関連する研究資料によって、IBMの000-183認定試験は非常に難しいです。でも、心配することはないですよ。JapanCertがありますから。JapanCertには豊富な経験を持っているIT業種の専門家が組み立てられた団体があって、彼らは長年の研究をして、最も先進的なIBMの000-183試験トレーニング資料を作成しました。資料は問題集と解答が含まれています。JapanCertはあなたが試験に合格するために一番適用なソースサイトです。JapanCertのIBMの000-183試験トレーニング資料を選んだら、あなたの試験に大きなヘルプをもたらせます。
話と行動の距離はどのぐらいありますか。これは人の心によることです。意志が強い人にとって、行動は目と鼻の先にあるのです。あなたはきっとこのような人でしょう。IBMの000-183認定試験に申し込んだ以上、試験に合格しなければならないです。これもあなたの意志が強いことを表示する方法です。JapanCertが提供したトレーニング資料はインターネットで最高のものです。IBMの000-183認定試験に合格したいのなら、JapanCertのIBMの000-183試験トレーニング資料を利用してください。
JapanCertのIBMの000-183試験のトレーニングキットはJapanCertのIT技術専門家たちによって開発されたのです。そのデザインは当面の急速に変化するIT市場と密接な関係があります。JapanCertのトレーニングはあなたを助けて継続的に発展している技術を利用して、問題を解決する能力を高めると同時に仕事についての満足度を向上させることができます。JapanCertのIBMの000-183の認証したカバー率は１００パーセントに達したのですから、弊社の問題と解答を利用する限り、あなたがきっと気楽に試験に合格することを保証します。
試験番号：000-183問題集
試験科目：IBM 「IBM WebSphere Mesage Broker V7.0, Solution Development」
最近更新時間：2014-03-13
問題と解答：114
JapanCertは受験者に向かって試験について問題を解決する受験資源を提供するサービスのサイトで、さまざまな受験生によって別のトレーニングコースを提供いたします。受験者はJapanCertを通って順調に試験に合格する人がとても多くなのでJapanCertがIT業界の中で高い名声を得ました。
適切なトレーニングを選ぶのは成功の保証になれますが、何を選ぶのは非常に重要なことです。JapanCertはとても人気がありますから、それを選ばない理由はないです。もちろん、完璧なトレーニング資料を差し上げましたが、もしあなたに向いていないのなら無用になりますから、JapanCertを利用する前に、一部の問題と解答を無料にダウンロードしてみることができます。そうしたら、完全な試験準備をして、気楽に試験を受かることができるようになります。それも何千何万の受験生がJapanCertを選んだ重要な理由です。JapanCertは一番よい、一番実用的な、一番完全な試験トレーニング資料を提供していますから、受験生たちが試験を準備することに意重要な助けになります。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/000-183.html
NO.1 A developer needs to call a request/response web service from a message flow.Knowing response
messages may not arrive in the same order as the requests, what set of processing nodes will
automatically set the required WS-Addressing standard that assures message correlation?
A.SOAPInput and SOAPReply
B.SOAPExtract and SOAPReply
C.SOAPRequest and SOAPReply
D.SOAPAsyncRequest and SOAPAsyncResponse
Answer: D
IBM認証試験 000-183 000-183参考書 000-183 000-183
NO.2 The following flow processes data from an input queue and builds a file.A Timeout Notification node
has been configured to send a message to the Finish File ¯ s t e r m i na l o f t he ile Output node once every
hour.As a result, a file named hourly Record Collection.dat will be written to theFinish File terminal of the
File Output node once every hour.As a result, a file named hourly Record Collection.dat?will be written to
the designated destination directory.
It is expected the previous file will be removed before the next file is written in its place.If this has not
happened, what are the options available to the solution developer on the File Output node?
A.Overwrite (replace) the old file or append to the old file.
B.Overwrite (replace) the old file or rename the old file in place by adding a timestamp or throw an
exception.
C.Overwrite (replace) the old file or archive the old file with or without a time stamp appended to the file
name or throw an exception.
D.Overwrite (replace) the old file or append to the old file or archive the old file (with or without a time
stamp appended to the file name.)
Answer: C
IBM過去問 000-183練習問題 000-183
NO.3 A developer has a message flow that consists of an MQInput node, Compute node and MQOutput
node.The message is parsed by the XMLNSC domain.The Compute node will extract the name and age
of each player, then send them onto the register players application to have the team registered.The input
message that the Compute node will be processing is shown below.
What MUST be done to access the information from the first player?
A.Set OutputRoot.XMLNSC.RegPlayer.Player[NextCount] = InputBody.Body.Player[1]
B.Set OutputRoot.XMLNSC.RegPlayer.Player[NextCount] = InputBody.DetailedMsg.Body.Player[1]
C.Set OutputRoot.XMLNSC.RegPlayer.Player[NextCount] = InputRoot.DetailedMsg.Body.Player[0]C.Set
OutputRoot.XMLNSC.RegPlayer.Player[NextCount] = InputRoot.DetailedMsg.Body.Player[0]
D.Set OutputRoot.XMLNSC.RegPlayer.Player[NextCount] = InputRoot.DetailedMsg.Body.Player[1]D.Set
OutputRoot.XMLNSC.RegPlayer.Player[NextCount] = InputRoot.DetailedMsg.Body.Player[1]
Answer: B
IBM 000-183 000-183認定試験 000-183
NO.4 A message flow reads a file, record by record.Based on the content of each record, it will be propagated
to one or more output queues.The File Input node has the Transaction property set to yes and all output
nodes are configured to be Automatic node has the transaction property set to yes and all output nodes
are configured to be automatic In the event that flow execution is interrupted by a hardware failure, which
one of the following is true?
A.Processing will resume at the beginning of the file; previously created messages will be duplicated.
B.Processing will resume at the beginning of the file; previously created messages will be backed out.
C.Processing of the file resumes at the last checkpoint; any extraneous messages will have been rolled
back.
D.The file will be deleted or archived depending on the setting of the File Input node; unprocessed
records will be missing from the output.
Answer: A
IBM認定資格 000-183認定資格 000-183 000-183認定試験
NO.5 Consider the following ESQL code snippet from a Compute node.
What is the value of OutputRoot.XMLNSC?
A.NULL
B.<Winner/>
C.<Winner Name="Robert"/>
D.<Winner><Name>Rocky</Name></Winner>
Answer: D
IBM過去問 000-183認定試験 000-183 000-183 000-183過去問
NO.6 A developer needs to create an asynchronous messaging application to connect to a third party which
uses a programming interface known as Message Queue Interface (MQI).Which transport protocol should
the developer use?
A.MQ
B.FTP
C.JMS
D.XMS
Answer: A
IBM過去問 000-183 000-183認定証 000-183練習問題
NO.7 The solution developer has been informed by the SAP team that the userid and password for the SAP
test environment needs to be replace
D.What is the EASIEST way to reconfigure userid and password for an SAP EIS adapter?
A.Modify the deployment descriptor in the affected bar files and redeploy them to all required locations.
B.Use the following command against the affected broker(s): mqsisetdbparms <brokername> -n
eis::<adaptername> -u <username> -p <password>
C.Use the following command against the affected broker(s): mqsichangeproperties <brokername> -c
eis::<adaptername> -o SAP -u <username> -p <password>
D.Rerun the Adapter Connection Wizard for the component, enter the updated values and redeploy the
component to all required locations.
Answer: B
IBM認定証 000-183 000-183練習問題 000-183
NO.8 A customer needs to dynamically choose which web service URL to call from a WSDL in the
WebSphere Service Registry and Repository (WSRR), based on a company acronym in the input
message received by Message Broker.Which node should the solution developer choose when
implementing this type of retrieval operation?
A.EndpointLookup
B.RegistryLookup
C.EndpointRetrieval
D.DatabaseRetrieval
Answer: A
IBM 000-183認定試験 000-183参考書 000-183参考書 000-183
NO.9 Which Message Broker artifact type is not analyzed by Impact Analysis?
A..esql
B..mset
C..msgmap
D..msgflow
Answer: B
IBM認証試験 000-183 000-183練習問題
NO.10 A company has decided to use WebSphere Message Broker to integrate several legacy systems which
generate batch files into the company WebSphere MQ backbone.What is the quickest way the developers
can accomplish this task?
A.Build a user defined node.
B.Create a user defined extension.
C.Create a program that processes the batch files into WebSphere MQ messages and then send the
messages to WebSphere Message Broker for processing.
D.Use the Record Distribution to WebSphere MQ one-way built-in pattern.
Answer: D
IBM認定資格 000-183認定証 000-183
NO.11 In a message flow, a developer needs to enrich an employee's record with information from a
database.Consider this input message.
Which of the ESQL statements in the response options will produce the following output message?
A.SET OutputRoot.XMLNSC.Employee.Name[] = (SELECT ITEM E.EmpName from Database.Employee
as E where E.EmpNumber = InputBody.Employee.Number);
B.SET OutputRoot.XMLNSC.Employee.Name[] = (SELECT E.EmpName AS Name from
Database.Employee as E where E.EmpNumber = InputBody.Employee.Number);
C.SET OutputRoot.XMLNSC.Employee = THE(SELECT E.EmpName from Database.Employee as E
where E.EmpNumber = InputBody.Employee.Number);
D.SET OutputRoot.XMLNSC.Employee = THE(SELECT ITEM E.EmpName AS Name from
Database.Employee as E where E.EmpNumber = InputBody.Employee.Number);
Answer: A
IBM 000-183 000-183 000-183 000-183 000-183
NO.12 A developer is tasked with designing a message flow, utilizing an XSLTransform node.Which location is
searched first by the broker, to determine the name of the style sheet to use?
A.The LocalEnvironment.
B.The BAR file overrides.
C.The XSLTransform node properties.
D.Inside the message XML data.
Answer: D
IBM認定証 000-183 000-183認定資格 000-183練習問題 000-183
NO.13 When a message is received by an Input node in a message flow, the message assembly is
created.Which tree or trees are populated when an error free message is received by a FileInput node?
A.The Message tree only.
B.The Message tree and Environment tree.
C.The Message tree and LocalEnvironment tree.
D.The Message tree, Environment tree, LocalEnvironment tree, and ExceptionList tree.
Answer: C
IBM認定証 000-183 000-183問題集 000-183認定証
NO.14 View the Exhibit:
The above flow processes a large incoming file line by line once every four hours.Performance is
unsatisfactory even though the server has spare memory and unused processors.Configuring additional
instances does not improve this.The following pair of flows was suggested by an architect.The first flow
will slice the incoming file into messages without any further processing, which is to be done by the
second flow.
What is the expected outcome if the second flow is configured with a large number of additional
instances?
A.Throughput will improve somewhat.Message sequence will not be affected.
B.Throughput will be unaffecte
D.Message sequence will most likely be affected.
C.Throughput will improve significantly.Message sequence will most likely be affected.
D.Throughput will deteriorate slightly due to the extra queuing.Message sequence will not be affected.
Answer: C
IBM過去問 000-183 000-183 000-183 000-183問題集
NO.15 A large company needs to interface their legacy application with a newly acquired Enterprise
Information System (EIS) application called Siebel CRM.Which transport service will the developer use to
discover metadata and send requests to the EIS system?
A.MQ Link for R3
B.WebSphere Broker Adapters
C.WebSphere Broker File Transport
D.WebSphere Business Integration Adapter
Answer: B
IBM 000-183 000-183認定資格 000-183認定資格
NO.16 As part of an Order Process flow, a developer must add a new section to an existing XML message.The
relevant section of the incoming message is as follows:
The developer must add the following Order Item, to fall in the correct numeric sequence: <OrderItem>
<Number>333</Number> </OrderItem> How would the developer achieve this?
A.DECLARE FieldRef REFERENCE TO OutputRoot; CREATE FIELD
OutputRoot.XMLNSC.OrderMsg.OrderItem[3].Number AS FieldRef; SET FieldRef = '333';
B.DECLARE FieldRef REFERENCE TO OutputRoot.XMLNSC.OrderMsg.OrderItem[2]; CREATE
NEXTCHILD OF FieldRef NAME 'Number'; SET FieldRef = '333';
C.DECLARE FieldRef REFERENCE TO OutputRoot.XMLNSC.OrderMsg.OrderItem[2]; CREATE
NEXTSIBLING OF FieldRef NAME 'OrderItem'; SET FieldRef.Number = '333';
D.DECLARE FieldRef REFERENCE TO OutputRoot.XMLNSC.OrderMsg.OrderItem[2]; CREATE
NEXTSIBLING OF FieldRef AS FieldRef NAME 'OrderItem'; SET FieldRef.Number = '333';
Answer: D
IBM 000-183過去問 000-183 000-183 000-183
NO.17 Consider the following two implementations of a request/response pattern.1) Asynchronous with a
separate flow for the response logic using an MQInput node
2)
Synchronous, completing the round trip in the same flow pulling the response message with an MQGet
node
Which of the following is FALSE?
A.Multiple flow instances will not help throughput in either implementation.
B.The synchronous implementation will require more memory, especially in scenarios with large
messages and high throughput requirements.
C.Given sufficient resources, the synchronous implementation will perform better in cases where large
amounts of data (i
没有评论:
发表评论