2014年2月23日星期日

EXIN SCNS認定試験の的中率が高い問題集がほしい?

君はまだEXINのSCNS認証試験を通じての大きい難度が悩んでいますか? 君はまだEXIN SCNS認証試験に合格するために寝食を忘れて頑張って復習しますか? 早くてEXIN SCNS認証試験を通りたいですか?JapanCertを選択しましょう!JapanCertはきみのIT夢に向かって力になりますよ。JapanCertは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。

JapanCertを選択したら100%試験に合格することができます。試験科目の変化によって、最新の試験の内容も更新いたします。JapanCertのインターネットであなたに年24時間のオンライン顧客サービスを無料で提供して、もしあなたはJapanCertに失敗したら、弊社が全額で返金いたします。

JapanCertはあなたに素晴らしい資料を提供するだけでなく、良いサービスも提供してあげます。JapanCertの試験SCNS問題集を購入したら、JapanCertは無料で一年間のアップデートを提供します。すると、あなたがいつでも最新のSCNS試験情報を持つことができます。それに、万一の場合、問題集を利用してからやはり試験に失敗すれば、JapanCertは全額返金のことを約束します。こうすれば、まだ何を心配しているのですか。心配する必要がないでしょう。JapanCertは自分の資料に十分な自信を持っていますから、あなたもJapanCertを信じたほうがいいです。あなたのSCNS試験の成功のために、JapanCertをミスしないでください。JapanCertをミスすれば、あなたが成功するチャンスを見逃したということになります。

成功した方法を見つけるだけで、失敗の言い訳をしないでください。EXINのSCNS試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。JapanCertのEXINのSCNS試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。

あなたはIT職員ですか。今年で一番人気があるIT認証試験に申し込みましたか。もし「はい」と答えてくれたら、あなたはラッキですよ。JapanCertのEXINのSCNSトレーニング資料はあなたが100パーセント試験に合格することを保証しますから。これは絶対に真実なことです。IT業種でより高いレベルに行きたいのなら、JapanCertを選ぶのは間違いなく選択です。当社のトレーニング資料はあなたが全てのIT認証試験に合格することを助けます。しかも値段が手頃です。信じないことはしないでください。JapanCertを利用したら分かります。

試験番号:SCNS問題集
試験科目:EXIN 「SCNS Tactical Perimeter Defense」
最近更新時間:2014-02-22
問題と解答:232

JapanCertはEXINのSCNS試験に向けて問題集を提供する専門できなサイトで、君の専門知識を向上させるだけでなく、一回に試験に合格するのを目標にして、君がいい仕事がさがせるのを一生懸命頑張ったウェブサイトでございます。

JapanCertの問題集を購入したら、あなたの試験合格率が100%を保証いたします。もし試験に失敗したら、弊社が全額で返金いたします。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/SCNS.html

NO.1 As per the specifications of RFC 1191: Path MTU Discovery, MTUs have been defined so that
transmitted datagram will not unnecessarily become fragmented when traveling across different types of
physical media. You are going to run several packet captures to be sure there are no out of spec packets
on your network. According to these specifications what are the absolute minimum and maximum MTUs?
A. 1492 Bytes and 1500 Bytes respectively
B. 68 Bytes and 65535 Bytes respectively
C. 512 Bytes and 1500 Bytes respectively
D. 512 bits and 1500 bits respectively
E. 512 bits per second and 1500 bits per second respectively
Answer: B

EXIN認定資格   SCNS   SCNS認定試験   SCNS

NO.2 Your network traffic has increased substantially over the last year, and you are looking into your
caching options for frequently visited websites. What are the two types of caching that ISA Server 2006
supports?
A. Reverse caching
B. Forward caching
C. Inverse caching
D. Recursive caching
E. Real-time caching
Answer: A,B

EXIN   SCNS認定試験   SCNS認証試験   SCNS認定証   SCNS認定証

NO.3 You have recently taken over the security of a mid-sized network. You are reviewing the current
configuration of the IPTables firewall, and notice the following rule:
ipchains -A input -p TCP -d 0.0.0.0/0 12345 -j DENY
What is the function of this rule?
A. This rule for the output chain states that all incoming packets from any host to port 12345 are to be
denied.
B. This rule for the input chain states that all incoming packets from any host to port 12345 are to be
denied.
C. This rule for the input chain states that any TCP traffic from any address destined for any IP address
and to port 12345 is to be denied.
D. This rule for the output chain states that any TCP traffic from any address destined for any IP address
and to port 12345 is to be denied.
E. This rule for the input chain states that all TCP packets inbound from any network destined to any
network is to be denied for ports 1, 2, 3, 4, and 5.
Answer: C

EXIN認証試験   SCNS認証試験   SCNS認定資格   SCNS認定証

NO.4 You are configuring your new IDS machine, where you have recently installed Snort. While you are
working with this machine, you wish to create some basic rules to test the ability to log traffic as you desire.
Which of the following Snort rules will log any tcp traffic from any host other than 172.16.40.50 using any
port, to any host in the 10.0.10.0/24 network using any port? A. log udp ! 172.16.40.50/32 any ->
10.0.10.0/24 any
B. log tcp ! 172.16.40.50/32 any -> 10.0.10.0/24 any
C. log udp ! 172.16.40.50/32 any <> 10.0.10.0/24 any
D. log tcp ! 172.16.40.50/32 any <> 10.0.10.0/24 any
E. log tcp ! 172.16.40.50/32 any <- 10.0.10.0/24 any
Answer: B

EXIN   SCNS認定資格   SCNS   SCNS参考書

NO.5 What step in the process of Intrusion Detection as shown in the exhibit would determine if given alerts
were part of a bigger intrusion, or would help discover infrequent attacks?
A. 5
B. 9
C. 12
D. 10
E. 4
Answer: C

EXIN認定証   SCNS練習問題   SCNS認定試験   SCNS認定試験

NO.6 For the new Snort rules you are building, it will be required to have Snort examine inside the content of
the packet. Which keyword is used to tell Snort to ignore a defined number of bytes before looking inside
the packet for a content match?
A. Depth
B. Offset
C. Nocase
D. Flow_Control
E. Classtype
Answer: B

EXIN   SCNS過去問   SCNS   SCNS練習問題

NO.7 During your review of the logs of your Cisco router, you see the following line. What is the meaning of
this line?
%SYS-5-CONFIG_I: Configured from console by vty1 (172.16.10.1)
A. A normal, but noteworthy event
B. An informative message
C. A warning condition has occurred
D. A debugging message
E. An error condition has occurred
Answer: A

EXIN認定証   SCNS認定試験   SCNS参考書   SCNS   SCNS練習問題   SCNS

NO.8 You are considering your options for a new firewall deployment. At which three layers of the OSI model
does a stateful packet filtering firewall operate?
A. Presentation
B. Data Link
C. Network
D. Application
E. Transport
Answer: B,C,E

EXIN   SCNS   SCNS練習問題

NO.9 You are configuring a Cisco Router, and are creating Access Control Lists as part of the security of the
network. When creating Wildcard Masks, which of the following rules apply?
A. If the wildcard mask bit is a 1, then do not check the corresponding bit of the IP address for a match.
B. If the wildcard mask bit is a 0, then do not check the corresponding bit of the IP address for a match.
C. If the wildcard mask bit is a 1, then do check the corresponding bit of the IP address for a match.
D. If the wildcard mask bit is a 0, then do check the corresponding bit of the IP address for a match.
E. To create a Wildcard Mask, always take the inverse of the Subnet Mask.
Answer: A,D

EXIN   SCNS過去問   SCNS   SCNS認定証   SCNS認定試験

NO.10 The exhibit represents a simple routed network. Node 7 is a Windows 2000 Professional machine that
establishes a TCP communication with Node 10, a Windows 2003 Server. The routers are Cisco 2500
series running IOS 11.2.
While working at Node 10, you run a packet capture. Packets received by Node 10, and sent from Node 7
will reveal which of the following combination of source IP and source Physical addresses:
A. Source IP address 10.0.10.115, Source Physical address for Node 7
B. Source IP address 50.0.50.1, Source Physical address for Node 7
C. Source IP address for Router D's Int E0, Source Physical address for Node 7
D. Source IP address 10.0.10.115, Source Physical address Router D's Int E0
E. Source IP addresses for both Nodes 7 and Router D's Int E0, Source Physical address for both Nodes
7 and Router D's Int E0.
Answer: D

EXIN認定資格   SCNS練習問題   SCNS認証試験   SCNS練習問題

NO.11 You are monitoring the network traffic on your Frame-Relay Internet connection. You notice a large
amount of unauthorized traffic on port 21. You examine the packets, and notice there are no files being
transferred. Traffic on what other port must be examined to view any file contents?
A. 20
B. 119
C. 23
D. 80
E. 2021
Answer: A

EXIN認証試験   SCNS認定試験   SCNS

NO.12 You are configuring a new IDS, running Snort, in your network. To better configure Snort, you are
studying the configuration file. Which four of the following are the primary parts of the Snort configuration
file?
A. Postprocessors
B. Variables
C. Preprocessors
D. Output Plug-ins
E. Rulesets
Answer: B,C,D,E

EXIN   SCNS参考書   SCNS   SCNS

NO.13 You have been given the task of building the new wireless networks for your office, and you need to
verify that your equipment will not interfere with other wireless equipment frequencies. What wireless
standard allows for up to 11 Mbps transmission rates and operates in the 2.4GHz range?
A. 802.11b
B. 802.11e
C. 802.11a
D. 802.11i
E. 802.11g
Answer: A

EXIN認証試験   SCNS過去問   SCNS認定証

NO.14 You are planning on implementing a token-based authentication system in your network. The network
currently is spread out over four floors of your building. There are plans to add three branch offices.
During your research you are analyzing the different types of systems. Which of the following are the two
common systems token-based authentication uses?
A. Challenge/Response
B. Random-code
C. Time-based
D. Challenge/Handshake
E. Password-Synch
Answer: A,C

EXIN   SCNS   SCNS   SCNS認定試験   SCNS認定試験

NO.15 There are several options available to you for your new wireless networking technologies, and you are
examining how different systems function. What transmission system uses short bursts combined
together as a channel?
A. Frequency Hopping Spread Spectrum (FHSS)
B. Direct Sequence Spread Spectrum (DSSS)
C. Lamar Anthell Transmission (LAT)
D. Digital Band Hopping (DBH)
E. Digital Channel Hopping (DCH)
Answer: A

EXIN認定資格   SCNS認定試験   SCNS認定資格

NO.16 When performing wireless network traffic analysis, what is the type and subtype for an 802.11
authentication packet?
A. Type AA Subtype AAAA
B. Type 00 Subtype 1011
C. Type 0A Subtype 0A0A
D. Type 11 Subtype 0000
E. Type A0 Subtype A1A0
Answer: B

EXIN過去問   SCNS認定資格   SCNS認証試験   SCNS

NO.17 You are introducing a co-worker to the security systems in place in your organization. During the
discussion you begin talking about the network, and how it is implemented. You mention something in
RFC 791, and are asked what that is. What does RFC 791 specify the standards for?
A. IP
B. TCP
C. UDP
D. ICMP
E. Ethernet
Answer: A

EXIN   SCNS認定試験   SCNS   SCNS   SCNS   SCNS認定証

NO.18 In the image, there are two nodes communicating directly, without an access point. In the packet on
the right side of the image, the Address 1 field is blank. If this packet is going to the other computer, what
is the value that must be filled in this blank address field?
A. 2345
B. 1234
C. ABCD
D. <null>
E. ABCD-1234
Answer: B

EXIN参考書   SCNS問題集   SCNS認定証   SCNS   SCNS問題集   SCNS

NO.19 If you capture an 802.11 frame, and the ToDS bit is set to zero and the FromDS bit is set to zero, what
type of WLAN is this frame a part of?
A. Mesh
B. Broadcast
C. Infrastructure
D. Hierarchical
E. Ad Hoc
Answer: E

EXIN   SCNS参考書   SCNS

NO.20 During a training presentation, that you are delivering, you are asked how wireless networks function,
compared to the OSI Model. What two layers of the OSI Model are addressed by the 802.11 standards? A.
Physical
B. Data Link
C. Network
D. Transport
E. Session
Answer: A,B

EXIN   SCNS認定資格   SCNS   SCNS

NO.21 You have just installed a new Intrusion Detection System in your network. You are concerned that there
are functions this system will not be able to perform. What is a reason an IDS cannot manage hardware
failures?
A. The IDS can only manage RAID 5 failures.
B. The IDS cannot be programmed to receive SNMP alert messages.
C. The IDS cannot be programmed to receive SNMP trap messages.
D. The IDS cannot be programmed to respond to hardware failures.
E. The IDS can only inform you that an event happened.
Answer: E

EXIN   SCNS   SCNS練習問題

NO.22 You are working on your companys IPTables Firewall; you wish to create a rule to address traffic using
ports 1024 through 2048. Which of the following would you use during the creation of your rule?
A. p:1024 P:2048
B. P:1024 p2048
C. p=1024-2048
D. 1024-2048
E. 1024:2048
Answer: E

EXIN   SCNS   SCNS練習問題   SCNS

NO.23 You have configured Snort to run on your SuSe Linux machine, and you are currently making the
configuration changes to your MySQL database. What is the result of running the following command at
the mysql prompt?
source /usr/share/doc/packages/snort/schemas/create_mysql;
A. This command tells MySQL to connect to the /usr directory when source files are required for Snort
rules.
B. This command tells MySQL that the source files for Snort are located in the /usr directory.
C. This command tells MySQL where to place the Snort capture files in the database.
D. This command tells MySQL to populate the database using the fields provided by Snort.
E. This command tells MySQL where to find the source data for connecting to Snort.
Answer: D

EXIN問題集   SCNS   SCNS

NO.24 At a policy meeting you have been given the task of creating the firewall policy. What are the two basic
positions you can take when creating the policy?
A. To deny all traffic and permit only that which is required.
B. To permit only IP traffic and filter TCP traffic
C. To permit only TCP traffic and filter IP traffic
D. To permit all traffic and deny that which is required.
E. To include your internal IP address as blocked from incoming to prevent spoofing.
Answer: A,D

EXIN   SCNS問題集   SCNS問題集   SCNS認定資格

NO.25 As you increase the layers of security in your organization, you must watch the network
behaviorclosely.
How can a firewall have a negative impact on the performance of your network?
A. It can authorize sensitive information from the wrong host
B. It can block needed traffic
C. It can decrypt secure communications that were supposed to get past the firewall encrypted
D. It can restrict bandwidth based on QoS
E. It can filter packets that contain virus signatures
Answer: B

EXIN   SCNS   SCNS過去問   SCNS

NO.26 You have implemented an IPSec policy, using only AH. You are analyzing your network traffic in
Network Monitor, which of the following statements are true about your network traffic.?
A. You will not be able to view the data in the packets, as it is encrypted.
B. You will not be able to identify the upper layer protocol.
C. You will be able to view the unencrypted data in the packets.
D. You will be able to identify the encryption algorithm in use.
E. You will not be able to view the packet header.
Answer: C

EXIN認証試験   SCNS   SCNS   SCNS   SCNS

NO.27 If you wish to create a new rule in ISA Server 2006 so that all file attachments with an .exe extension
that come through the firewall are dropped, what would you select in the Toolbox to create this rule?
A. Content Type
B. User Group
C. Destination Set
D. Protocol Set
E. Extension Type
Answer: A

EXIN   SCNS過去問   SCNS

NO.28 The CEO of your company has just issued a statement that the network must be more secure right
away. You have discussed several options with the Chief Security Officer and the Chief Technology
Officer. The results of your discussion are to implement IPSec. What are the two prime functions of IPSec
that you can let the CEO know will be addressed with the implementation?
A. Ensure data corruptibility
B. Ensure data integrity
C. Ensure data availability
D. Ensure data security
E. Ensure data deliverability
Answer: B,D

EXIN過去問   SCNS   SCNS練習問題   SCNS参考書

NO.29 In order to perform promiscuous mode captures using the Wireshark capture tool on a Windows Server
2003 machine, what must first be installed?
A. IPv4 stack
B. IPv6 stack
C. WinPcap
D. Nothing, it will capture by default
E. At least two network adapters
Answer: C

EXIN認定資格   SCNS認定試験   SCNS問題集   SCNS認定資格

NO.30 You are configuring the rules on your firewall, and need to take into consideration that some clients in
the network are using automatic addressing. What is the IP address range reserved for internal use for
APIPA in Microsoft networks?
A. 169.254.0.0 /4
B. 169.254.0.0 /16
C. 169.254.0.0 /8
D. 169.254.0.0 /0
E. 168.255.0.0 /16
Answer: B

EXIN認証試験   SCNS   SCNS   SCNS参考書

JapanCertは最新の74-325問題集と高品質のHP0-J65問題と回答を提供します。JapanCertのECP-102 VCEテストエンジンとC_TSCM62_65試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の70-464 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/SCNS.html

没有评论:

发表评论