HPのHP0-S14認定試験の復習問題集

現在のこの社会の中で、優秀な人材が揃って、IT人材も多く、競争もとてもはげしくて、だから多くのIT者はIT認証試験に参加してIT業界での地位のために奮闘して、HP0-S14試験はHPの一つ重要な認証試験で、多くの人がHP認証されたくて試験に合格しなければなりません。

専門的に言えば、試験を受けるに関するテクニックを勉強する必要があります。JapanCertというサイトは素晴らしいソースサイトで、HPのHP0-S14の試験材料、研究材料、技術材料や詳しい解答に含まれています。問題集が提供したサイトは近年で急速に増加しています。あなたは試験の準備をするときに見当もつかないかもしれません。JapanCertのHPのHP0-S14試験トレーニング資料は専門家と受験生の皆様に証明された有効なトレーニング資料で、あなたが試験の合格することを助けられます。

試験の準備をするためにJapanCertのHPのHP0-S14試験トレーニング資料を買うのは冒険的行為と思ったとしたら、あなたの人生の全てが冒険なことになります。一番遠いところへ行った人はリスクを背負うことを恐れない人です。また、JapanCertのHPのHP0-S14試験トレーニング資料が信頼できるのは多くの受験生に証明されたものです。JapanCertのHPのHP0-S14試験トレーニング資料を利用したらきっと成功できますから、JapanCertを選ばない理由はないです。

JapanCert はプロなウェブサイトで、受験生の皆さんに質の高いサービスを提供します。プリセールス.サービスとアフターサービスに含まれているのです。JapanCertのHPのHP0-S14試験トレーニング資料を必要としたら、まず我々の無料な試用版の問題と解答を使ってみることができます。そうしたら、この資料があなたに適用するかどうかを確かめてから購入することができます。JapanCertのHPのHP0-S14試験トレーニング資料を利用してから失敗になりましたら、当社は全額で返金します。それに、一年間の無料更新サービスを提供することができます。

試験番号：HP0-S14問題集
試験科目：HP 「Design and Implementation of HP SIM for ISS Solutions」
問題と解答：全125問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/HP0-S14.html

NO.1 Which function regarding virtual machines is new to HP SIM 5.1?
A. discovery of HP virtual machine systems
B. support for Microsoft Virtual Server 2005 remote console through a Mozilla browser
C. use of VMware Management Interface as a stand-alone tool to launch the remote console
D. not necessary to install VMware Remote Console on the system from which you are launching remote
console
Answer: A

HP   HP0-S14   HP0-S14   HP0-S14練習問題

NO.2 Which HP SIM procedure determines the system management protocol of a detected device and its
operating system?
A. polling
B. discovery
C. identification
D. data collection
Answer: C

HP認定証   HP0-S14   HP0-S14参考書   HP0-S14認証試験

NO.3 When is it necessary to install the WMI Mapper on a Windows-based Central Management Server
(CMS)?
A. when at least one device managed by the CMS is running a Linux operating system
B. when at least one device managed by the CMS is running an HP-UX operating system
C. when at least one device managed by the CMS is running a Windows operating system
D. when at least one device managed by the CMS is running an HP OpenVMS operating system
Answer: C

HP参考書   HP0-S14練習問題   HP0-S14認定資格   HP0-S14   HP0-S14

NO.4 Which protocol requires a special HP SIM component that configures the managed device to send
alerts to the Central Management Server (CMS) because it does not provide alerting capabilities?
A. DMI
B. WMI
C. HTTP
D. SNMP
E. WBEM
Answer: B

HP   HP0-S14   HP0-S14

NO.5 Which protocols are used by HP SIM to identify nodes running Linux? (Select three.)
A. DMI
B. WMI
C. SSH
D. HTTP
E. SNMP
F. WBEM
Answer: DEF

HP   HP0-S14参考書   HP0-S14認定証   HP0-S14   HP0-S14

NO.6 Which protocols are used in HP SIM to query events from failing devices? (Select two.)
A. Secure Sockets Layer (SSL)
B. HyperText Transfer Protocol (HTTP)
C. Windows Management Instrumentation (WMI)
D. Web-Based Enterprise Management (WBEM)
E. Simple Network Management Protocol (SNMP)
Answer: CE

HP認定資格   HP0-S14   HP0-S14   HP0-S14認定資格   HP0-S14

NO.7 What happens when HP Storage Essentials integrates with HP SIM? (Select two.)
A. SNMP for storage devices is disabled.
B. Data collection from SMI-S devices in HP SIM is disabled.
C. All storage-related events are forwarded to Storage Essentials.
D. Storage devices get marked as managed by Storage Essentials.
E. A new Storage Essentials user is added to the HP SIM user database.
Answer: BD

HP認定証   HP0-S14   HP0-S14   HP0-S14認定証

NO.8 You find a 'critical' status in the Virtual Machine Management (VMM) column in HP SIM for the host
server running Microsoft Virtual Server 2005. What does this mean?
A. The virtual machine guest is in a state requiring attention.
B. The virtual machine host is licensed but is not currently communicating with VMM.
C. The VMM agent is installed on the virtual machine host but the host is not licensed.
D. The VMM agent is installed on the server but the server is not a virtual machine host.
Answer: B

HP問題集   HP0-S14   HP0-S14過去問

NO.9 When is system polling initiated?
A. when a system has generated an error condition
B. when a new system is added to the HP SIM database
C. when the HP SIM central management server (CMS) powers on
D. when HP SIM receives an alert from a managed system to determine system status
Answer: D

HP   HP0-S14認定試験   HP0-S14   HP0-S14   HP0-S14   HP0-S14認定試験

NO.10 When performing a Virtual to Physical migration (V2P), what are some prerequisites for the source
virtual machine? (Select two.)
A. Stop the HP SIM management agents on the virtual machine guest.
B. Insert the SMP Boot CD into the CD-ROM of the virtual machine guest.
C. Verify that the source virtual machine guest is powered off or suspended.
D. Verify that the source virtual machine host is licensed and managed by VMM.
E. Ensure that all network connections on the virtual machine guest have DHCP IP addresses.
Answer: CD

HP認証試験   HP0-S14過去問   HP0-S14   HP0-S14   HP0-S14

NO.11 Click the Exhibit button.
Which MX command generated the output shown in the exhibit?
A. mxtool
B. mxuser
C. mxauth
D. mxtoolbox
Answer: A

HP認定試験   HP0-S14練習問題   HP0-S14   HP0-S14問題集   HP0-S14認証試験

NO.12 HP SIM 5.1 removes support for which product?
A. Oracle9i on HP-UX systems
B. HP BladeSystem Integrated Manager
C. PostgreSQL on x64 Linux operating systems
D. Insight Control Management Integrated Installer
Answer: C

HP   HP0-S14   HP0-S14   HP0-S14   HP0-S14認定証   HP0-S14認定証

NO.13 Which HP SIM process determines the associations between a management processor and its server,
a server blade and its enclosure, and an enclosure and its rack?
A. polling
B. discovery
C. identification
D. data collection
Answer: C

HP認定資格   HP0-S14   HP0-S14   HP0-S14   HP0-S14

NO.14 Which function of the command mxquery is new to HP SIM 5.1?
A. The mxquery command can provide output in XML format.
B. The language of the query results depends on the CMS locale.
C. Users with limited configuration rights privileges can execute mxquery.
D. To run mxquery, you no longer need access to the file system where HP SIM is installed.
Answer: A

HP問題集   HP0-S14   HP0-S14認定資格

NO.15 Which package integrates with HP SIM 5.1 to support monitoring and management of Itanium-based
server blades running HP-UX?
A. HP Integrity Essentials
B. HP ProLiant Essentials
C. HP OpenView Operations
D. HP SmartStart Scripting toolkit
Answer: A

HP   HP0-S14   HP0-S14参考書   HP0-S14

NO.16 Which types of HP Systems Insight Manager tools can be run on target systems? (Select three.)
A. XML-based type aware
B. all-system aware (ASA)
C. Intel system aware (ISA)
D. web launch aware (WLA)
E. single-system aware (SSA)
F. multiple-system aware (MSA)
Answer: DEF

HP参考書   HP0-S14認定証   HP0-S14   HP0-S14過去問   HP0-S14

NO.17 HP SIM 5.1 features API support to allow dynamic creation of new event types. What does this
support enable you to do?
A. Modify event types without having full configuration rights.
B. Modify event types without manually updating the HP SIM database.
C. Add event types without restarting the HP SIM central management server (CMS).
D. Add event types without manually refreshing any event collections that display in the CMS.
Answer: C

HP認証試験   HP0-S14過去問   HP0-S14   HP0-S14

NO.18 What does HP SIM 5.1 require to access management information on an HP ProLiant server running
Microsoft Windows Server 2003?
A. DMI
B. SSH-2
C. WBEM
D. Open SSH
E. WMI Mapper proxy
Answer: E

HP   HP0-S14認証試験   HP0-S14   HP0-S14

NO.19 When a system administrator attempts to update the firmware on a BladeSystem GbE2c interconnect
switch using HP SIM, the update is unsuccessful. What could be the reason?
A. The HP SIM server is running on Linux.
B. The VCA agent on the GbE2c interconnect switch is not active.
C. The GbE2c interconnect switch is not licensed for firmware upgrades.
D. The GbE2c interconnect switch can only be upgraded using the serial connection.
Answer: A

HP問題集   HP0-S14   HP0-S14過去問   HP0-S14

NO.20 You have recently added a ProLiant BL20p G1 to the server blade enclosure monitored by PMP. At the
PMP License Administration page, this new server does not appear in the list of servers. Why?
A. The server does not have a valid serial number.
B. The server is too old and not supported by PMP.
C. The server has not yet been discovered by HP SIM.
D. The operating system running on this server is not supported.
E. The HP Insight Management Agents on this server are not at the required version.
Answer: C

HP   HP0-S14認定証   HP0-S14

JapanCertは長い歴史を持っているHPのHP0-S14トレーニング資料が提供されるサイトです。IT領域で長い時間に存在していますから、現在のよく知られていて、知名度が高い状況になりました。これは受験生の皆様を助けた結果です。JapanCertが提供したHPのHP0-S14トレーニング資料は問題と解答に含まれていて、IT技術専門家たちによって開発されたものです。HPのHP0-S14認定試験を受けたいのなら、JapanCertを選ぶのは疑いないことです。