2013年9月14日星期六

Avayaの6102-1の試験問題集が登場します

同じ目的を達成するためにいろいろな方法があって、多くの人がいい仕事とすばらしい生活を人生の目的にしています。JapanCertが提供した研修ツールはAvayaの6102-1の認定試験に向けて学習資料やシミュレーション訓練宿題で、重要なのは試験に近い練習問題と解答を提供いたします。JapanCert を選ばれば短時間にITの知識を身につけることができて、高い点数をとられます。

Avayaの6102-1試験に受かることを通じて現在の激しい競争があるIT業種で昇進したくて、IT領域で専門的な技能を強化したいのなら、豊富なプロ知識と長年の努力が必要です。Avayaの6102-1試験に受かるのはあなたが自分をIT業種にアピールする方法の一つです。でも、試験に合格するために大量な時間とエネルギーを費やすことはなく、JapanCertのAvayaの6102-1試験トレーニング資料を選んだらいいです。JapanCertのトレーニング資料はIT認証試験に受かるために特別に研究されたものですから、この資料を手に入れたら難しいAvayaの6102-1認定試験に気楽に合格することができるようになります。

JapanCert Avayaの6102-1試験スタディガイドはあなたのキャリアの灯台になれます。JapanCertは全ての受かるべき6102-1試験を含めていますから、Pass4を利用したら、あなたは試験に合格することができるようになります。これは絶対に賢明な決断です。恐い研究の中から逸することができます。JapanCertがあなたのヘルパーで、JapanCertを手に入れたら、半分の労力でも二倍の効果を得ることができます。

Avayaの6102-1の認定試験に合格すれば、就職機会が多くなります。この試験に合格すれば君の専門知識がとても強いを証明し得ます。Avayaの6102-1の認定試験は君の実力を考察するテストでございます。

進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くJapanCertのAvayaの6102-1試験トレーニング資料を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、100パーセントの合格率を保証できますから、躊躇わずに購入しましょう。

あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。JapanCert Avayaの6102-1試験問題集はあなたが自分の目標を達成することを助けられます。JapanCert Avayaの6102-1問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の100パーセント真実な解答を提供することを保証します。

試験番号:6102-1問題集
試験科目:Avaya 「Avaya Virtual Services Platform 9000 Implementation Exam」
最近更新時間:2013-09-13
問題と解答:67

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/6102-1.html

NO.1 Which command can be used to determine the management IPv6 address on the
Virtual Services
Platform (VSP) O000?
A. Show interfaces mgmtEthernet 1/1
B. Show ip interface vrf mgmtRouter
C. Show ipv6 interface vrf mgmtRouter
D. Show ipv6 address interface
Answer: D

Avaya   6102-1参考書   6102-1   6102-1

NO.2 Which two management ports are available on the CP module? (Choose two.)
A. Serial interface
B. USB (host) interface
C. Ethernet interface
D. Modem interface
Answer: A,D

Avaya   6102-1認定証   6102-1練習問題   6102-1認定証   6102-1

NO.3 Internet Group Management Protocol (IGMP) is used by the IP Multicast router, to
learn about the
existence of host group members on their directly attached subnets.
Which statement about IGMP is true?
A. The IP Multicast routers get this information by listening for IP hosts broadcasting IGMP
queries and
reporting their host group memberships.
B. The IP Multicast routers get this information by broadcasting IGMP queries and listening
for IP hosts
reporting their host group memberships.
C. The IP Multicast routers get this information by recognizing the modified MAC address of a
Multicast
packet and adding that MAC address to the Multicast tree.
D. The IP Multicast routers get this information by listening for Multicast Servers broadcasting
IGMP
queries and listening for IP hosts reporting their host group memberships.
Answer: B

Avaya   6102-1   6102-1   6102-1認定資格

NO.4 A Virtual Services Platform (VSP) 9000 chassis has the following connections:
Four 10GBaseER core connections in ports 3/4 , 3/8, 4/4, 4/8 (9024XL cards)
40 Copper 100BaseT connections for server aggregation (9048GT card)
How many Switch Fabric (SF) modules need to be installed in the roar of the chassis to
ensure that all of
the IO cards operate at full performance, even if a single SF modules fails (n + 1 SF
redundancy)?
A. Install three SFs in St modules 1, 2, 4.
B. Install four SFs in SF modules 1, 2, 3, 4.
C. Install five SFs in SF modules 1, 2, 3, 4, 5.
D. Install six SFs in SF modules 1, 2, 3, 4, 5, 6.
Answer: D

Avaya   6102-1   6102-1   6102-1   6102-1認定証

NO.5 Given the following ACL applied to an interface:
filter acl ace 1 5 name "xxxx" filter acl ace action 1 5 deny
filter acl ace ip 1 5 ip-protocol-type eq tcp
filter acl ace protocol 1 5 dst-port eq 23
filter acl ace 1 5 enable
What is the result of this filter?
A. permit telnet traffic
B. deny ftp traffic
C. permit only tcp traffic
D. deny telnet traffic
E. deny only tcp traffic
Answer: D

Avaya   6102-1   6102-1   6102-1

NO.6 A Split Multi Link Trunking (SMIT) for switch clustering is being configured.
Which statement is a configuration requirement for the SMIT?
A. The CP-Limit is configured on edge switch stacks.
B. VLANs that are defined on the SMLT are also defined on the tote IST.
C. Neighboring edge switch stacks should be connected to each other via the DMLT
connection to add
resilient paths in the event of an SMLT failure.
D. Alternate the primary path of the SMLT connection Lo load balance the switch core.
Answer: B

Avaya   6102-1   6102-1   6102-1認定試験   6102-1

NO.7 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in
the existing
Virtual Services Platform (VSP) 9000 core. The technician needs to configure VRF on the
VSP 9000.
Which statement represents the proper order for configuring a new VRF?
A. Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new
VRF.
B. Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new
VRF.
C. Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new
VRF.
D. Create VRF, create a new VLAN, move the VLAN to the new VRF, and add an IP
address.
Answer: D

Avaya認証試験   6102-1認証試験   6102-1   6102-1参考書

NO.8 Which types of packets will port mirroring not capture.?
A. Packets that are dropped on the ingress MAC
B. Packets that are destined for the standby CP
C. Packets that are properly forwarded through the VSP
D. Packets that have a destination address of 255.255.255.255
Answer: A

Avaya   6102-1   6102-1   6102-1   6102-1

NO.9 A customer is mirroring multiple ports to a single monitor port.
What happens if the mirrored traffic exceeds the bandwidth of the monitor port?
A. The traffic will be buffered until there is available bandwidth.
B. The excess traffic will be dropped randomly.
C. The excess traffic will be dropped based upon the mirror priority of the ingress port.
D. The excess traffic will be dropped based upon the port priority of the ingress port.
Answer: B

Avaya認定証   6102-1参考書   6102-1認定証

NO.10 Avaya recommends that the Switch Fabric (SF) modules be installed in both Slot SF1
and Slot SF4.
What is the reason behind this recommendation?
A. It provides optimal load balancing between the SF modules.
B. It provides redundancy tor the bandwidth management.
C. It takes full advantage of the orthogonal midplane architecture.
D. It provides redundancy in case of a power supply failure.
E. It provides lossless SF failover.
Answer: B

Avaya   6102-1認定証   6102-1認定試験

JapanCertは最新の1z0-593問題集と高品質の000-122問題と回答を提供します。JapanCertの100-500 VCEテストエンジンとCAT-221試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の1Z0-478 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/6102-1.html

没有评论:

发表评论