2013年11月23日星期六

利用に値するCisco 642-902認定試験の最新問題集

成功の楽園にどうやって行きますか。ショートカットは一つしかないです。それはJapanCertのCiscoの642-902試験トレーニング資料を利用することです。これは全てのIT認証試験を受ける受験生のアドバイスです。JapanCertのトレーニング資料を手に入れたら、あなたは成功への鍵を握るようになります。

あなたのキャリアでいま挑戦に直面していますか。自分のスキルを向上させ、よりよく他の人に自分の能力を証明したいですか。昇進する機会を得たいですか。そうすると、はやく642-902認定試験を申し込んで認証資格を取りましょう。Ciscoの認定試験はIT領域における非常に大切な試験です。Ciscoの642-902認証資格を取得すると、あなたは大きなヘルプを得ることができます。では、どのようにはやく試験に合格するかを知りたいですか。JapanCertの642-902参考資料はあなたの目標を達成するのに役立ちます。

今あなたが無料でJapanCertが提供したCiscoの642-902認定試験の学習ガイドをダウンロードできます。それは受験者にとって重要な情報です。

JapanCertが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。

人はそれぞれの夢を持っています。あなたの夢は何でしょうか。昇進ですか。あるいは高給ですか。私の夢はCiscoの642-902認定試験に受かることです。この認証の証明書を持っていたら、全ての難問は解決できるようになりました。この試験に受かるのは難しいですが、大丈夫です。私はJapanCertのCiscoの642-902試験トレーニング資料を選びましたから。私が自分の夢を実現することを助けられますから。あなたもITに関する夢を持っていたら、速くJapanCertのCiscoの642-902試験トレーニング資料を選んでその夢を実現しましょう。JapanCertは絶対信頼できるサイトです。

弊社のCiscoの642-902勉強資料を利用したら、きっと試験を受けるための時間とお金を節約できます。JapanCertのCiscoの642-902問題集を買う前に、一部の問題と解答を無料にダウンロードすることができます。PDFのバージョンとソフトウェアのバージョンがありますから、ソフトウェアのバージョンを必要としたら、弊社のカスタマーサービススタッフから取得してください。

試験番号:642-902問題集
試験科目:Cisco 「Implementing cisco ip routing」
最近更新時間:2013-11-22
問題と解答:375

JapanCertが提供する資料は比べものにならない資料です。これは前例のない真実かつ正確なものです。受験生のあなたが首尾よく試験に合格することを助けるように、当社のITエリートの団体はずっと探っています。JapanCertが提供した製品は真実なもので、しかも価格は非常に合理的です。JapanCertの製品を選んだら、あなたがもっと充分の時間で試験に準備できるように、当社は一年間の無料更新サービスを提供します。そうしたら、試験からの緊張感を解消することができ、あなたは最大のメリットを取得できます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/642-902.html

NO.1 How is authentication handled with OSPFv3?
A. OSPFv3 for IPv6 authentication is supported by SHA-1 authentication.
B. OSPFv3 for IPv6 authentication is supported by MD5 authentication.
C. OSPFv3 for IPv6 authentication is supported by IPv6 IPsec.
D. OSPFv3 for IPv6 authentication is supported by IPv4 IPsec.
Answer: C

Cisco練習問題   642-902   642-902

NO.2 During BGP configuration on a router that has peered with other BGP speakers, the BGP command
aggregate-address 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate
network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table.
Which option indicates a possible reason this command did not cause the router to advertise the
aggregate network to its peers?
A. Interface NULL 0 is likely shutdown.
B. The BGP command no synchronization is missing.
C. The BGP command no auto-summary is missing.
D. Subnets of 172.32.0.0/22 do not exist in the BGP table.
E. The IGP running on this router does not have network 172.32.0.0/22 installed.
F. The next hop IP address must be a loopback address.
Answer: D

Cisco   642-902練習問題   642-902

NO.3 Refer to the exhibit. Router RT-1 and router RT-2 both advertise network 131.25.0.0/16 to router RT-3
via internal BGP. What is the reason that router RT-3 chose router RT-1 as its best path to network
131.25.0.0/16.
A. It advertises the best AS-path.
B. It advertises the best origin code.
C. It advertises the best MED.
D. It advertises the best local preference.
E. It has a better router ID.
F. It advertises a lower autonomous system.
Answer: E

Cisco認定証   642-902参考書   642-902   642-902

NO.4 Refer to the exhibit. On the basis of the information in the exhibit, which two statements are true?
(Choose two.)
A. The output was generated by entering the show ip bgp command on the ISP router.
B. The output was generated by entering the show ip bgp command on the SanJose1 router.
C. The serial 0/0/1 interface on the ISP router has been configured with the set metric 50 command.
D. The serial 0/0/1 interface on the ISP router has been configured with the set metric 75 command.
E. When traffic is sent from the ISP to autonomous system 64512, the traffic will be forwarded to
SanJose1 because of the lower MED value of SanJose1.
F. When traffic is sent from the ISP to autonomous system 64512, the traffic will be forwarded to
SanJose2 because of the higher MED value of SanJose2.
Answer: AE

Cisco   642-902   642-902練習問題   642-902

NO.5 What is the difference between the IPv6 addresses ::/0 and ::/128?
A. ::/0 is the unspecified address, and ::/128 is the multicast address.
B. ::/0 is the unicast address, and ::/128 is the anycast address.
C. ::/0 is the unicast address, and ::/128 is the multicast address.
D. ::/0 is the anycast address, and ::/128 is the multicast address.
E. ::/0 is the default route, and ::/128 is the unspecified address.
F. ::/0 is the anycast address, and ::/128 is the default address.
Answer: E

Cisco   642-902参考書   642-902   642-902

NO.6 Refer to the partial configurations in the exhibit. What address is utilized for DR and BDR identification
on Router1?
A. the serial 1/1 address
B. the serial 2/0 address
C. a randomly generated internal address
D. the configured router-id address
Answer: D

Cisco認定証   642-902   642-902認定資格   642-902   642-902

NO.7 Which three restrictions apply to OSPF stub areas? (Choose three.)
A. No virtual links are allowed.
B. The area cannot be a backbone area.
C. Redistribution is not allowed unless the packet is changed to a type 7 packet.
D. The area has no more than 10 routers.
E. No autonomous system border routers are allowed.
F. Interarea routes are suppressed.
Answer: ABE

Cisco   642-902参考書   642-902認証試験

NO.8 A router has two paths to reach another network in a different autonomous system. Neither route was
generated by the local router and both routes have the same default weight and local preference values.
Which statement is true about how BGP would select the best path?
A. If the command bgp always-compare-med has been given, then the router will prefer the route with the
highest MED.
B. The router will prefer the route with the lower MED.
C. The router will prefer the shortest autonomous system path.
D. To influence one route to be preferred, its default local preference value will be changed via the use of
the command bgp default local-preference 50.
Answer: C

Cisco認定試験   642-902   642-902認定試験

NO.9 What two situations could require the use of multiple routing protocols? (Choose two)
A. when using UNIX host-based routers
B. when smaller broadcast domains are desired
C. because having multiple routing protocols confuses hackers
D. when migrating from an older Interior Gateway Protocol (IGP) to a new IGP
E. when all equipment is manufactured by Cisco
F. when there are multiple paths to destination networks
Answer: AD

Cisco   642-902   642-902   642-902認定証

NO.10 Refer to the exhibit.
Which two statements are true about the partial configuration that is provided. (Choose two.)
A. All the configured neighbors are in autonomous system 100.
B. The peer group shortens the IBGP configuration.
C. The peer group shortens the EBGP configuration.
D. Only the outgoing filters are applied to BGP updates.
E. Three AS-path filters are applied to each BGP neighbor.
Answer: AB

Cisco認定資格   642-902   642-902問題集

NO.11 Refer to the exhibit. Router RT-1 chooses one path to network 198.133.219.0/24. Indicate the reason
Router RT-1 chooses this "best" path.
A. In making its decision about the best path, RT-1 gives precedence to the origin code.
B. In making its decision about the best path, RT-1 gives precedence to the BGP MED values.
C. IP address 128.107.2.2 is lower than 128.107.255.2.
D. In making its decision about the best path, RT-1 prefers the IGP metrics.
E. RT-1 prefers internal BGP routes.
F. IP address 128.107.254.2 is lower than 128.107.255.2.
Answer: A

Cisco認証試験   642-902認定資格   642-902問題集   642-902認定資格

NO.12 Refer to the exhibit.
Which two statements are correct? (Choose two.)
A. All six routes will be installed in the routing table.
B. Two routes will be installed in the routing table.
C. Four routes will be installed in the routing table.
D. All the routes were redistributed into BGP from an IGP.
E. All the routes were originated by BGP with the network command.
Answer: CD

Cisco認定証   642-902過去問   642-902

NO.13 Into which two types of areas would an area border router (ABR) inject a default route.? (Choose two.)
A. the autonomous system of a different interior gateway protocol (IGP)
B. area 0
C. totally stubby
D. NSSA
E. stub
F. the autonomous system of an exterior gateway protocol (EGP)
Answer: CE

Cisco問題集   642-902参考書   642-902   642-902参考書

NO.14 What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network in the show ip bgp
command output? (Choose two.)
A. The network was originated via redistribution of an interior gateway protocol into BGP.
B. The network was defined by a static route.
C. The network was originated via a network or aggregate command.
D. The network was learned via EBGP.
E. The network was learned via IBGP.
Answer: AC

Cisco   642-902   642-902

NO.15 Refer to the output.
What IOS command produces this output? .
A. show ip ospf
B. show ip ospf interface
C. show ipv6 ospf interface
D. show ipv6 ospf
Answer: D

Cisco過去問   642-902認証試験   642-902練習問題   642-902

NO.16 Refer to the exhibit.
Router RTA is the hub router for routers RTB and RTC. The Frame Relay network is configured with
EIGRP, and the entire network is in autonomous system 1. However, router RTB and RTC are not
receiving each other's routes. What is the solution?
A. Configure the auto-summary command under router eigrp 1 on router RTA.
B. Issue the no ip split-horizon command on router RTA.
C. Configure subinterfaces on the spoke routers and assign different IP address subnets for each
subinterface.
D. Check and change the access lists on router RTA.
E. Issue the no ip split-horizon eigrp 1 command on router RTA.
F. Configure a distribute-list on router RTA that allows it to advertise all routes to the spoke routers.
Answer: E

Cisco認定試験   642-902練習問題   642-902

NO.17 Using the rules for IPv6 addressing, how can the address
2031:0000:240F:0000:0000:09C0:123A:121B be rewritten?
A. 2031:0:240F::09C0:123A:121B
B. 2031::240F::09C0:123A:121B
C. 2031::240F:9C0::123A:121B
D. 2031::240F:::09C0:123A:121B
Answer: A

Cisco   642-902   642-902   642-902

NO.18 What are two rules for compacting IPv6 addresses? (Choose two.)
A. The maximum number of times a double colon can replace a 16-bit segment that consists of all zeroes
is two.
B. The leading zeroes in any 16-bit segment do not have to be written.
C. Every 16-bit segment that consists of all zeroes can be represented with a single colon.
D. The trailing zeroes in any 16-bit segment do not have to be written.
E. Any single, continuous string of one or more 16-bit segments that consists of all zeroes can be
represented with a double colon.
F. Two zeroes in the middle of any 16-bit segment do not have to be written.
Answer: BE

Cisco練習問題   642-902   642-902認証試験   642-902認定資格   642-902   642-902練習問題

NO.19 Refer to the exhibit.
Which statement is true?
A. Router RAR1 will accept only route 10.10.0.0/19 from its BGP neighbor.
B. Router RAR1 will send only route 10.10.0.0/19 to its BGP neighbor.
C. Only traffic with a destination from 10.10.0.0/19 will be permitted.
D. Only traffic going to 10.10.0.0/19 will be permitted.
Answer: A

Cisco認定資格   642-902   642-902   642-902参考書

NO.20 Refer to the exhibit.
On the basis of the configuration that is provided, how would the BGP updates that come from router R1
be replicated inside autonomous system 65200?
A. All BGP updates that are received on router R2 will be sent to routers R3 and R4. Routers R3 and R4
will then forward those BGP updates to router R5.
B. All BGP updates that are received on router R2 will not be sent to routers R3 and R4.
C. All BGP updates that are received on router R2 will be sent directly to router R5.
D. None of the BGP updates that are received on router R2 will ever be received by router R5.
Answer: D

Cisco過去問   642-902   642-902   642-902

JapanCertは最新のLOT-441問題集と高品質のLOT-406問題と回答を提供します。JapanCertの000-455 VCEテストエンジンとHP2-N40試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のMB6-871 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/642-902.html

没有评论:

发表评论