IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてAlcatel-Lucentの4A0-106試験に参加して認可を得たくて、Alcatel-Lucent の4A0-106試験が難度の高いので合格率も比較的低いです。Alcatel-Lucentの4A0-106試験を申し込むのは賢明な選択で今のは競争の激しいIT業界では、絶えず自分を高めるべきです。しかし多くの選択肢があるので君はきっと悩んでいましょう。
夢を持ったら実現するために頑張ってください。「信仰は偉大な感情で、創造の力になれます。」とゴーリキーは述べました。私の夢は最高のIT専門家になることです。その夢は私にとってはるか遠いです。でも、成功へのショートカットがを見つけました。JapanCertのAlcatel-Lucentの4A0-106試験トレーニング資料を利用して気楽に試験に合格しました。それはコストパフォーマンスが非常に高い資料ですから、もしあなたも私と同じIT夢を持っていたら、JapanCertのAlcatel-Lucentの4A0-106試験トレーニング資料を利用してください。それはあなたが夢を実現することを助けられます。
Alcatel-Lucentの4A0-106認定試験がIT業界には極めて重要な地位があるがよく分かりましょう。試験に合格するのは簡単ではないもよくわかりましょう。“簡単に合格できる方法がありますか？”答えはもちろんですよ。JapanCertはこの問題を着々解決できますよ。IT専門家がAlcatel-Lucentの4A0-106認定試験に関する特別な問題集を開発しています。それをもって、試験は問題になりませんよ。
Alcatel-Lucentの4A0-106の認定試験に受かることはIT業種に従事している皆さんの夢です。あなたは夢を実現したいのなら、プロなトレーニングを選んだらいいです。JapanCertは専門的にIT認証トレーニング資料を提供するサイトです。JapanCertはあなたのそばにいてさしあげて、あなたの成功を保障します。あなたの目標はどんなに高くても、JapanCertはその目標を現実にすることができます。
試験番号：4A0-106問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Virtual Private Routed Networks」
最近更新時間：2013-09-17
問題と解答：61
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/4A0-106.html
NO.1 Choose the answer that best completes the following sentence. The CE device is typically configured
with ___________________________.
A. A single routing protocol for exchanging routes with both the internal customer routers and with the PE
B. MP-BGP to exchange routes with the PE.
C. MPLS and a routing protocol for the exchange of labels and routes with the PE
D. MPLS for exchanging labels with other CE devices
E. A routing protocol for exchanging routes with the internal customer routers and a routing protocol for
exchanging routes with the PE
Answer: E
Alcatel-Lucent認定試験 4A0-106練習問題 4A0-106 4A0-106認定証 4A0-106
NO.2 What are the two primary problems the service provider must consider when providing traditional
Layer 3 VPN services using only a single common routing table in the provider core? (Choose two)
A. Memory exhaustion in the provider core
B. Route leaking between the customer networks
C. CPU utilization for route processing
D. Unwanted packet forwarding between customer networks
Answer: BD
Alcatel-Lucent 4A0-106 4A0-106 4A0-106 4A0-106認証試験 4A0-106認証試験
NO.3 What are the main functions of a Layer 3 VPN? (Choose three).
A. Distributing customer routing information between sites
B. Forwarding customer data packets
C. Providing an integrated billing solution
D. Maintaining separation between distinct customer networks
E. Allowing the implementation of Layer 3 devices in the provider core
Answer: ABD
Alcatel-Lucent 4A0-106認定証 4A0-106 4A0-106練習問題
NO.4 In a VPRN the PE device is configured to run which of the following protocols? (Choose three.)
A. MP-BGP for exchanging customer routes with other PEs
B. A routing protocol for exchanging customer routes with the CE
C. MPLS for exchanging labels with other provider core devices
D. MPLS for exchanging labels with the CE devices
E. Targeted LDP for exchanging VPRN labels with other PE devices
F. A label signaling protocol for defining transport tunnels between PE and CE devices
Answer: ABC
Alcatel-Lucent 4A0-106 4A0-106認証試験
NO.5 When a Service Provider offers VPRN services to its customers, which of the following functions are
expected to be the responsibility of the Service Provider? (Choose three)
A. Distributing the customer generated labels between sites
B. Distributing the customer routing information between sitesDistributing the customer? routing
information between sites
C. Forwarding the customer originated data packets to the appropriate destination
D. Forwarding the provider originated data packets to the appropriate customer site
E. Providing secure layer 3 routing exchange between sites
Answer: BCE
Alcatel-Lucent 4A0-106 4A0-106認証試験 4A0-106 4A0-106
NO.6 Which of the following statements are true regarding P devices in an MPLS VPRN? (Choose two.)
A. Participate in service provider core routing
B. P devices are not required to be MPLS enabled. MPLS is only required on the PE devices
C. Run a common routing protocol with the CE router
D. Must support MP-BGP
E. Do not have any connections to the CE
F. Must be aware of the VPRNs
Answer: AE
Alcatel-Lucent 4A0-106認定試験 4A0-106認定試験 4A0-106
NO.7 Complete the following statement. In a VPRN, the label signaled by RSVP-TE is used to
____________________.
A. Identify the egress PE in the MPLS domain
B. Signal the egress VPRN ID
C. Identify the ingress PE in the MPLS domain
D. transport route updates between PEs
Answer: A
Alcatel-Lucent 4A0-106認定証 4A0-106認定証 4A0-106認証試験 4A0-106
NO.8 In a traditional layer 3 VPN which of the following will be an issue when there is overlapping address
space between two customers? Choose the best answer.
A. There will be increased memory usage on the PE
B. There will be increased CPU utilization on the PE
C. The CE will reject the overlapping prefix
D. The PE will not recognize the prefixes as being different
E. There is no issue with overlapping address space in a traditional Layer 3 VPN
Answer: D
Alcatel-Lucent 4A0-106問題集 4A0-106参考書 4A0-106 4A0-106認証試験
NO.9 Which of the following terms also correctly describes a Layer 3 VPN? (Choose three)
A. VPRN
B. BGP/MPLS VPN
C. VLL
D. VPLS
E. IP-VPN
F. ePipe
Answer: ABE
Alcatel-Lucent練習問題 4A0-106 4A0-106 4A0-106認定資格 4A0-106問題集 4A0-106
NO.10 Complete the following statement. In a VPRN, the label signaled by RSVP-TE is used to
____________________.
A. Identify the egress PE in the MPLS domain
B. Signal the egress VPRN ID
C. Identify the ingress PE in the MPLS domain
D. transport route updates between PEs
Answer: A
Alcatel-Lucent 4A0-106 4A0-106参考書 4A0-106認定試験 4A0-106
JapanCertは最新の70-492問題集と高品質の000-585問題と回答を提供します。JapanCertの70-484 VCEテストエンジンと70-341試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP2-E56 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论