2014年3月18日星期二

最新のEMC E20-616試験の問題集

あなたは弊社の商品を買ったら一年間に無料でアップサービスが提供された認定試験に合格するまで利用しても喜んでいます。もしテストの内容が変われば、すぐにお客様に伝えます。弊社はあなた100%合格率を保証いたします。

もしあなたはまだ合格のためにEMC E20-616に大量の貴重な時間とエネルギーをかかって一生懸命準備し、EMC E20-616認証試験に合格するの近道が分からなくって、今はJapanCertが有効なEMC E20-616認定試験の合格の方法を提供して、君は半分の労力で倍の成果を取るの与えています。

EMCのE20-616認定試験は今IT業界の人気試験で多くのIT業界の専門の人士がITの関連の認証試験を取りたいです。EMCの認証試験の合格書を取ってから更にあなたのIT業界での仕事にとても助けがあると思います。

試験番号:E20-616問題集
試験科目:EMC 「Symmetrix Installation and Troubleshooting Specialist」
最近更新時間:2014-03-18
問題と解答:241

もうこれ以上尻込みしないでくださいよ。E20-616問題集の詳しい内容を知りたいなら、はやくJapanCertのサイトをクリックして取得してください。あなたは問題集の一部を無料でダウンロードすることができますから。E20-616問題集を購入する前に、JapanCertに行ってより多くの情報を読んでください。このサイトを深く知ったほうがいいですよ。それに、試験に失敗すれば全額返金のポリシーについて、事前に調べたほうがいいです。JapanCertは間違いなくあなたの利益を全面的に保護し、あなたの悩みを思いやるウェブサイトです。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/E20-616.html

NO.1 What is a major difference in director data flow between the Symmetrix 8000 series and a DMX-2?
A. An 8430 uses loop redundancy
B. An 8530's directors are connected to two data busses
C. Directors in a DMX-2 are connected to top high and bottom low
D. DMX-2 port bypass cards are connected directly to cache
Answer: B

EMC   E20-616認証試験   E20-616認証試験   E20-616認定資格

NO.2 Click the exhibit button.
You are viewing the rear of a Symmetrix DMX22000/3000 Card Cage. Where will you find ECM1?
A. 1
B. 2
C. 3
D. 4
Answer: B

EMC認定資格   E20-616認定資格   E20-616認定証   E20-616

NO.3 Which type of Symmetrix volume contains information on the dynamic mirror policy decisions, error
logging, event traces, code image storage, and a dedicated lost write area?
A. BCV
B. Data
C. DRV
D. SFS
Answer: D

EMC   E20-616過去問   E20-616認証試験   E20-616問題集   E20-616

NO.4 A customer wants to change Host Directors to support SRDF. What distinguishes one director type
from another within a Symmetrix 8000 series?
A. Director model number
B. Director revision
C. Emulation code
D. Enginuity code level
Answer: C

EMC   E20-616   E20-616認定試験   E20-616   E20-616参考書

NO.5 How is DPR enabled?
A. By the EMC z/OS Storage Manager
B. In the bin file
C. Inlines Command
D. On the host by z/OS
Answer: B

EMC   E20-616参考書   E20-616認証試験   E20-616問題集

NO.6 A customer wants to set up an FA port for a 10km distance connection. Which optic mode will meet the
customer's need?
A. Long wave, Fibre Multi Mode port
B. Long wave, Fibre Single Mode port
C. Short wave, Fibre Multi Mode port
D. Short wave, Fibre Single Mode port
Answer: B

EMC   E20-616   E20-616   E20-616

NO.7 When looking at the DMX FA Back Adapter, you notice that one of the SFPs is blue. What does this
mean?
A. Long wave, multi mode port
B. Long wave, single mode port
C. Short wave, multi mode port
D. Short wave, single mode port
Answer: B

EMC   E20-616問題集   E20-616問題集   E20-616認定試験

NO.8 A customer's AC power fails to a Symmetrix 8430/8530. In this case, which components will the
battery subsystem sustain?
A. Card cage and disks
B. Communication cards and service processors
C. Disk drives and memory
D. Memory cards and service processor
Answer: A

EMC参考書   E20-616   E20-616   E20-616

NO.9 What is a difference between a Symmetrix 8830 and a DMX-2?
A. An 8830 24-slot card cage is scalable
B. Disks on a DMX-2 are FC-AL
C. DMX-2 uses a cache interconnect multi-drop bus
D. Maximum system bandwidth on an 8830 is 16Gb/s
Answer: B

EMC   E20-616参考書   E20-616認定資格   E20-616

NO.10 All the memory slots in a DMX-1000 are occupied. In this case, what is run from the procedure Wizard
to perform Memory Replacement?
A. Add Memory Board script to the Universal slot script, run Replace Memory Board Script, and replace
that board
B. Remove Memory Board script first and then Add Memory Board Script
C. Replace Memory Board script
D. Upgrade Memory Board script
Answer: B

EMC認定証   E20-616   E20-616認定証   E20-616問題集

NO.11 Which component of a DMX-2 performs Front End, director-to-director communications?
A. CCM
B. ECM
C. LCC
D. PBC
Answer: A

EMC練習問題   E20-616参考書   E20-616   E20-616練習問題   E20-616

NO.12 Click the exhibit button.
You are viewing the rear of the DMX1000 card cage. Which card is ECM1?
A. A
B. B
C. C
D. D
Answer: B

EMC   E20-616   E20-616認定試験   E20-616

NO.13 A DMX-2 memory configuration containing four (4) memory boards is to be upgraded to larger size
cache boards. The upgrade results in a two (2) memory board configuration. How will the bandwidth of
the DMX-2 be affected by the upgrade?
A. Decreased by the smaller cache card count
B. Increased by the larger memory size
C. Unchanged, only memory size is affected
D. Will remain at the theoretical maximum
Answer: B

EMC   E20-616   E20-616認定資格

NO.14 When will a customer's host be able to access the data on a BCV?
A. After the BCV is established
B. After the BCV is split
C. When the BCV is created in the Bin
D. While the BCV is syncing with the data volume
Answer: B

EMC認定資格   E20-616参考書   E20-616   E20-616

NO.15 On a DMX1000P, how many DAs are required?
A. 2
B. 4
C. 6
D. 8
Answer: B

EMC   E20-616   E20-616認定試験   E20-616   E20-616

NO.16 Click the exhibit button.
You are viewing the rear of the DMX1000 card cage. Which card is CCM0?
A. A
B. B
C. C
D. D
Answer: D

EMC認定資格   E20-616認定証   E20-616   E20-616   E20-616認定証   E20-616

NO.17 What does the Interleave Service Policy manage during a read operation?
A. Reads the tracks from M1 and M2 randomly
B. Reads the tracks from M1 and M2 alternatively
C. Reads the tracks only from M1
D. Tracks measurements of I/O on logical volumes and chooses the appropriate mirror
Answer: B

EMC参考書   E20-616練習問題   E20-616認定試験

NO.18 A service processor fails to communicate with directors 1 through 8 in the DMX-2 series. Which
component can cause this failure?
A. CCM0
B. ECM0
C. ECM1
D. XCM
Answer: A

EMC過去問   E20-616認定証   E20-616認定資格   E20-616参考書

NO.19 When is the relationship between a data volume and a BCV created?
A. When the BCV is created in the bin file
B. When the BCV is established
C. When the BCV is split
D. When the BCV is varied on
Answer: B

EMC過去問   E20-616認定資格   E20-616過去問   E20-616   E20-616

NO.20 Click the exhibit button.
The customer has handed you this service alert error message. What is the error?
A. Alarm signal set
B. PC failed to call home due to communication problems
C. Temperature problems
D. Mirror device is not ready at time of periodic test
Answer: D

EMC認定証   E20-616   E20-616   E20-616認定資格

JapanCertは最新の642-242問題集と高品質のHP2-B97問題と回答を提供します。JapanCertの70-480 VCEテストエンジンとCAT-380試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のJN0-696 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/E20-616.html

没有评论:

发表评论