choose three.)
A. from the Deployment Console, right-click on the computer and select Change Agent Settings
B. from the Deployment Console, select Tools > AClient > Configurations
C. from the managed computer, select Start > All Programs > Altiris > AClient > Configuration
D. from the managed computer, double-click the AClient icon located in the system tray and select
Properties
E. from the Deployment Console, double-click on a computer and edit the client properties
F. use the Deployment Console to reinstall AClient with the desired settings
Answer: ADF
Altiris 60-DSFA680認証試験 60-DSFA680
NO.9 Deployment Solution's Simple Install Helper will check for and install which required third-party
software? (Choose two.)
A. Java
B. DirectX
C. ActiveX
D. .NET framework
E. Pre-boot automation operating systems
F. SQL
Answer: DF
Altiris練習問題 60-DSFA680 60-DSFA680 60-DSFA680 60-DSFA680練習問題
NO.10 When using Altiris PXE servers in a Deployment System, which PXE statement is true?
A. Multiple PXE servers can only be installed if a router separates them.
B. If a PXE server is configured to delay its response, it will respond only if no other PXE server responds
immediately.
C. A managed computer only uses the first PXE server it hears from.
D. Configuring multiple PXE servers to respond immediately causes errors on the managed computers.
Answer: C
Altiris認定資格 60-DSFA680 60-DSFA680 60-DSFA680 60-DSFA680
NO.11 Which utility removes the security ID (SID) before making an image of a computer?
A. SIDgenerator
B. SetupCapture
C. Sysprep
D. ImageExplorer
E. SIDconfig
Answer: C
Altiris認定証 60-DSFA680 60-DSFA680 60-DSFA680参考書 60-DSFA680
NO.12 You can use _____ to ensure that your PXE servers are servicing the correct managed computers.
A. IP blocking
B. Conditions
C. MAC filtering
D. NetBIOS name recognition
Answer: C
Altiris問題集 60-DSFA680認証試験 60-DSFA680 60-DSFA680 60-DSFA680練習問題
NO.13 AClient (on a managed computer) has been configured to use a multicast packet to locate the
Deployment Server.
Which statement is now true?
A. moving this computer to a different Deployment System requires the AClient agent be reconfigured
B. images can be sent using unicast packets or multicast packets
C. this setting configures images to be sent to the computer using multicasting technology
D. the Deployment Server must be configured to obtain its IP address from a DHCP server
Answer: B
Altiris 60-DSFA680問題集 60-DSFA680認定資格 60-DSFA680
NO.14 Which Altiris utility creates the necessary media to run the Initial Deployment job from a CD?
A. ImageExplorer
B. RapiDeploy
C. PXE Configuration Utility
D. Initial Deployment Configuration Utility
E. Boot Disk Creator
Answer: E
Altiris練習問題 60-DSFA680 60-DSFA680問題集 60-DSFA680練習問題
NO.15 While imaging computers, Deployment Solution supports the use of UNDI drivers.
Which UNDI driver statements are true? (Choose two.)
A. UNDI drivers are written specifically to work with the Altiris automation process.
B. UNDI drivers must be downloaded and installed from Intel's Web site before they can be used.
C. UNDI drivers let you image computers without obtaining a specific manufacturer's network driver for
each network card.
D. UNDI drivers do not support multicasting of hard disk images across the entire network.
E. UNDI drivers support multicasting of hard disk images across the entire network.
Answer: CD
Altiris認証試験 60-DSFA680 60-DSFA680練習問題 60-DSFA680 60-DSFA680認定証
NO.16 Which Deployment Solution component stores the main Deployment System program files?
A. Deployment Server
B. Deployment Database
C. Deployment Share
D. Microsoft DHCP Server
E. Deployment PXE Server
F. Deployment Console
Answer: C
Altiris問題集 60-DSFA680 60-DSFA680認定試験 60-DSFA680
NO.17 You are using the Deployment Console's New Job Wizard to migrate a computer's personality from
one computer to different computer.
What happens to the names of these two computers during this process?
A. The destination computer is automatically given a new unique name.
B. The source computer is automatically renamed and the destination computer gets the original name of
the source computer.
C. The two computers will end up with identical names, therefore you must rename one of the computers
manually.
Answer: B
Altiris練習問題 60-DSFA680認定資格 60-DSFA680 60-DSFA680 60-DSFA680認定試験
NO.18 When capturing a computer's personality, the application settings used for this process are located in
which file type?
A. .INI
B. .A2I
C. .ASI
D. .PBT
Answer: B
Altiris 60-DSFA680練習問題 60-DSFA680認定試験
NO.19 Which statement about deploying computer image files is true?
A. The RDeploy switch used to preserve existing partitions is enabled by default.
B. Aborting the deployment process (after imaging as started) corrupts the destination computer's hard
drive.
C. The maximum space required on the destination hard drive is equal to the size of the image file.
D. The imaging process is non-destructive, and adds data to what is already stored on an existing hard
drive partition.
Answer: B
Altiris 60-DSFA680認定資格 60-DSFA680 60-DSFA680認定資格 60-DSFA680
NO.20 How does a Deployment Solution job let you work with software virtualization layers? (Choose two.)
A. layers can be imported to a managed computer
B. layers can be created
C. the state of a layer can be managed (activated, deactivated, and so forth)
D. the content of a layer can be modified
Answer: AC
Altiris認定証 60-DSFA680 60-DSFA680練習問題 60-DSFA680
JapanCertは最新の000-820問題集と高品質の000-318問題と回答を提供します。JapanCertのJN0-694 VCEテストエンジンとC_TBIT44_731試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の74-335 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论