近年、IT業種の発展はますます速くなることにつれて、ITを勉強する人は急激に多くなりました。人々は自分が将来何か成績を作るようにずっと努力しています。HPのHP0-Y43試験はIT業種に欠くことができない認証ですから、試験に合格することに困っている人々はたくさんいます。ここで皆様に良い方法を教えてあげますよ。JapanCertが提供したHPのHP0-Y43トレーニング資料を利用する方法です。あなたが試験に合格することにヘルプをあげられますから。それにJapanCertは１００パーセント合格率を保証します。あなたが任意の損失がないようにもし試験に合格しなければJapanCertは全額で返金できます。
JapanCertはきみの貴重な時間を節約するだけでなく、 安心で順調に試験に合格するのを保証します。JapanCertは専門のIT業界での評判が高くて、あなたがインターネットでJapanCertの部分のHP HP0-Y43資料を無料でダウンロードして、弊社の正確率を確認してください。弊社の商品が好きなのは弊社のたのしいです。
試験番号：HP0-Y43問題集
試験科目：HP 「Implementing HP Network Infrastructure Solutions Exam」
最近更新時間：2014-01-27
問題と解答：62
成功した方法を見つけるだけで、失敗の言い訳をしないでください。HPのHP0-Y43試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。JapanCertのHPのHP0-Y43試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。
JapanCertはHPのHP0-Y43認定試験に受かりたい各受験生に明確かつ顕著なソリューションを提供しました。当社はHPのHP0-Y43認定試験の詳しい問題と解答を提供します。当社のIT専門家が最も経験と資格があるプロな人々で、我々が提供したテストの問題と解答は実際の認定試験と殆ど同じです。これは本当に素晴らしいことです。それにもっと大切なのは、JapanCertのサイトは世界的でHP0-Y43試験トレーニングによっての試験合格率が一番高いです。
JapanCertのHP0-Y43問題集を利用してみたらどうですか。この問題集は最近更新されたもので、実際試験で出題される可能性がある問題をすべて含んでいて、あなたが一回で成功することを保証できますから。この問題集は信じられないほどの良い成果を見せます。試験に失敗すればJapanCertは全額返金のことができますから、ご安心に問題集を利用してください。JapanCertのHP0-Y43試験参考書できっとあなたが望ましい成功を取られます。
今の競争の激しいIT業界ではHPのHP0-Y43試験にパスした方はメリットがおおくなります。給料もほかの人と比べて高くて仕事の内容も豊富です。でも、この試験はそれほど簡単ではありません。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/HP0-Y43.html
NO.1 A company has a service level agreement (SLA) with its service provider. The SLA specifies a 2 Mbps
committed information rate (CIR) and 20 KB committed burst size (CBS). Lately, during peak usage times,
the company has been experiencing brief periods of poor performance on its external connection
(GigabitEthernet port 2/0/1 on an HP 5800 switch).
How can the network administrator configure the Comware switch to address this problem?
A. Configure a traffic classifier that selects all traffic and a car traffic behavior that sets the CIR to 2 Mbps
and the CBS to 20 KB. Create a QoS policy that maps the classifier to the action and apply this policy as
an inbound policy on port GigabitEthernet 2/0/1.
B. Enable Strict Priority (SP) scheduling on port GigabitEthernet 2/0/1 and ensure that all inbound traffic is
marked with the correct priority.
C. Configure generic traffic shaping (GTS) on the GigabitEthernet port 2/0/1, setting the CIR to 2 Mbps
and the CBS to 20 KB.
D. Configure a traffic classifier that selects all traffic and a car traffic behavior that sets the CIR to 2 Mbps
and the CBS to 20 KB. Create a OoS policy that maps the classifier to the action and apply this policy as
an outbound policy on port GigabitEthernet 2/0/1.
Answer: C
HP HP0-Y43 HP0-Y43 HP0-Y43認定証
NO.2 What is the role of neighbor solicitation (NS) messages in the autoconfiguration of an IPv6 address.?
A. An IPv6 node sends an NS message to inform a node undergoing autoconfiguration that it is already
using a particular address.
B. An IPv6 node sends an NS message for its tentative address to determine whether another node is
using it.
C. An IPv6 node sends an NS message for the global prefix to prompt other IPv6 nodes to advertise the
addresses that they are using on that prefix.
D. An IPv6 node sends an NS message to prompt an IPv6 router on the link to advertise the global
prefixes associated with the link immediately.
Answer: B
HP過去問 HP0-Y43 HP0-Y43認定資格
NO.3 A company has a network that includes HP 5800 and 12500 switches. Usage demands on the
company's FTP servers have increased, causing performance issues during peak usage times. While
analyzing link utilization, the network administrator noticed that the most heavily utilized links experience
bursts of congestion, causing them to drop traffic. The links then experience brief periods of low utilization
followed by another burst of congestion. This pattern continues periodically throughout the peak utilization
time.
What should the network administrator do to attempt to create a more efficient traffic pattern on these
links?
A. Configure an outbound traffic policing policy on the ports in question, setting the CIR at about sixty
percent of the ports' capacity and the PIR at about eighty percent.
B. Apply Weighted Fair Queuing (WFQ) or Weighted Round Robin (WRR) scheduling in preference to
Strict Priority (SP) scheduling on the ports in question.
C. Configure inbound traffic policing policies on ports at the core, setting the CIR at about sixty percent of
the ports' capacity and the PIR at about eighty percent. Apply outbound generic traffic shaping (GTS) on
ports facing the core ports, setting the CIR equal to the CIR on the core ports.
D. Apply a WRED table to the ports in question, optionally adjusting the table values to drop lower priority
traffic first.
Answer: D
HP認定試験 HP0-Y43 HP0-Y43 HP0-Y43認定資格
NO.4 A network includes a mix of IGMPv2 and IGMPv3 endpoints and must support the following source
specific multicasting applications:
-Source: 10.1.4.2 and Group: 232.0.5.5
-Source: 10.1.4.12 and Group 232.0.6.6
The network is already implementing PIM-SM and IGMPv3. In order to support these applications, the HP
10500 switches that act as routers for the endpoints in question must support another feature. Which step
must the network administrator perform on each of these switches?
A. Create an SSM policy that includes 232.0.5.5 and 232.0.6.6 within its range
B. Enable IGMPv2 backward compatibility mode
C. Configure two SSM maps, each of which mapsa source to its multicast group
D. Enable PIM SSM on the interfaces that connect to the endpoints
Answer: C
HP HP0-Y43 HP0-Y43 HP0-Y43
NO.5 View the exhibit.
The exhibit shows a network with HP 5400 zl and 8200 zl switches throughout the core and edge. What is
one advantage of implementing routing on edge switches?
A. Typically, it is easier to implement user-based VLAN assignments.
B. The topology has higher redundancy because edge switches can take over routing roles when
necessary.
C. Typically, the network can use fewer total VLANs when edge switches implement routing.
D. Typically, it is easier to ensure that routed links between edge and core switches are fully utilized.
Answer: D
HP HP0-Y43練習問題 HP0-Y43過去問
NO.6 View the exhibits.
Exhibit 1
The frame has these characteristics:
-VLANID = 3
-802.1p = 3
-DSCP=32
-Source IP address = 10.1.1.5
Click here for Exhibit 2
The frame shown in Exhibit 1 arrives on an HP 5800 switch's GigabitEthernet port 1/0/1. QoS maps are at
their default settings. Based on the configuration shown in Exhibit 2, to which queue is the outbound
packet assigned?
A. 2
B. 3
C. 4
D. 5
Answer: D
HP認定証 HP0-Y43認定証 HP0-Y43認定証
NO.7 Which switch is best suited to act at the edge of a medium to large HP FlexFabric solution?
A. 10500
B. 5500
C. 9500
D. 5830
Answer: D
HP問題集 HP0-Y43参考書 HP0-Y43認定証 HP0-Y43認定試験 HP0-Y43参考書
NO.8 A customer requires an HP FlexCampus solution with a core that scales to 40/100G. Which HP switch
fabric meets this need?
A. the 7500's CLOS switch fabric
B. the 10500's CLOS switch fabric
C. the 7500's crossbar switch fabric
D. the 10500's crossbar switch fabric
Answer: B
HP HP0-Y43 HP0-Y43認定試験
NO.9 View the exhibit.
A network administrator wants to configure an HP 5800 switch to place all incoming traffic on the
GigabitEthernet 1/0/1 port in priority queue 3. However, one exception applies. All traffic incoming on that
port that is destined to UDP port 55555 should be forwarded in priority queue 4 and marked with DSCP
32.
Based on the current configurations shown in the exhibit, which further steps must the network
administrator perform? (Select two.)
A. Configure port GigabitEthernet 1>0/1 to trust DSCP
B. Apply QoS policy Policy1 as on inbound policyon port GigabitEthernet 1/0/l
C. Apply QoS policy Policy2 as on inbound policyon port GigabitEthernet 1/0/1
D. Create a OoS Ip-dscp mapthat maps Ip value 4 to DSCP02
E. Undo OoS trust on port GigabitEthernet 1/0/1
Answer: B,E
HP HP0-Y43 HP0-Y43 HP0-Y43過去問
NO.10 How can a high density of ports and high throughput at the core of an HP FlexNetwork save customers
money?
A. Intelligence is offloaded from the edge switches, enabling customers to save money on the most
numerous switches in their solutions.
B. The customer can combine the data center and campus LAN core into a single entity, reducing power
and cooling costs.
C. The customer no longer needs to deploy modular switches at the distribution level and the edge,
deploying more cost-effective stackable switches instead.
D. The architecture can be simplified, eliminating expensive distribution devices and reducing power and
cooling costs.
Answer: D
HP HP0-Y43 HP0-Y43認定資格
JapanCertは最新のCD0-001問題集と高品質のHP2-N35問題と回答を提供します。JapanCertのVCP-510 VCEテストエンジンと000-540試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の700-302 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论