HP2-Z12はHPのひとつの認証で、HP2-Z12がHPに入るの第一歩として、HP2-Z12試験がますます人気があがって、HP2-Z12に参加するかたもだんだん多くなって、しかしHP2-Z12認証試験に合格することが非常に難しいで、君はHP2-Z12に関する試験科目の問題集を購入したいですか？
JapanCertが提供した教育資料は真実のテストに非常に近くて、あなたが弊社の短期の特殊訓練問題を通じてすぐにIT専門の知識を身につけられます。弊社は君の試験の１００％合格率を保証いたします。
試験番号：HP2-Z12問題集
試験科目：HP 「Servicing HP Networking Products」
最近更新時間：2013-11-19
問題と解答：94
HP2-Z12はHPの一つ認証試験として、もしHP認証試験に合格してIT業界にとても人気があってので、ますます多くの人がHP2-Z12試験に申し込んで、HP2-Z12試験は簡単ではなくて、時間とエネルギーがかかって用意しなければなりません。
JapanCert HPのHP2-Z12試験資料は特別にデザインされたもので、IT領域のエリートが組み立てられた強い団体が受験生の皆様に向いて研究した資料です。認証試験に合格したら、あなたはIT領域で国際的な価値を表すことができます。JapanCertには多くのダンプおよびトレーニング資料のサプライヤーがありますから、あなたが試験に受かることを保証します。JapanCertは事実を通じて話しますから、奇跡が現れるときに我々が言ったすべての言葉を証明できます。
現状に自己満足して、自分の小さな持ち場を守って少ない給料をもらって解雇されるのを待っている人がいないです。こんな生活はとてもつまらないですから。あなたの人生をよりカラフルにしたいのですか。ここで成功へのショートカットを教えてあげます。即ちHPのHP2-Z12認定試験に受かることです。この認証を持っていたら、あなたは、高レベルのホワイトカラーの生活を送ることができます。実力を持っている人になって、他の人に尊敬されることもできます。JapanCertはHPのHP2-Z12試験トレーニング資料を提供できます。JapanCertを利用したら、あなたは美しい夢を実現することができます。さあ、ためらわずにJapanCertのHPのHP2-Z12試験トレーニング資料をショッピングカートに入れましょう。
あなたはIT職員ですか。今年で一番人気があるIT認証試験に申し込みましたか。もし「はい」と答えてくれたら、あなたはラッキですよ。JapanCertのHPのHP2-Z12トレーニング資料はあなたが１００パーセント試験に合格することを保証しますから。これは絶対に真実なことです。IT業種でより高いレベルに行きたいのなら、JapanCertを選ぶのは間違いなく選択です。当社のトレーニング資料はあなたが全てのIT認証試験に合格することを助けます。しかも値段が手頃です。信じないことはしないでください。JapanCertを利用したら分かります。
JapanCertのHP2-Z12には何か品質問題があることを見つければ、あるいは試験に合格しなかったのなら、弊社が無条件で全額返金することを約束します。JapanCertは専門的にHPのHP2-Z12試験の最新問題と解答を提供するサイトで、HP2-Z12についての知識をほとんどカバーしています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/HP2-Z12.html
NO.1 Which switch is specifically designed for networks that require basic connectivity and have little or no IT
support?
A. fixed-port switch
B. light Layer 3 switch
C. modular switch
D. unmanaged switch
Answer: D
HP HP2-Z12認証試験 HP2-Z12認定証 HP2-Z12認定資格
NO.2 You are installing a redundant power supply in an HP E8212 zl switch. Which procedures are
recommended when installing the new power supply?(Select two.)
A. Remove the copper RFI shielding.
B. Attach the new power supply to a different AC power source than the existing power supply to provide
true redundancy.
C. Tighten the retaining screws on the new power supply until they are snug but not over-tight.
D. Connect the redundant power supply to the AC power source before installing it in the switch.
E. Remove the grounding tap from the console port before installing the power supply.
Answer: B,C
HP HP2-Z12 HP2-Z12
NO.3 How can you check the status of the ports that are providing Power over Ethernet (PoE) on an HP
E2610-PWR switch?
A. Use the Mode button to selectPoE and then view the port Link and Mode LEDs
B. Use the Port Locator button to selectPoE and then view the port Status and Link LEDs.
C. View the portPoE LED.
D. Use the switch'sPoE LED and the PoE LED for each port.
Answer: A
HP HP2-Z12 HP2-Z12認証試験 HP2-Z12
NO.4 You are troubleshooting an HP A Series switch. You attempt to log in to both the CLI and the Web
browser interface in several different ways, but you are always prompted for credentials. The customer
tells you that the person who created the passwords is no longer employed by the company. What can
you do to access the switch?
A. Use the failsafe credentials, admin for username and password for password.
B. Press the Reset and Clear buttons on the switch's front panel, holding them for at least 5 seconds, to
clear the password
C. Access the Boot ROM menu and bypass the configuration, starting the switch at factory default
settings.
D. Access the switch over a direct console connection, which always permits access without a password.
Answer: C
HP認定資格 HP2-Z12認証試験 HP2-Z12認定証 HP2-Z12練習問題 HP2-Z12認定資格
NO.5 The exhibit shows the Power and seven-segment LEDs of an HP A Series switch. What is the switch's
status?
Exhibit:
A. The switch has member ID 8 in the cluster.
B. The switch has member ID 8 in the cluster, but its attempt to join the cluster has failed.
C. The switch has failed the power on self test (POST) with ID 8.
D. Port number 8 has failed the switch's power on self test (POST).
Answer: C
HP問題集 HP2-Z12練習問題 HP2-Z12 HP2-Z12 HP2-Z12問題集
NO.6 A faulty configuration on an HP A Series switch locked a customer out of the management interface.
You bypass the configuration and gain access to the switch's CLI.Your manager asks
you to send her the configuration to examine.
What must you do?
A. Establish IP connectivity between the switch and a BackUp the Startup-Config to a TFTP Server server
and issue the backup command
B. Use the copy command to copy the configuration to your management station.
C. Establish IP connectivity between the switch and your management station and use the save
command to save the configuration.
D. Use the saved-configuration command to select the startup-config and save it out to your management
station.
Answer: A
HP過去問 HP2-Z12 HP2-Z12
NO.7 DRAG DROP
Match the HP A Series switch user interface with the type of access that it controls.
Answer:
NO.8 You are installing an HP A Series switch that requires a backup power supply as well as extra power for
Power over Ethernet (PoE) devices. Which device should you connect to this switch?
A. RPS 1200 A
B. RPS 1000 A3
C. RPS 800 A
D. RPS500 A3
Answer: B
HP HP2-Z12 HP2-Z12 HP2-Z12問題集
NO.9 Several HP A Series switches are distinguished by a dual-personality (or combo) port. What is an
accurate description of this port?
A. It can accept either Ethernet Base-T cable or fiber optic cable
B. It can accept either Ethernet Base-T cable or a small form-factor pluggable (SFP) transceiver
C. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Both can be used simultaneously.
D. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Only one can be used at a time.
Answer: B
HP認定資格 HP2-Z12問題集 HP2-Z12認定証 HP2-Z12 HP2-Z12
NO.10 You check the startup-config on an HP A Series switch and find that the switch uses myconfig.cfg as
the main startup-config and has no backup config. What happens if you use the undo startup
savedconfiguration command?
A. The myconfig.cfg file is deleted, and the switch returns to factory default settings at the next reboot.
B. The myconfig.cfg file becomes the backup startup-config, and the switch returns to factory default
settings at the next reboot.
C. The myconfig.cfg file becomes the backup startup-config, and is booted at the next reboot unless you
set another main startup-config
D. The myconfig.cfg file is retained in the switch's memory, but the switch returns to factory default
settings at the next reboot
Answer: D
HP認定証 HP2-Z12認証試験 HP2-Z12 HP2-Z12
NO.11 You are installing an SFP transceiver in an HP A Series switch's SFP port. Which steps should you
perform? (Select two.)
A. Connect the fiber optic cable to the SFP transceiver before installing the transceiver.
B. Slide the transceiver into the SFP port until the spring clips catch.
C. Rotate the clasp, if present on the front of the transceiver, until it catches the knob.
D. Press and hold the spring clips on the SFP port
E. Press and hold the release button below the SFP port.
Answer: B,C
HP認証試験 HP2-Z12問題集 HP2-Z12 HP2-Z12問題集 HP2-Z12
NO.12 You are servicing an HP A Series switch, which is currently using a file call myconfig.cfg for the
startup-config. You want to preserve your new configuration changes in the switch's startup config.
Which command should you use?
A. write memory
B. save
C. save startup.cfg
D. copy running-config startup-config
Answer: D
HP練習問題 HP2-Z12認証試験 HP2-Z12 HP2-Z12 HP2-Z12認定証
NO.13 You have been sent to a customer site to check an HP E8212 zlswitch. When you arrive, you notice
that the Fault and Fan Status LEDs are flashing. What is the most likely cause of this LED behavior?
A. The cooling fan is no longer functional
B. The switch is brand new and needs to have the most current firmware installed.
C. The external power supply has failed, causing the fan to malfunction.
D. The switch has failed its self-test
Answer: C
HP問題集 HP2-Z12 HP2-Z12認証試験 HP2-Z12認証試験 HP2-Z12 HP2-Z12認証試験
NO.14 Which HP A Series switches provide Layer 2 functionality and a Web browser interface but no CLI?
A. HP A5800 Series switches
B. HP NJ2000GIntelliJack switches
C. HP A3600-E1 Series switches
D. HP A3100 Series switches
Answer: B
HP認定証 HP2-Z12 HP2-Z12 HP2-Z12
NO.15 You log in to an HP A Series switch over a console session in order to establish IP connectivity
between the switch and the rest of the network. What is the minimum user privilege level needed to
complete this task?
A. Operator
B. Monitor
C. System
D. Manage
Answer: C
HP HP2-Z12 HP2-Z12 HP2-Z12認定資格 HP2-Z12問題集
NO.16 Which area of the network is considered the backbone?
A. data center
B. core
C. distribution layer
D. LAN access layer
Answer: B
HP HP2-Z12参考書 HP2-Z12 HP2-Z12問題集
NO.17 You are troubleshooting a connection on an HP A Series switch that has one LED per-port. You want to
know if the port is operating in the wrong duplex mode. How do you use the LED to obtain relevant
information?
A. Click the Mode button until the mode LED is blinkinggreenand thencheck the port LED.
B. Click the Mode button until the mode LED is yellow and thencheck the port LED.
C. Check if the port LED is blinking,which indicates its duplex status (while its color indicates speed).
D. Check the color of the port LED, which indicates its duplex status (while its blinking indicates speed).
Answer: B
HP HP2-Z12認定試験 HP2-Z12 HP2-Z12 HP2-Z12認証試験
NO.18 Which HP E Switch Series is specifically designed to be deployed in a data center?
A. E4200vl
B. E6200yl
C. E6600
D. E8200zl
Answer: C
HP HP2-Z12 HP2-Z12認定資格 HP2-Z12 HP2-Z12
NO.19 Which E Series switches require two power supplies to be completely operational? (Select two.)
A. HP E4200vl switch
B. HP E5406zl switch
C. HP E5412zl switch
D. HP E2900 al switch
E. HP E8212zl switch
Answer: C,E
HP HP2-Z12認証試験 HP2-Z12練習問題 HP2-Z12認定試験
NO.20 Which device forwards network traffic based only on Layer 2 information?
A. router
B. switch
C. hub
D. firewall
Answer: C
HP HP2-Z12 HP2-Z12 HP2-Z12練習問題 HP2-Z12参考書
JapanCertは最新の70-464問題集と高品質のHP0-J62問題と回答を提供します。JapanCertの74-344 VCEテストエンジンとHP2-N37試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-318 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论